New Masterpiece MP-10 coming in September

[KaRNiV8L PRiME]

SOURCE (http://www.tfw2005.com/transformers-news/japanese-transformers-40/new-masterpiece-coming-in-september---mp-10-171957/)


Reports are coming in about the next Masterpiece figure from Japan.

According to Joel from BigBadToyStore.com, who called it "MP-10"
We’ve just received word from Japan that the Transformers MP-10 will be released in September, the retail price in Japan is 22,000 yen, we have preorders listed at $249.99

The name has currently not yet been released, but we were told it is a ‘New’ figure and the name will be revealed soon.

Some are suggesting a new convoy, possibly powermaster!!!


No pictures yet. Just a placeholder blank image. Obviously "New" is not the full name, but It might lend credence to the rumors that the next MP is an all-new Convoy mold, as in "New Convoy". The retail price translates to about $278.50 USD. Whatever this puppy is, it's either a multi-pack, or BIG.

[Doubledealer]

Lugnut Supreme? :p

[kaiden]

its............. MP ERECTOR!

[Tober]

BBTS description says "long awaited". That and the price point would imply MP Soundwave to me. Still conspicuously absent from the MP line. The high price point could imply electronics and maybe minions...


I can dream can't I?

[Deceptic_Optic]

bumblebee? jazz? soundwave? or another dinobot?

[d*r*j*]

Could it be Galvatron?

[swoop]

It would be awesome if it was soundwave and his cassettes but as much as I want that I dont think it is or that we will be getting it any time soon.

With dotm coming out it would be a good time to do shockwave but again I don't think it'll be him either.

Theres a fair few rumours going around that it'll be another optimus prime and if its true and I think it is I'm gonna be pretty disappointed.

[canofwhoopass_87]

Another Optimus would be pretty anti climactic, Powermaster or not. Going alone the lines of Mr Tober, "..long awaited" would definitely be implying a much more well known/iconic character.

My guess is either MP Soundwave (with cassettes) or Galvatron. I reckon it's gona be a Decepticon character. The high price tag hints something big though. Maybe Devastator :D? *wishful thinking*

[kup]

I am guessing Galvatron to go along with Rodimus. It's a very close together release so maybe it is a delayed 2010 celebration figure.

[gamblor916]

It's big at 2 per case. Soundwave+ would be sweet but I do hope it's not another Convoy or movie related.

[canofwhoopass_87]

Nah I think they've learnt their lesson with movie MP's. Well I hope so anyway :p

[dirge]

Another Optimus would be pretty anti climactic, Powermaster or not.

I agree with this statement.

The smart ass in me wants to suggest that it'll be Time Warrior, but I'm more hoping it's a gestalt team (probably Devastator), Galvatron or Blitzwing.

[Hursticon]

Quoted from Seibertron.com (http://www.seibertron.com/transformers/news/masterpiece-10-optimus-prime/21368/):


Anticipation is building as to just who and what the recently announced Masterpiece MP-10 is.

Anonymous sources (and a little bit of reasoned guess work) reveal this upcoming MP figure to be none other than Optimus Prime with an improved trailer (ala MP-04). Details as we know to be rumored:

All new mold
Robot-mode size close to the i-Gear Faith Leader KO
Improved overall robot-mode and design
Better looking, more cartoon accurate head
Die-cast parts
Trailer
Truck-mode more convincing and realistic than MP 01
Truck-mode windscreen and grill better aligned than on previous G1 Optimus Prime toys
Accessories have not been decided upon yet


This is of course as of yet not 100% confirmed, our source may be mistaken as to some of the key details, but then again the same source has delivered reliable information about DOTM Leader Class Ironhide, Sentinel Prime, etc...

So yea, we're pretty sure this is true, but take it with a grain of salt - and watch that blood pressure...

HasTakTom Fail! :rolleyes:

If it is a MP PM Prime, that might make it a little better but I would've preferred anyone over another friggin' Prime! :mad:

[KaRNiV8L PRiME]

I wouldn't mind a PM-OP but I think it will be UM!

[Zippo]

Man thats one expensive toy!!

[Doubledealer]

I call bullsh**. Surely they wouldn't release another MP Prime before Soundwave, Galvatron, Kup etc

[ITZTRU]

I wouldn't mind a PM-OP but I think it will be UM!

THIS is sounding quite fitting! And would be awesome! As much as I'd prefer a Decepticon this time, UM with armour would be sweeeeeet! But pleeeeeease. I dont care if it's PM or not...just not another freakin Optimus Prime :( :( :(

[Hursticon]

I call bullsh**. Surely they wouldn't release another MP Prime before Soundwave, Galvatron, Kup etc

I'd like to think not but... :rolleyes:

Seriously, an MP Soundwave with the following MPs being Twin-Boxed MP Casettes? - Who wouldn't be all over that like a Fly to... ;)
(Or is that just me thinking Soundwave = Superior? :p:D)

[Tallestblue]

*sigh* My dream of a box set of Deluxe sized Constructicons is still just a dream.

[kup]

Anticipation is building as to just who and what the recently announced Masterpiece MP-10 is.

Anonymous sources (and a little bit of reasoned guess work) reveal this upcoming MP figure to be none other than Optimus Prime with an improved trailer (ala MP-04). Details as we know to be rumored:

All new mold
Robot-mode size close to the i-Gear Faith Leader KO
Improved overall robot-mode and design
Better looking, more cartoon accurate head
Die-cast parts
Trailer
Truck-mode more convincing and realistic than MP 01
Truck-mode windscreen and grill better aligned than on previous G1 Optimus Prime toys
Accessories have not been decided upon yet


This is of course as of yet not 100% confirmed, our source may be mistaken as to some of the key details, but then again the same source has delivered reliable information about DOTM Leader Class Ironhide, Sentinel Prime, etc...

So yea, we're pretty sure this is true, but take it with a grain of salt - and watch that blood pressure...

Lame! I already have an MP Prime, 2 actually..3 if you count Magnus. I don't need another MP Prime.

[kup]

I call bullsh**. Surely they wouldn't release another MP Prime before Soundwave, Galvatron, Kup etc

Don't underestimate Takara's obsession with Prime.

[Ode to a Grasshopper]

I wouldn't mind an official Faith Leader-sized Prime.

[Doubledealer]

I'd like to think not but... :rolleyes:

Seriously, an MP Soundwave with the following MPs being Twin-Boxed MP Casettes? - Who wouldn't be all over that like a Fly to... ;)
(Or is that just me thinking Soundwave = Superior? :p:D)

Soundwave as the next Decepticon MP makes the most sense to me too. You've got Megatron, his second in command: Starscream but where's the communications officer? Make it happen HasTak! :D

Having said that, I'd love for this 'bigger, more expensive' package to be revealed as MP Overlord. I can't think of anything cooler!

[Darthprimus]

My monies are on a MP Galvatron. second guess would be a Soundwave. as far as im concerned its been long awaited as there isn't one galv mold I actually like accept the little robot heroes galvatron.

[VERT]

Im all for Soundwave. But I would love them to start doing the other Dinobots and Galvatron would be fantastic. :D

But please not another Prime

[Verno]

I have no interest in the line generally, but even I don't want another Prime!

Giving the fans what they want, I thought thats what the line was about?!

[KaRNiV8L PRiME]

SOURCE (http://famitoy.blogspot.com/2011/04/pre-order-takaratomy-masterpiece-mp-10.html)



Pre-order: TakaraTomy Masterpiece MP-10 Convoy Ver.2

Transformers Masterpiece MP-10 Convoy Ver.2
Japan Retail Price: 22000Yen

*Picture to be revealed soon*

[valkyrie_76]

SOURCE (http://famitoy.blogspot.com/2011/04/pre-order-takaratomy-masterpiece-mp-10.html)

Heh....milking the cow man, milking the cow :D

[Doubledealer]

SOURCE (http://famitoy.blogspot.com/2011/04/pre-order-takaratomy-masterpiece-mp-10.html)

http://4.bp.blogspot.com/_wNJtF1XNe8Y/SJmC6C2gp2I/AAAAAAAAAfA/9AAOCq6Zero/s400/lolcat.jpg

[Tober]

Can't say I'm surprised, except about the price. How can it be worth 22000 JPY? :confused:

If it's great I'll bite, but DAMN! :mad:

[Hursticon]

Well, all I can say is that it doesn't take long (http://www.robotkingdom.com/services/eshop/main.php?action=details&CatType=&II=TFTRMP10&lang=us&CatID=) these days. :rolleyes:

[jaydisc]

lame lame lame

[gdmetro]

Hmm... is this a fixed version of MP Convoy? That is, smaller sized, new mould perhaps?

Thing is... how can they? I thought the recent release was the "final" one...

Ill wait for pics before making further judgments. :rolleyes:

[5FDP]

After MP Rodimus my interest in the line has gone south. The only way I would consider buying another MP would be if Shockwave was released.

[Doubledealer]

It would make sense

And this is why it won't happen. :p

[Vector Prime]

There's more likelihood of a MP Soundwave before a Shockwave I reckon (I hope) :p

[5FDP]

And this is why it won't happen. :p

Yeah, but I can dream :( I wouldn't even complain if they put a dirty-big orange cap on him.


There's more likelihood of a MP Soundwave before a Shockwave I reckon (I hope) :p

I could live with a MP Soundwave. Given the price point of MP-10, he would have to be a working cassette player :p

[liegeprime]

Heh....milking the cow man, milking the cow :D

Its already bleeding, stop milking the darn cow Hastaktom!!:p

[ITZTRU]

SOURCE (http://famitoy.blogspot.com/2011/04/pre-order-takaratomy-masterpiece-mp-10.html)

Woo. Hoo. All new convoy. Now with official TakaraTomy Roller.

Malibu Stacey. New hat.

[Doubledealer]

Whens that 'Stan Bush - Hasbro out of Touch' remix come out again? :p

[griffin]

Maybe this smaller version was the answer to the request for a proper MP Ultra Magnus, which would have been too big and expensive if done with the bigger, original Convoy/Optimus mould.
It's just a pity that it is being released under a banner that suggests 'one-off' centrepiece examples of iconic characters... it kinda cheapens that ideology by generating a second, smaller toy of a character already (heavily featured) in the line.

[Tober]

Yeah, I'm expecting something similar to what Yamato did with their going from the 1/48 to 1/60 Ver.2 Valkyries. They basically refined proportions and fixed problems that existed in the larger scale mold. One of the problems was incomparability between some armor parts.

I welcome a better Masterpiece Prime. Just not the inevitable repaints.

I also kinda approve of the way they are REALLY giving the finger to iGear. Hopefully we will see the MP Seeker Coneheads soon too.

[Verno]

It still might all be a ploy to throw us off the scent.

Come on Masterpiece Tigerhawk!

[Hursticon]

Come on Masterpiece Tigerhawk!

Whoocha Talkin' 'Bout Verno!?! - Beast Wars, Supreme Class - Tigerhawk IS a Masterpiece. :p;)

[Verno]

Whoocha Talkin' 'Bout Verno!?! - Beast Wars, Supreme Class - Tigerhawk IS a Masterpiece. :p;)

He's good, but he's not quite a Masterpiece. There are a few things that Takara could improve I'm sure, if they tried hard enough.

[Hursticon]

He's good, but he's not quite a Masterpiece. There are a few things that Takara could improve I'm sure, if they tried hard enough.

Like a Masterpiece Dinobot II?... Huh?, Huh? :D

[Verno]

Nah, the G1-ers can keep the Masterpiece line for now, they've had enough disappointments.

Just give me 30 more show accurate BW statues using the Mainframe models. That'll make them jealous!

[kup]

Maybe this smaller version was the answer to the request for a proper MP Ultra Magnus, which would have been too big and expensive if done with the bigger, original Convoy/Optimus mould.
It's just a pity that it is being released under a banner that suggests 'one-off' centrepiece examples of iconic characters... it kinda cheapens that ideology by generating a second, smaller toy of a character already (heavily featured) in the line.

I hope this is the case and there is a 'complete' Magnus but I seriously doubt it.

[1orion2many]

:DBumblebee isn't it obvious:D

[liegeprime]

I want the rest of the dinobots....:(:(

[SharkyMcShark]

Maybe one day they'll release another MP that's the right combination of interesting and not broken that will make me extend my investment in the line beyond G1 and Movie Starscream

[Eazy D]

I'm saddened

I was hoping for an MP galvatron in scale with rodimus
At that price point I even had faint hopes of an MP devastator.

A reworked prime is a major let down. The only thing that would save this for me is if they eventually used the smaller scale to make an ultra magnus armour set. PROPER MAGNUS PARTS!....not just a white prime repaint.

[kup]

I want the rest of the dinobots....:(:(

Seems that HasTak would prefer if the line was only composed of Bumblebees and Primes.

Having yet another Prime feels like such a waste of creativity.

[GoktimusPrime]

Seems that HasTak would prefer if the line was only composed of Bumblebees and Primes.

Having yet another Prime feels like such a waste of creativity.

Make it Ginrai! (would make more sense for the Japanese market too since Powermaster Prime never existed in Japan)

[griffin]

Of the non-Movie JP MPs (http://www.soundwavesoblivion.com/japanesemasterpiece.html), there have been 7 of the 16 using the Convoy/Optimus mould. I'm glad they announced that one was the 'Final' Version, or else we'd think they'd be milking that mould forever.
At least Hasbro only used the Optimus mould twice for their 5 (6 if including Rodimus) MP toys. Hmmm, it's still a significant percentage on both sides.

[1orion2many]

Keeping costs down to maximise profits is my guess with all the Primes:rolleyes:

[KillinSpoon]

Ahh well, easy pass.

[gdmetro]

Pre-order up at RK for $220:
http://www.robotkingdom.com/services/eshop/main.php?action=details&CatType&II=TFTRMP10&lang=us&CatID

Titled: MP 10 Convoy ver. 2.0

Pre-order, release on September 2011.

MP-10 comes with a human figure that can fit into the driver sit.
It is a new mold, smaller figure/trailer than MP-04, but more Japan animate look!

So its a new mould that is smaller scale! If this is mould is decent I might start collecting mps... :p

[kup]

Make it Ginrai! (would make more sense for the Japanese market too since Powermaster Prime never existed in Japan)

A Powermaster/Ginrai mold would be the best scenario but I doubt it would happen.


Pre-order up at RK for $220:
http://www.robotkingdom.com/services/eshop/main.php?action=details&CatType&II=TFTRMP10&lang=us&CatID

Titled: MP 10 Convoy ver. 2.0

Pre-order, release on September 2011.

MP-10 comes with a human figure that can fit into the driver sit.
It is a new mold, smaller figure/trailer than MP-04, but more Japan animate look!

So its a new mould that is smaller scale! If this is mould is decent I might start collecting mps... :p

A human? Maybe this is a movie mold unless he comes with a Spike/Sparkplug figure but still at $220 it doesn't sound as if it will be worth it. Rodimus was pretty expensive but he was so flawed that it was easy for someone to feel short changed due to it being so expensive for what you got.

[Ode to a Grasshopper]

I'm so getting it.
I don't have an MP Prime yet and prefer the Faith Leader size for scale reasons, but could never quite bring myself to buy what is really just a downsized copy.
MP-10 comes with a human figure that can fit into the driver sit.
It is a new mold, smaller figure/trailer than MP-04, but more Japan animate look!Perhaps TakTom could be extending the HA gimmick like it's been doing with the c-clip weapons. Does anyone have a Faith Leader and a Human Alliance figure?
If so, can we haz pics of their vehicle modes and FL with the HA human for scale comparison please?:)

[ITZTRU]

disappointed. oh well. save me some money.

[SharkyMcShark]

If it's a MP01 Prime size and budget Movie Prime I'd probably shell out for it

[Lord_Zed]

Without pics it's all speculation, It'll have to be something to make me buy another Prime, however it is possible.

Aside from the head I don't see how you can get Prime looking more like the cartoon than he already does.

[Tober]

Aside from the head I don't see how you can get Prime looking more like the cartoon than he already does.

I think it was stated that they're fixing his cab mode and including Roller. :)

-----

The beauty of MP-1 was that it was roughly in scale with the Binaltech line. So if this new one is smaller it won't fit with HA either, but might work with Grimlock and the Seekers.

[jaydisc]

Rightfully so. Cab mode is abysmal, especially for a masterpiece. The latest RtS Legend has a better cab mode.

[UltraMagnus]

I have been advised from contacts the human figure for MP-10 is Spike
Price tag = $249.99
Rumor = Fortress Maximus....

only possible explanation at that cost.

[kaiden]

I have been advised from contacts the human figure for MP-10 is Spike
Price tag = $249.99
Rumor = Fortress Maximus....

only possible explanation at that cost.

from reading around, it still seems to be Optimus Prime - human alliance style with proper seating for the human figure.

But fortress maximus sounds better.

[gdmetro]

Judging from what RK have posted... it is definitely a new convoy/prime mould. It has a figure- could be spike for the drivers seat- and is resized into a smaller cab/trailer. It is a new mould- whether that be a retooling of the old mpor a completely new design ( I think the latter).

Definitely not Fortress Maximus- although that would be sweet. Consider the cost of MP Rodimus was already about $200...

[kup]

As unlikely as it is likely to be, Fort Max would be a must while yet another Prime is just meh. However I believe the rumor that the human may be Spike in his regular cartoon persona even if he is not a Headmaster.

[Tober]

I have been advised from contacts the human figure for MP-10 is Spike
Price tag = $249.99
Rumor = Fortress Maximus....

only possible explanation at that cost.

RRP for MP-4 was ¥18000, and that was 5 years ago. Add inflation and ¥23100 is roughly consistent.

[GoktimusPrime]

If it is Optimus Prime Powermaster, then couldn't the "human" figure be Hi-Q? (or human Ginrai)

Although I would love to see HasTak release proper action figures for Transformer humans like Spike, Sparkplug - and yes, even Daniel. Whether it be in 10cm scale (thus "compatible" with GI Joe ARAH, Star Wars etc.) or 30cm scale (that way we can play dress up dollsaction figures ;))

[ITZTRU]

Rightfully so. Cab mode is abysmal, especially for a masterpiece. The latest RtS Legend has a better cab mode.

Really? Is that the general consensus? Why? What's wrong with it?

[GoktimusPrime]

Rodimus was pretty expensive but he was so flawed that it was easy for someone to feel short changed due to it being so expensive for what you got.

Yeah, I saw MP Rodimus in 2 or 3 collectible stores the other day. Man that was an easy pass. I actually had a harder time deliberating when it was up for pre-order, but having seen it IRL (albeit only MISB) ... wasn't compelled to get it.

[optimus1]

Another Optimus Prime??
I'd love for this to be a Powermaster Prime or even God Ginrai (with Godbomber) :D
Even better if it were somehow a proper Ultra Magnus.

I'm still satisfied with the original MP 1.0/20th Anniversary Prime, he is still my favourite figure and what got me officially hooked onto Transformers again :cool:

[Tober]

Really? Is that the general consensus? Why? What's wrong with it?

The front panels not lining up is the main issue. The gas canisters are way too small. Wheels are too small. If you're going for anime accuracy then the headlights should be square, not round. Side windows don't have glass and don't open or even line up properly... In short, the truck mode was sacrificed for the more accurate bot mode.

Here are some comparison pics. It is neither accurate to the real life Freightliner FL86 Cab it was based off origionaly or the art used for the cartoon.

http://i273.photobucket.com/albums/jj230/AUST_Tober/op_2.jpg

[1orion2many]

I still like MP-01,04. I'm not overly impressed of having another Prime even if they do improve the original. I love the MP line but I'll be hard pressed to justify spending the amount of money they are asking for just to myself and if I can't convince myself then I have no hope of swaying my wife on me purchasing this item:o:D

[valkyrie_76]

.........no hope of swaying my wife on me purchasing this item:o:D

Has not stopped you before :D:D:D

[1orion2many]

Has not stopped you before :D:D:D

She is starting to recognise new items I sneak in:(:D

[jaydisc]

Really? Is that the general consensus? Why? What's wrong with it?

I actually always felt I was in the minority with that opinion. But yeah, #1 is the fact the front facia of the cab is not flat. The front facia of G1 Prime is flat. How could this be so badly done with what is an alleged masterpiece? To me, #1 is sooo bad, I don't even know what #2 is.

[Jay-Tron]

While I'm not too impressed by the idea of another Prime I'm still interested in how this ones gonna turn out. If they make it right and it looks awesome then I may be compelled to get it. So for now I'll wait for some pics to show up.

[ITZTRU]

I actually always felt I was in the minority with that opinion. But yeah, #1 is the fact the front facia of the cab is not flat. The front facia of G1 Prime is flat. How could this be so badly done with what is an alleged masterpiece? To me, #1 is sooo bad, I don't even know what #2 is.

I think...that...I actually hate you now. I don't think it ever really bothered me until now. And to be honest, I don't think I ever really noticed it, either. And now I just keep looking at my "masterpiece" Prime and think. Holy sh*t. Jaydisc is right. Sad times :(

[kup]

I noticed the cab flaws on MP1 early on but frankly it doesn't bother me one bit. Even if they do release another '84' Prime with a proper cab shape, it still doesn't convince me.

[ITZTRU]

I noticed the cab flaws on MP1 early on but frankly it doesn't bother me one bit. Even if they do release another '84' Prime with a proper cab shape, it still doesn't convince me.

Convince you to buy another Prime mold u mean? (Assuming MP-10 is infact another Prime?)

[jaydisc]

I think...that...I actually hate you now. I don't think it ever really bothered me until now. And to be honest, I don't think I ever really noticed it, either. And now I just keep looking at my "masterpiece" Prime and think. Holy sh*t. Jaydisc is right. Sad times :(

Ha ha. My apologies and condolences.

My Hong Kong official supplier order form clearly states:

"MP-10 Convoy Ver.2.0 - RRP 22,000 JPY - SEPT 2011"

So, I'm now 100% convinced that it is indeed Convoy.

[optimus1]

My Hong Kong official supplier order form clearly states:

"MP-10 Convoy Ver.2.0 - RRP 22,000 JPY - SEPT 2011"

So, I'm now 100% convinced that it is indeed Convoy.

:(

Hopefully this new version justifies its inflated price.
Still distant hope for a Powermaster Prime :rolleyes:

[Ode to a Grasshopper]

:(

Hopefully this new version justifies its inflated price.
Still distant hope for a Powermaster Prime :rolleyes:"Dear Santa FansProject, for Christmas this year I would like..."

[canofwhoopass_87]

If this smaller re-design somehow paves the way for a true G1 armoured Ultra Magnus then I'm all for it. Whether or not that happens though...:rolleyes:

I wouldn't be too impressed if MP10 is significantly smaller than the original MP Prime...wouldn't want the skinny legged Megs towering over the little guy

[Darthprimus]

Not sure if its been mentioned but the latest rk newsletter says it comes with a human driver.

[Vector Prime]

Not sure if its been mentioned but the latest rk newsletter says it comes with a human driver.

Mentioned in post #68 (http://www.otca.com.au/boards/showthread.php?p=236171#post236171) but it's understandable that some people may have missed reading it. :)

[kup]

Convince you to buy another Prime mold u mean? (Assuming MP-10 is infact another Prime?)

That's what I mean

[kup]

"Dear Santa FansProject, for Christmas this year I would like..."

If FansProject announces Powermaster armor for this mold that would most likely convince me to buy one ;)

Unfortunately this still doesn't convince me that yet another '84' Prime is such a hot idea. Even with the hopeful armor, it would still be lame and relying on a 3rd party product to make it something special.

[SkyWarp91]

Any hints on MP Rodimus' packaging?

[yoshi594]

cheapest place to pre-order? i'm thinkin of robotkingdom once I get more moolah. Anyone know of cheaper (inc. postage) places to get the new masterpiece?

[KaRNiV8L PRiME]

SOURCE (http://www.fullmetalhero.com/content.php?395-More-Information-on-Transformers-Masterpiece-MP-10-Convoy)

More details reach us via the wholesale route confirming some more details on the new MP-10 Convoy figure due this September

1) Confirmed G1 Convoy - not powermaster - comes with cab and trailer
2) Much more detail along the lines of THS-02 Convoy - many accessories
3) Approx one third shorter than the existing MP-01 Convoy figure

[ITZTRU]

Freakin' lame. I don't know if I should be happy about saving my money or upset that I don't get to spend on the latest masterpiece who I thought was going to be ANYONE ELSE BUT OPTIMUS-FREAKING-PRIME!!!!!!

[UltraMarginal]

Freakin' lame. I don't know if I should be happy about saving my money or upset that I don't get to spend on the latest masterpiece who I thought was going to be ANYONE ELSE BUT OPTIMUS-FREAKING-PRIME!!!!!!

I've got to agree here, another prime is just a waste of plastic. they should be moving the masterpiece line forwards, a new character, Galvatron, a quality Ironhide, a fort max or other larger character would be great, even someone like Kup, Arcee or more dinobots would be better than another prime.

[ITZTRU]

I was SO convinced it was going to be Galvatron. SO SO convinced! How could it NOT be after releasing Hot Rod/Rodimus? I don't care how crap the mold was, Rodimus was a good move. I'm not the biggest fan of rodimus as a character but I was ALL over the MP toy.

Weaksauce.

[SkyWarp91]

I've got to agree here, another prime is just a waste of plastic. they should be moving the masterpiece line forwards, a new character, Galvatron, a quality Ironhide, a fort max or other larger character would be great, even someone like Kup, Arcee or more dinobots would be better than another prime.


Freakin' lame. I don't know if I should be happy about saving my money or upset that I don't get to spend on the latest masterpiece who I thought was going to be ANYONE ELSE BUT OPTIMUS-FREAKING-PRIME!!!!!!

Yeah, I just got the MP-04 and then found out about this - not only is it a waste of plastic but metal too. Though TakTom probably did this to coincide with the release of DOTM and gives new fans the opputunity to buy a G1 Prime. Though I am dissapointed that we don't have a MP Galvatron yet, or a proper G1 Ultra Magnus

[jaydisc]

The existing Prime & Megs don't really fit in with the other MPs. I wouldn't be surprised if TT feels that there is a lot of future in the MP line, and thus needs to correct the first two molds to be proper frontmen for the line.

I still can't fathom what alt mode they'd give a Masterpiece Galvatron or Soundwave. It's not that I wouldn't want one; I just understand the challenge.

[ITZTRU]

I still can't fathom what alt mode they'd give a Masterpiece Galvatron or Soundwave. It's not that I wouldn't want one; I just understand the challenge.


Why wouldn't they be anything other than a classic tape deck or futuristic canon respectively? The MP line (aside from the movieverse figures) has so far followed the actual G1 cartoon trend of bot and alt modes -- only more detailed and accurate (as much as possible)

I don't see why they would consider giving soundwave and galvatron different alt modes. And I sure as hell hope they dont either! Thats what classics, generations, united etc line is for!

[Tetsuwan Convoy]

I still can't fathom what alt mode they'd give a Masterpiece Galvatron or Soundwave. It's not that I wouldn't want one; I just understand the challenge.

Maybe a cannon or cassette player? They gave Grimlock a robot Dinosaur mode.

I was under the impression that the MP line was about bringing the characters to life with a pretty spot on toy. I doubt they would go messing with them that much (Starscream Abomnination aside)

[Ode to a Grasshopper]

The more I hear about this the more I wants it. Bring on next week's pics!

[ITZTRU]

there are pics next week?

[KaRNiV8L PRiME]

there are pics next week?

Yup

SOURCE (http://www.tfw2005.com/transformers-news/japanese-transformers-40/masterpiece-convoy-version-2-to-be-unveiled-soon-172059/)

[ITZTRU]

thanks for that.

I am curious, I must admit. But I still don't know about the price tag!

I mean, ok:

- Driver
- Roller
- More detailed and accurate cab
- More detailed and accurate trailer
- A few more accessories so play around with

what the hell else could they include to warrant the price tag? coz that to me, sure as hell isnt enough.

it'd have to be something unbelievable for me to even consider buying this "new" mold of a character that has been re-issued and re-deco'd countless times in the same line in just a span of a couple of years.

[ITZTRU]

...or maybe I just really wanted a Galvatron :(

[Tetsuwan Convoy]

...or maybe I just really wanted a Galvatron :(

You're not the only one...

[Ode to a Grasshopper]

thanks for that.

I am curious, I must admit. But I still don't know about the price tag!

I mean, ok:

- Driver
- Roller
- More detailed and accurate cab
- More detailed and accurate trailer
- A few more accessories so play around with

what the hell else could they include to warrant the price tag? coz that to me, sure as hell isnt enough.

it'd have to be something unbelievable for me to even consider buying this "new" mold of a character that has been re-issued and re-deco'd countless times in the same line in just a span of a couple of years.The main reason I'm looking forward to it is 'cos I don't have any MP Primes or Faith Leader, and this sounds like an improvement on both - and 'cos it'll work better with more normal sized TFs which make up the bulk of the Odieverse. The fact I'm likely to be teaching English in Japan when it comes out helps too.;)
The thing is, it's likely aimed at the Japanese collector market where Convoys apparently always sell well, and presumably to match the scale of the more recent MPs better. The fact that so many Western fans aren't interested is a bonus IMO, it means it should be easier to get one at sale prices.
If I had an MP Prime or Faith Leader already I'd probably be skipping on it too.
You're not the only one...Yeah, a MP Galvatron would be very cool.

[Tober]

MP-1 and Binaltech are what got me back into Transformers back in 2003. MP Convoy was a great achievement for Takara's designers and has been their flagship design for Transformers for alomst a decade. If they are creating a better flagship, then I'm looking forward to it. :)

[optimus1]

Even though it is a G1 Prime, we still shouldn't knock it until we see it.

Hopefully this version is more articulated, cartoon accurate (even though the existing one is very close) and still very robust and sturdy.

Out of the MP molds, only Prime and Grimlock seem to be able to withstand repeated transformations without fear of something snapping :p

[Lord_Zed]

Yeah I'd also like to see a Galvatron toy, but oh well...


The existing Prime & Megs don't really fit in with the other MPs. I wouldn't be surprised if TT feels that there is a lot of future in the MP line, and thus needs to correct the first two molds to be proper frontmen for the line.

I still can't fathom what alt mode they'd give a Masterpiece Galvatron or Soundwave. It's not that I wouldn't want one; I just understand the challenge.

I think its more a case there are two scales in the MP line, one for Leaders like Optimus, Megs and Rodimus, and then another for everybody else. One might even argue that the smaller MP's Grimlock and the seekers are more detailed than there more cartoony but simpler larger counterparts too, so yeah perhaps this Prime belongs to the smaller sub group of MP's


MP-1 and Binaltech are what got me back into Transformers back in 2003. MP Convoy was a great achievement for Takara's designers and has been their flagship design for Transformers for alomst a decade. If they are creating a better flagship, then I'm looking forward to it. :)

Good point, I'm reserving judgement till I see the toy, speaking of Binaltechs I wonder how this guy will scale with Alternities and Deluxes. MP 1 Prime scaled well with the Binaltechs in Truck mode, untill your transfromed him, I know Prime is big, but he's not that big.

This Prime could go either way, not long ago Rodimus was tipped to be the best MP ever, and look what happned, perhaps this will be the oppisite.

Still I've only bought one MP Prime (MP1), If I had bought MP1 and the MP rerelease with Trailer, reapints, and that unmentionable knock off one then I'd be less than thrilled even if the new Prime is good.

[valkyrie_76]

Ill be interested in seeing the final product. I already have MP-01 and MP-04 but if this improves on both molds, then I might get it, maybe when Im over there.

[jaydisc]

I think a large, masterpiece scaled cassette-deck, or an alt mode consisting of a bot-on-his-hands-and-knees-with-a-cannon-coming-out-of-his-head would suck. I'm also inclined to think TakaraTomy agrees with me, or at least don't want to concede on those modes just yet. If I want alt-mode nostalgia, I'll buy G1. If I'm spending over $100 on what is supposed to be an incredibly articulated, detailed and complex transforming, I want an alt mode that consists of more than a box, as well as one that has the slightest bit of relevance in today's world.

I don't see Grimlock as the same, as the Grimlock character's premise was that he represented an out-of-date alt mode.

As said, I do think that Hasbro and TakaraTomy agree with this somewhat, which is why recent Soundwaves have been cars or trucks, Galvatrons have been tanks or jets, and Scourge is no longer a flying boat, and that doesn't just apply to Classics.

[Hursticon]

I think a large, masterpiece scaled cassette-deck, or an alt mode consisting of a bot-on-his-hands-and-knees-with-a-cannon-coming-out-of-his-head would suck. I'm also inclined to think TakaraTomy agrees with me, or at least don't want to concede on those modes just yet. If I want alt-mode nostalgia, I'll buy G1. If I'm spending over $100 on what is supposed to be an incredibly articulated, detailed and complex transforming, I want an alt mode that consists of more than a box, as well as one that has the slightest bit of relevance in today's world.

I don't see Grimlock as the same, as the Grimlock character's premise was that he represented an out-of-date alt mode.

As said, I do think that Hasbro and TakaraTomy agree with this somewhat, which is why recent Soundwaves have been cars or trucks, Galvatrons have been tanks or jets, and Scourge is no longer a flying boat, and that doesn't just apply to Classics.

Whereas I'm of the opinion that a large scale Futuristic Artillery Cannon or a Retro-Look Cassette Deck/Boombox would be awesome. I too think that TakaraTomy agrees with me, or just haven't found an effective budget for these modes yet. If I want alt mode nostalgia, I'll buy G1, but then as history has shown us, I'll also buy something brand new too. As I am expected to pay over $100 for decent quality 20+ year old un-articulated bricks, being asked to pay over $100 for a super detailed, engineered and highly articulated brick that has relevance to yester-year sounds far more appealing to me.

Grimlock, whilst based on an extinct animal, is a fan favourite character and leads me to my next point.

As I've alluded to, Hasbro and TakaraTomy agree with what is going to sell to which specific demographic - this is the reason why on mass consumed lines aimed at children, recent Soundwaves have been cars or trucks, Galvatrons have been tanks or jets, and Scourge is no longer a flying boat, and these approaches don't just apply to Classicsverse figures but all lines aimed at children.

The Masterpiece line is not designed for a mass child based consumer demographic, but rather an Adult collector based market and is hence not subject to the same alt mode rules that apply to other lines because at the end of the day no parent is going to purchase a $100+ toy that is far too complicated for their child - The box may say for ages 5 and up, but IMO that is purely to get major retailers to stock these items in the western markets.
(How many of us have ever heard of a parent buying a Masterpiece figure for their child, aged under 10? :confused:)

The Masterpiece line's design aspect has been a modern engineered transformation in order to achieve a more 80s TV Show Model accurate bot mode, since it's inception and this shows no sign of changing.
Personally, a Masterpiece Soundwave, box or not, would be Far Superior to yet another red and blue truck. ;)

[jaydisc]

That's a very reasoned response. Cheers. And I do agree with this:

"I'm of the opinion that a large scale Futuristic Artillery Cannon or a Retro-Look Cassette Deck/Boombox would be awesome"

And that's exactly what I'm talking about. I think it must be a digression from the original alt-modes. Homaging too? Yes, also a must.

[UltraMarginal]

The Masterpiece line is not designed for a mass child based consumer demographic, but rather an Adult collector based market and is hence not subject to the same alt mode rules that apply to other lines because at the end of the day no parent is going purchase a $100+ toy that is far too complicated for their child - The box may say for ages 5 and up, but IMO that is purely to get major retailers to stock these items in the western markets.
(How many of us have ever heard of a parent buying a Masterpiece figure for their child, aged under 10? :confused:)



My Sister in Law's kids toy box had an Alternators Hound and Smokescreen in them when the kids were mabe 3 and 5 or about those ages. I was amazed at how easy it was to "re-assemble" and transform them into their respective alt modes. I don't know what they were thinking buying Alternators for kids that young.

I have enjoyed the entire masterpiece line, I am pretty sure there is little need for another prime. apart from that though, I think a Galvatron or Soundwave would be cool but I also think there would be other characters well served by the line, it's just becoming harder to me to say which they would be. so many characters are already getting a great treatment either through the Alternators/Binaltech line or just normal classics/rts etc.

I will be getting Rodimus, not so sure about MP10 if it is another OP. I almost view the Masterpiece line as a proof of concept line.
Like a concept car at a motorshow, except they make more than one. the tech in these is gradually filtering down into the cheaper lines of transformers.

Engineering that pushes the envelope sometimes pushes a little too hard, and perhaps they shoudl scale back a little on the pushing, MP01 was more conservative, it's lower complexity though made it much more accessible. MP05 is much more complex, pushing the envelope to the edge and it brilliant. Not having an MP09 yet, it looks to me from a distance that perhps this time they pushed a little hard and the envelope has a couple tears in it.

Things can be tested, and appear fine, but sometimes it's the Faster production lower tolerance product that shows a flaw or two that don't turn up in the initial low rate production model.

[Hereticpoo]

I think a large, masterpiece scaled cassette-deck, or an alt mode consisting of a bot-on-his-hands-and-knees-with-a-cannon-coming-out-of-his-head would suck. I'm also inclined to think TakaraTomy agrees with me, or at least don't want to concede on those modes just yet. If I want alt-mode nostalgia, I'll buy G1. If I'm spending over $100 on what is supposed to be an incredibly articulated, detailed and complex transforming, I want an alt mode that consists of more than a box, as well as one that has the slightest bit of relevance in today's world.

I don't see Grimlock as the same, as the Grimlock character's premise was that he represented an out-of-date alt mode.

As said, I do think that Hasbro and TakaraTomy agree with this somewhat, which is why recent Soundwaves have been cars or trucks, Galvatrons have been tanks or jets, and Scourge is no longer a flying boat, and that doesn't just apply to Classics.

I Agree with you on those points man. But as simple as those characters are I still would have been more excited about those than another OPTIMISE PROFIT PRIME. :)

Hell, Masterpiece Autobot Gears would've been more exciting! :D

[ITZTRU]

"I'm of the opinion that a large scale Futuristic Artillery Cannon or a Retro-Look Cassette Deck/Boombox would be awesome"

And that's exactly what I'm talking about. I think it must be a digression from the original alt-modes. Homaging too? Yes, also a must.

but every other masterpiece's alt mode has been a more detailed and more accurate G1 looking representation. If they start digressing from original alt modes then the original concept of the masterpiece line will change too. To me that would suck coz then we would never get a detailed Soundwave just coz it's not complex enough in terms of transformation. That would suck for me :( I'd love MP soundwave.

[jaydisc]

This is the exactly the conundrum I base my theory on. Does TT follow the current pattern and make a blocky cassette deck Masterpiece Soundwave, or will they choose a character with an alt mode with more presentable, Masterpiece value?

[ITZTRU]

Point taken. Well. They'd better come up with at least another decent decepticon soon! A new decepticon mold is due! And if this MP10 truly is another convoy, they BETTER NOT make MP11 a downsized version of Megatron! It's hard enough getting G1 representations of megatron into the country enough as it is!

Now that I think about it...that's probably whats gonna happen, if infact TT is trying to make all the MP's similar size to each other.

Lame.

[jaydisc]

Yeah, I'd say MP10 all but confirms that MP11 is Megatron.

[GoktimusPrime]

Point taken. Well. They'd better come up with at least another decent decepticon soon! A new decepticon mold is due! And if this MP10 truly is another convoy, they BETTER NOT make MP11 a downsized version of Megatron! It's hard enough getting G1 representations of megatron into the country enough as it is!

Now that I think about it...that's probably whats gonna happen, if infact TT is trying to make all the MP's similar size to each other.

Lame.

Yeah but it's not a legal issue in Japan which is TOMY's primary market. But I agree -- a new Decepticon mould is indeed long overdue.

I'd be all over a MP Shockwave. :)

[ITZTRU]

Yeah but it's not a legal issue in Japan which is TOMY's primary market. But I agree -- a new Decepticon mould is indeed long overdue.

I'd be all over a MP Shockwave. :)

Yeah I realize this. But you can't help but feel sorry us fans in australia! Well at least I can't. Or maybe I'm just thinking of myself? :P

Either way. A hell yes to shockwave. Oh man...can't imagine!

[GoktimusPrime]

I do feel more sorry for you guys in Victoria where gun Transformers are currently outlawed. At least in NSW they're legal if you have a permit. Though I envy people in WA where it's completely unrestricted!

Having said that, I came across this site earlier this evening:
http://www.blackknightsteel.com/victoria-sword-law/
It's a site for sword and dagger collectors in Victoria. Membership in their club allows you to legally purchase and possess a sword or dagger in VIC, but the site also interestingly says "Alternatively you can apply for a prohibited weapons permit from police licensing."

It may be worth contacting the Victorian Police Weapons Division and ask them if acquiring such a permit would allow you to purchase and possess gun Transformers. You may need to explicitly state that a gun Transformer is NOT an operable weapon and can NEVER be modified to become an operable weapon (unlike say a blunt collectable sword which can be modified to be an operable weapon by sharpening it!). If you can establish a precedent or legal process for Victorians to legally own gun Transformers, then you'd be potentially helping all your fellow Victorian fans (and possibly other fans in other regions of Australia where gunformers remain outlawed)!

Email: licensingservices@police.vic.gov.au
Phone: 03 9247 3142

[jaydisc]

PICS! (http://www.fullmetalhero.com/content.php?450-Transformers-MP-10-Masterpiece-Convoy-First-Pictures)

Looks great! Although not too different, but they fixed my biggest complaint!

[KaRNiV8L PRiME]

me like!!!!!!!!!!!!

[Hursticon]

Pics mirrored for posterity:


http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/mp10-1_1305025211.jpg

http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/mp-10-2_1305025211.jpg

http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/mp10-3_1305025211.jpg

http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/mp10-4_1305025211.jpg


IMO, very underwhelming. :rolleyes:

[LordCyrusOmega]

:O I want it! Really wish I didn't have MP4 now. Oh well, my display idea still works.

[yoshi594]

looks awesome! any group orders going to happen for this xD?

[kup]

It's virtually the same as MP1. Design wise it seems very close to the the original with the abs grill is still being fake just more stylized.

EASY Pass for me. Disappointing.

[kaiden]

it looks great but i hate the transforming gun.

[Tallestblue]

I kinda want it. but i don't $250 want it.


We can has Hasbro Version pleez?

[SkyWarp91]

I only just bought MP-04 the other week so I'm pretty much satisfied with that. It does seem like a cheap move on Hasbro/TakTom's part just to re-release an updated mold...

[Lord_Zed]

I'm still making up my mind, the truck mode is definitely better than the original. The robot mode seems a bit more detailed too. Transparent parts on the groin plates are a nice touch. I may get it, My MP 1 convoy only has a cardboard trailer, so the trailer in this set could swing it.

[SharkyMcShark]

Can't even begin to describe how little this interests me.

[kristofferrer]

not exactly what i was expecting. what was the point of making this? it doesnt really expand on the series. I'm guessing they established what masterpiece sizing is (i.e. MP seeker size) so their shrinking everything down? smaller figure, even smaller human character, but price remains?

the detail on him is a bit humdee... where are those pistons on his arms and feet? "twas proof that prime is a plaussible being".

Maybe they're rebooting the series. If that's the case, I suppose we could hope for a better looking MP05?



I think collectors willl collect it but i'm not sure if it will satisfy their thirst.

http://www.thetelecomblog.com/wp-content/uploads/2010/12/new-hat-stacy.gif

[Jaisun]

http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/mp-10-2_1305025211.jpg

Lol, "Convoy Gun" is housed within backside XD

*end childish snigger*

Mmkay, this is both pleasing and annoying to me. I have MP-04, but from Target, so it has a few QA issues. I also have MP-02, Ha$bro SS, SW and Grimlock. The scale difference has always bothered me, like most other collectors, but I accepted it. Now we are offered a smaller, same-scaled, slightly more detailed re-release... for the same price? REALLY?! When I buy a deluxe at $25 and then later find out they are releasing a redeco that I prefer, I can handle that, but this is 10x the price of that, so it's quite a slap in the face.

On the upside though, those who missed MP-01/MP-04 will possibly see a few come available from people selling them off to get MP-10... Maybe...

If this were in $100-150 territory, I would be much more tempted, but it sooooo isn't... =o(

[gdmetro]

Ah.. was totally busy this week and just saw these pics now.

To be honest, he looks great, better than the original MP prime, merely because of the small changes. The truck cab looks much better for one.
The bot mode looks less stocky and more proportioned. The extra detailing on the grill and nicer cartoon head looks great. Add to all that the proper trailer and you have a winner.

It is tempting for me especially since besides MP grimlock, I don't own any other MPs- and this prime looks so sweet. Having said that, $250 steep. Ill wait to see reviews...

Hopefully this means an ultra magnus (with trailer armour) is in the works. Id buy that.

[Tober]

Realistically, it's largely what I was expecting - a refined MP-1. The cab is much better realised this time too. Pity the door windows are red tho, about the only thing that really bugs me.

Currently DotM doesn't interest me at all. MP-10 does. :p

I look forward to seeing how the transform gimmick works. The chest transformation for MP-1 was always clumsy.

At least his gun is the right color now... Not sure I like Roller being gray, cartoon accuracy aside.

[1AZRAEL1]

*big underwhelming sigh*

Not as good as I was expecting. If the price tag is smaller than what we are anticipating, then maybe I will get it. If not, then I'm not fussed if I don't get this. Does look like there is some improvement, but not enough for me.

[Shirokaze]

Well, I do like this figure. Glad I haven't bought a MP Prime since MP-01 v1.

Now the question is, do we wait for MP-10 v2 to come out with all the problems fixed? :p

[kaiden]

Well, I do like this figure. Glad I haven't bought a MP Prime since MP-01 v1.

Now the question is, do we wait for MP-10 v2 to come out with all the problems fixed? :p

after rodimus, yes.

[jaydisc]

Not just that, but he'll be available as MP-13 (Magnus), MP-16 (w/Blue Roller), and MP-18 (Black version), MP-19 (Dead version), and MP-20L (Last version).

But wait till you see the new, even better MP-21 Convoy ;)

[Lord_Zed]

Not just that, but he'll be available as MP-13 (Magnus), MP-16 (w/Blue Roller), and MP-18 (Black version), MP-19 (Dead version), and MP-20L (Last version).

But wait till you see the new, even better MP-21 Convoy ;)

So true, but I never understand why people react so strongly, or say this a slap in the face, or a huge surprise, it's what Hasbro and co do, they've done it before and they'll do it again and again. Remake the most popular characters over and over again until they are no longer profitable. It would hardly surprise me if they even remade some classics moulds in the near future.

[ITZTRU]

Actually kinda glad I don't have to worry about shelling out more money on this...

[kup]

So true, but I never understand why people react so strongly, or say this a slap in the face, or a huge surprise, it's what Hasbro and co do, they've done it before and they'll do it again and again. Remake the most popular characters over and over again until they are no longer profitable. It would hardly surprise me if they even remade some classics moulds in the near future.

I don't think it's a surprise but I do think it is slap in the face of sorts...one that you see coming from a mile away but you still feel it like a sucker punch. ;)

[Tober]

But wait till you see the new, even better MP-21 Convoy ;)

Is that the one that will transform by itself as well as featuring the gimmick where it transforms all previous Convoy releases for you? Can't wait!

Release date will probably coincide with the Live Action Movie Anthology Collection 10th Anniversary set.

[kaiden]

The Final Final Version of Optimus will be the G1 movie version with real battle damage so you can simulate the epic battle vs Megatron. And afterwards, he changes colour to the dead version.

actually with all these versions, i'd like to see a Hulkbuster version like iron man.

[Verno]

http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/mp-10-2_1305025211.jpg

Ah, gentleman. You seem to be missing the important information.

"Convoy can transform by one touch"

...

He's a bloody flipchanger!

[kup]

Ah, gentleman. You seem to be missing the important information.

"Convoy can transform by one touch"

...

He's a bloody flipchanger!

I think that is Engrish in action.

[Quickstrike]

It's referring to the gun. I guess it transforms when you stick it in Prime's hand.

[LordCyrusOmega]

Not to mention that he keeps his rifle in his 'backside'. Thats just weird

[SpeedBreaker]

So he's the same height as Masterpiece Rodimus but how tall is that exactly? I'd only be interested in geting this new Optimus Prime if it was reasonably in scale with the Classics/Generations Autobot cars.

[Ode to a Grasshopper]

Hmm...same size as MP Roddy hey? This just went from a 'must-have' to a 'wait for reviews and see'. It looks pretty cool but it's still kinda big for my tastes - I was hoping for something Faith Leader sized so it would sorta work with Classics etc, but MP Roddy is kinda tall. The head looks much improved, the HA-capable command bay is a nice touch and the trukk mode is far better, but the extra-long limbs aren't doing it for me and it needs some paint apps on the side windows.

Also, no wrist communicators or mini-Megatron? I hope he can use the Legends Megs or something.

[kaiden]

the thing that i want is the human spike to be in scale with the DOTM HA figures. I'd love to have Sargent chaos driving optimus

[canofwhoopass_87]

Not to mention that he keeps his rifle in his 'backside'. Thats just weird

..not if you've seen the original 1986 movie! I think it's awesome they added in that feature.

check 0:38

http://www.youtube.com/watch?v=bBUAG6Gy-to

I'm really tempted to pick one up, but at $250US (even with the AUD being powerhouse atm) I just can't justify spending that much. $150 would be a good price :p

[LordCyrusOmega]

He keeps his rifle in his back, fair enough, but it says his 'backside'. It just doesn't sound right

[canofwhoopass_87]

He keeps his rifle in his back, fair enough, but it says his 'backside'. It just doesn't sound right

The photo shows the weapon is stored in his back. In regards to the term "backside" being used, I do believe Kup was spot on when he stated


I think that is Engrish in action.

[Hursticon]

I think that is Engrish in action.


The photo shows the weapon is stored in his back. In regards to the term "backside" being used, I do believe Kup was spot on when he stated

Exactly what I was thinking, I reckon you're both dead-right on that one. :cool:
Mind you, it doesn't bother me too much seems I'm not ponying-up the dough on something that isn't worth it. ;)

[optimus1]

I like the look of this Prime, in better proportions.
But how much of it is Die-cast/Plastic?

But I still love my MP Prime - Hasbro + Takara versions
I don't mind having a Prime bigger than the other Masterpieces.

[LordCyrusOmega]

My comment was more about the wording then the actual placement.

[GoktimusPrime]

Nothing wrong with having guns in your backside (http://3.bp.blogspot.com/_n8CKTO3MuQg/Ss4Ep5_DyHI/AAAAAAAAAdQ/mpc243WdE-E/s200/power_hips.jpg) ;)

[Doubledealer]

*looks at toy* Hey, not bad!
*looks at price* lolwut

[LordCyrusOmega]

Nothing wrong with having guns in your backside (http://3.bp.blogspot.com/_n8CKTO3MuQg/Ss4Ep5_DyHI/AAAAAAAAAdQ/mpc243WdE-E/s200/power_hips.jpg) ;)

Having one in your butt and storing one there are 2 different things. This was an attempt at humour on my behalf that has failed miserably. And to make it worse I don't recall what triggered me to say it in the first place. If I could it would make sense

[Lint]

Love the new front cab mode. Its fantastic! That alone could be merit enough for buying this.

The thing that is really going to annoy me now is those chunky ass legs though. Looks so wrong in robot AND vehicle mode.

Also foldable gun was completely unnecessary

[Eazy D]

My thoughts on MP-10

The truck cab certainly looks better BUT

1. I want to get a good side view and rear angle view to make sure his groin/waist section cant be seen
2.The lack of side windows is annoying for something thats supposed to be "superior"

Overall the figure looks very nice but it looks like it will transform quite similarly to MP-01. Given that the trailer is still quite basic it feels like a helluva lot of money for something that I already have.

The foldable gun doesn't bother me. From the dreamwave comics I always thought prime stored his gun in his back so I think its quite a cool feature.

I still wish they had chosen another character for MP-10. Given the price tag and the QC issues with MP Rodimus I won't be pre-ordering this. I'll hold out for reviews of the first release. I have a feeling i'll end up getting it in the end coz it is a masterpiece but what I'm really holding out for is the faint hope that they may try to make a Ultra Magnus power armour as a future MP.

[Magnus]

I like the new cab - definitely an improvement over MP-1, and the ability to stow his gun and the mini-Spike are nice touches.

However, I already have 20th Anniversary Prime, so right now I don't feel a particularly strong desire to buy this one. I, too, will be holding out for an MP Ultra Magnus with trailer/armour.

[Adzma]

:eek:I'm actually at a loss for words at how disappointing this whole thing has turned out to be. Eeeeasy pass right here. :rolleyes:

[KaRNiV8L PRiME]

Transformers MP10 Masterpiece Convoy Officially Revealed

source (http://www.fullmetalhero.com/t1957/)

[Hursticon]

Transformers MP10 Masterpiece Convoy Officially Revealed

source (http://www.fullmetalhero.com/t1957/)

Hell yeah!
With proportions like that it gives me hope for an MP Primal! :D
(Still don't dig the Cheese-cutter tyres :p)


http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/MP-10PrimeOfficial.jpg

[gdmetro]

He looks bloody awesome!!! Too bad at the price...I know if there is an eventual Hasbro release, the colours won't be as nice... decisions, decisions.

If rumors of the newer string of MPs are true, I may just have to start re-prioritizing my collecting and delving into MPs..

[theheretic]

How is this different from the previous convoy/optimus MP's? Sorry for my ignorance as I've only recently purchased an MP Optimus (2004 Hasbro) and no intention of opening it.

[Hursticon]

How is this different from the previous convoy/optimus MP's? Sorry for my ignorance as I've only recently purchased an MP Optimus (2004 Hasbro) and no intention of opening it.

Does this help mate?


MP-01 Prime & MP-10 Prime

http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/MP-01PrimeOfficial.jpg http://i1032.photobucket.com/albums/a409/Darkone666au/Webpics/MP-10PrimeOfficial.jpg

[Zippo]

Cheers for the picture there Hursticon
I was trying to look at my one in the display cabinet and then the picture, but it wasn't working to well.

Hrm .. looks good the new mold does. Nicer head and other small refinements
Good that we get the trailer, roller and Daniel

But the price is a killer. A real killer.

[Robzy]

Wow - I never thought they'd be able to improve on the 20th anniversary figure, but I was happily wrong... at least, judging by these pictures.

Can't wait to see more!!

[theheretic]

That does help thanks. Looks much less chunky/clunky and more refined. Very nice :-)

[Ode to a Grasshopper]

Hmmm...want.
But so much money.:(

[kurdt_the_goat]

So torn! It looks good but not better than MP-01 in every way.
The main thing holding me back though is the price.
3000Y more expensive than what MP-4 retailed for... i'm not sure that the decrease in size, any improvements & roller + spike ought to cost that much more.

[Tober]

I don't seem to have the hang-ups other people do over this - kinda strange really. :rolleyes:

Anyway, I've pre-ordered with Anime Export (http://www.anime-export.com/product/7227) for 15400 JPY (30% off - $180 AUD). I'm sure Amiami, HLJ etc will list for similar soon.

[kurdt_the_goat]

eHobby (http://www.e-hobby.co.jp/cgi-bin/omc?req=PRODUCT&code=mp_10) has a few more pics:
http://i55.tinypic.com/153pvvb.jpg
http://i55.tinypic.com/2whe5pi.jpg
http://i52.tinypic.com/117skl3.jpg

Here's a better comparison IMO:
http://i55.tinypic.com/w0nal4.jpg

[gamblor916]

He looks better no question but I'm not sure he looks $180 good.

[Hursticon]

Courtesy of TFW2005.com, a whole slew of videos (http://www.tfw2005.com/transformers-news/japanese-transformers-40/masterpiece-convoy-20-video-from-international-tokyo-toy-show-172545/) from the Tokyo Toy Fair with specific focus on the new MP-10 Prime. :cool:

[gamblor916]

Thanks for the link.
What is that green commando Prime!?

[k.wong23]

Thanks for the link.
What is that green commando Prime!?

Bape x G1 Optimus release :D

I'm gonna get one! But no pre-orders have been put up yet hmm

[5FDP]

Sure he looks good and all, but I cannot justify getting another Prime, especially for that price. The other thing that bugs me about this is how they've reduced his size. I'll be sticking with my 20th anniversary Prime; the best and still the greatest!

[gdmetro]

Arghh... the more pics/vids I see of MP-10, the more I want it. He looks damn awesome. The only issue I have from the pics, is that the gun looks a tad small.

Normally I'm not that fussed over Prime, but something about this mould really calls out to me. Too bad about the price tag...

And some mention about the designer wanting to do MP bruticus? Man...hopefully that will someday come to fruition, it would be sweet...most likely better designed and the price tag would be good compared to the 3rd party stuff..

[Robzy]

Oh my.... I can't wait!! :eek:

This looks so much better than the first MP Prime - and that's my favourite toy!!

[orionpax1]

would really like to get this but way too expensive, hopefully hasbro will do a version. The news about the designers wanting to do a combiner is great news, hopefully they pull it off but as much as i like bruticus a different combiner would be better, Technobots im looking at you.

[jaydisc]

He looks great. I'm excited.

[1AZRAEL1]

Looks cool. I will more than likely pick it up if I see it locally.

[kristofferrer]

hrmm... it just hit me that if they reboot Optimus Prime (and his variants) with MP10, they may also reboot Ultra Magnus. This mold may be prepping up for the Ultra Magnus Armor????

Ill get this one mold for sure.

[kurdt_the_goat]

It seems likely; on some of the photos of the back, there are more obvious than normal holes that could be used for attaching armour.

[The Scream Man]

I want one. He looks awesome, I love the storable weapon and he has his trailer. Brilliant!

[jaydisc]

It seems likely; on some of the photos of the back, there are more obvious than normal holes that could be used for attaching armour.

The plot thickens.

[canofwhoopass_87]

It seems likely; on some of the photos of the back, there are more obvious than normal holes that could be used for attaching armour.

Those are actually speed holes my man. Makes Optimus go faster

http://profile.ak.fbcdn.net/hprofile-ak-snc4/50510_256710319651_2455907_n.jpg

But in all seriousness I'd pounce on an armoured MP Magnus in a heartbeat

[Hursticon]

Those are actually speed holes my man. Makes Optimus go faster

http://profile.ak.fbcdn.net/hprofile-ak-snc4/50510_256710319651_2455907_n.jpg

LOL - I was waiting for someone to make that connection! :p:D

[kup]

hrmm... it just hit me that if they reboot Optimus Prime (and his variants) with MP10, they may also reboot Ultra Magnus. This mold may be prepping up for the Ultra Magnus Armor????

Ill get this one mold for sure.

If they do that, I will buy it. So far I don't really care for the Optimus release.

[Tober]

I'm liking what I see. :)

A renewal Convoy gives Takara a chance to address issues from the first release.

After the success of the Fansproject Magnus Upgrade set I'm sure Takara have considered the armor for a Magnus release. Only question is relative scale - how do they design the armor so he's a bit taller but not towering over Convoy and yet retain the G1 look... I'm looking forward to finding out. :)

[Tober]

Just got payment request. :)

[Zippo]

I forgot that I had preordered and got my payment request.
Hrm, can I find the $ in time.

[griffin]

More images of this figure (http://www.seibertron.com/transformers/news/first-in-hand-images-of-takara-masterpiece-mp10-convoy/22832/), now that it has been released.

[kup]

I really hope that the rumors of an official Magnus repaint with armor are true.

[Ultra Mackness]

I'm not sure how to embed links, but one of the Takara designers has uploaded pics to his twitter showing an MP-10 in a carved up G1 UM armour. Try:

http://www.seibertron.com/transformers/news/masterpiece-ultra-magnus-concept-image/22831/

I hope it's true. I'm really on the fence with MP-10. I've picked up all the other MP convoys and UM so I just cant justify it at the moment. But If this comes true, I'll have to get MP10.

[Robzy]

This is an amazing looking figure... can't wait to get mine!

[Shirokaze]

Horrible timing for this guy to be released. I decided to put in my order, and then I saw how far the AUD plummeted overnight :( Definitely having second thoughts.

[kup]

I'm not sure how to embed links, but one of the Takara designers has uploaded pics to his twitter showing an MP-10 in a carved up G1 UM armour. Try:

http://www.seibertron.com/transformers/news/masterpiece-ultra-magnus-concept-image/22831/

I hope it's true. I'm really on the fence with MP-10. I've picked up all the other MP convoys and UM so I just cant justify it at the moment. But If this comes true, I'll have to get MP10.

Yes I just saw that just before, thank you. Their mock up is very rough but it does make me hopeful that they will one day make an official MP Magnus with armor.

[Decepticon]

Id really like to get this!! Im not into G1 bricks usually(in the 80s ..yes....not 2011!) but have a soft spot for a big G1 Optimus:)

[Ode to a Grasshopper]

Want it, don't have the money for it, waiting on some reviews to decide if I get it for an expensive birthday present or something later.

[KaRNiV8L PRiME]

Just got shipping notice from Robot Kingdom!!!!!!! Hopefully here by next friday!!!!!!!

[kurdt_the_goat]

Got my RK shipping notice too!
Heaaaaaps of photos here:
9: Beginning of Act II (TF MP-10 Convoy play many Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1270.html&usg=ALkJrhhaf95tJQk9iq9UE57RDezZJsV7Zg)
1: A New Start (MP-10 Convoy Vehicle Mode Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1262.html&usg=ALkJrhhVpFN0yxvTeFlFKnVH1vKNVnVoTQ)
2: They also, Optimus (TF MP-10 Convoy Containers & Roller Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1263.html&usg=ALkJrhiO_RPJv0lNVNbBenWATuOvuj7EMg)
4: The impression is strong, silent type (TF MP-10 Optimus Prime robot mode Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1265.html&usg=ALkJrhgLxi-wNxmgchTBpd6Mj8zsDljY4A)
5: Fight! Super Robot Life Form! ! (TF MP-10 Optimus Prime robot mode action Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1266.html&usg=ALkJrhjoIGgClEoBtpsWhbzPamSzMgOsMw)
8: Health dock (TF MP-10 Convoy dock maintenance Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1269.html&usg=ALkJrhizd5TuTDwSxcKFhUDGG5aIm2bWVA)

I think i'm really going to enjoy this toy, despite it missing a lot of MP-1's gimmicks. They've nailed the look of both modes completely; the detail on the trailer is through the roof!
Being a smaller size he'll be nicer to play/fiddle with and i'm also surprised and overjoyed that spike can sit in Alternity toys, that can also drive into Prime's trailer! That just settled where he's going to display on my shelf, since i'm not gonna pack away MP-1 anytime soon.
They're different enough that both are worthy and i guess that's the best we could have hoped for.

[gdmetro]

Got my RK shipping notice too!
Heaaaaaps of photos here:
9: Beginning of Act II (TF MP-10 Convoy play many Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1270.html&usg=ALkJrhhaf95tJQk9iq9UE57RDezZJsV7Zg)
1: A New Start (MP-10 Convoy Vehicle Mode Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1262.html&usg=ALkJrhhVpFN0yxvTeFlFKnVH1vKNVnVoTQ)
2: They also, Optimus (TF MP-10 Convoy Containers & Roller Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1263.html&usg=ALkJrhiO_RPJv0lNVNbBenWATuOvuj7EMg)
4: The impression is strong, silent type (TF MP-10 Optimus Prime robot mode Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1265.html&usg=ALkJrhgLxi-wNxmgchTBpd6Mj8zsDljY4A)
5: Fight! Super Robot Life Form! ! (TF MP-10 Optimus Prime robot mode action Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1266.html&usg=ALkJrhjoIGgClEoBtpsWhbzPamSzMgOsMw)
8: Health dock (TF MP-10 Convoy dock maintenance Ver2) (http://translate.googleusercontent.com/translate_c?hl=en&ie=UTF8&prev=_t&rurl=translate.google.com&sl=auto&tl=en&u=http://higekumatoytoy.blog60.fc2.com/blog-entry-1269.html&usg=ALkJrhizd5TuTDwSxcKFhUDGG5aIm2bWVA)




Holy :eek: .. MP-10 looks sooo good!!! I already had interest in this from early pics, but after the full blown pics... (and mp-10 alongside classics figs..:D)

Too bad I don't have enough funds to spare for this at the moment. For a piece like this, despite an inevitable Hasbro release down the line, the high potential for a much worse paint job/ shortened smokestacks and other cuts makes me want MP-10 even more!

Re: MP Ultra Magnus- If there is concrete news that there will be a fully armored up MP- UM, then I will have to start saving for that.. no way Id miss out on that. However, from what I've read of rumors on TFW- it seems the next MP will be a new starscream/seeker.

[Zippo]

Well I managed to find the cash for one, but after seeing those pictures with the Classic bots, I really want to get one to open.

[kup]

Re: MP Ultra Magnus- If there is concrete news that there will be a fully armored up MP- UM, then I will have to start saving for that.. no way Id miss out on that. However, from what I've read of rumors on TFW- it seems the next MP will be a new starscream/seeker.

If that's the case then I would be disappointed. It's as if the line has been rebooted.

If that happens, I will probably not buy any more as I want new characters not characters I already own as MP.

[Ode to a Grasshopper]

Well, I caved in. Not opening him until my birthday in December but I gots one.
Hooray for living in Japan!

[Hursticon]

I'm in a similar boat to Kup, if the line is to be rebooted then this is a pretty poor move IMO. :rolleyes:
As Optimus, this MP-10 mold means very little to me and I'll only be buying it if it is used for a proper Ultra Magnus. ;)

It gets pretty boring very quickly when the same 4 characters keep being used, though, apparently via Twitter; 2 of the MP engineers put it to their followers who they'd most like to see as the next MP after Megatron 2.0 and the overwhelming majority voted Soundwave - This pleases me greatly. :cool:

[UltraMarginal]

As awesome as this is I can't justify $250, not for another prime. I already have the original hasbro MP and the MP-04 as well If it was $100 I'd jump on it, but not for $250, there is probably going to be a glut of MP-01 and MP-04 on the second hand market now too.

[Zippo]

Kinda annoying that this line might be heading towards the path of a reboot, heard rumors of Megatron and Starscream 2.0 ..

A smaller Megatron to be in scale with Convoy .. I can agree to that
But what was wrong with Starscream that he needs to be re-done again.

Move onto new characters, like Shockwave and Soundwave who are in scale with Convoy v2, Grimlock, Starscream and Rodimus.

[kurdt_the_goat]

But what was wrong with Starscream that he needs to be re-done again.

Nevar Forget!
http://i54.tinypic.com/ebdf1f.jpg
In all seriousness though, i agree.
Prime i can tolerate since i only have MP-01 and thus no trailer...
Megatron just to get him in scale is OK, but Starscream?
I don't have a problem with the original, nor do i want them to go through the endless repaints again before getting to what i have wanted since the beginning - MP Galvatron dammit!

[AussieJason]

Looks good and I'll probably get this, but still disappointed...

I'd love to see any of the following get the MP treatment next:

Soundwave (possible)
Jazz (unlikely ?)
Bluestreak (very unlikely)
Hound (very unlikely)
Omega Supreme (:rolleyes:)

[theheretic]

Looks good and I'll probably get this, but still disappointed...

I'd love to see any of the following get the MP treatment next:

Soundwave (possible)
Jazz (unlikely ?)
Bluestreak (very unlikely)
Hound (very unlikely)
Omega Supreme (:rolleyes:)

Although Omega would be awesome, the scale would suck OR we would be massive and thus cost a thousand.

I have only bought Hasbro MP up until now so this will be my first OP and I am really looking forward to him. I really hope they don't remake the seekers as IMO there was really not much wrong with them from what I can see on my screamer and skywarp (I'll seriously lose my shit if they remake them and do the usual repaints). From the pics I've seen Megs needs a better (more creative) version and Ultra Magnus armor would be great too! How long before there's an amazing unofficial one though. I really hope that for once they listen to the fans and make MP Soundwave and Blaster.

[Lord_Zed]

Looks good and I'll probably get this, but still disappointed...

I'd love to see any of the following get the MP treatment next:

Soundwave (possible)
Jazz (unlikely ?)
Bluestreak (very unlikely)
Hound (very unlikely)
Omega Supreme (:rolleyes:)

Galvatron
Galvatron
Galvatron
Galvatron
Galvatron
Shockwave

To be honest not sure I want, or its likely we'd ever see Autobot car, for one thing there's the licensing issue, and if they don't use the original vehicle modes there are already Binaltechs and Alternitys to fill that niche.

[1orion2many]

Come on people how can you miss Op's right hand man Ironhide, Really:rolleyes::p:D

[kurdt_the_goat]

Hasbro could save money by releasing an MP Ironhide without his head, since they like their G1 toy-accurate decos!

[Hereticpoo]

Soundwave is sooo uncrushomatic :p
Galvatron or Shockwave or another dinobot pweeez! :)

[loophole]

I really want a MP Cyclonus i reckon that would be rockin!!

[Hursticon]

I really want a MP Cyclonus i reckon that would be rockin!!

I could very easily get behind that ;):cool:, G1 Cyclonus is one of my most favourite toys of that era and by association Universe Cyclonus too. :D

[primetime]

Just got the MP-10 and while the dimensions and looks of this Optimus Prime is anime accurate - it just feels SO CHEAP - no diecast whatsoever except on the feet and still the same price as the old MP too??

Cost cutting much? That then pretty much leaves MP-01 as probably the only Masterpiece in the line with any substantial diecast content. sorry, in MP-10 there should have been more diecast esp. in the body and legs - red plastic really sucks.

[1orion2many]

OUCH! For that price I would have thought it'd be mainly diecast, talk about a rip-off. I will give it this, It is a very nice looking MP but unfortunately it's just another Prime as far as I'm concerned.:rolleyes:

[primetime]

OUCH! For that price I would have thought it'd be mainly diecast, talk about a rip-off. I will give it this, It is a very nice looking MP but unfortunately it's just another Prime as far as I'm concerned.:rolleyes:

Yeah talk about OUCH, granted it is a very anime accurate Prime - but compared to the original MP-01 there just simply is no comparison - just feels real cheap, compared to the real diecast heft that's there in MP-01.

No gimmicks whatsoever no working suspension and plastics all over really kills it

[kurdt_the_goat]

I think you're being a bit harsh! The new one makes the oldie feel a bit clunky... especially when it comes to posing. The plastic quality and vibrancy of the colours seems pretty good to me also, better than on Rodimus Prime at least.

[primetime]

I think you're being a bit harsh! The new one makes the oldie feel a bit clunky... especially when it comes to posing. The plastic quality and vibrancy of the colours seems pretty good to me also, better than on Rodimus Prime at least.

Not for $250+ though! For something that is smaller, almost no die-cast, even third party rollers are better in that they have wheels that are able to rotate.

MP-10's trailer is pretty boring as well with unpainted gray robot arms on the inside.

[Ultra Mackness]

I really wanted to like this one. New transformation sequence and design, inclusion of roller and Spike. Side mirrors! I just don't feel it like I did with the original MP Prime. MP 10 is undeniably cleverly designed, but the near absence of die cast or electronics, no minor gimmicks (moving faceplate etc.), out of scale weapon and smaller size coupled with the high price tag just can't get me over the line :(. Even though Has/Tak milk the popular characters, this is the first time (for me anyway) where it really feels like the MP Prime idea is just being milked.

Like many others I'd love to see some other characters get the MP treatment, especially Omega Supreme. With him being a parts-former, I can see his various parts being a bonus with the next few MP releases, then a final release with his tank and rocket (maybe) to spread the cost. It's not likely but I can hope :).

[kurdt_the_goat]

Not for $250+ though! For something that is smaller, almost no die-cast, even third party rollers are better in that they have wheels that are able to rotate.

MP-10's trailer is pretty boring as well with unpainted gray robot arms on the inside.

yeah roller should have had the turning wheels that THS02 has! tho i paid about 250 myself... i dont think it's worth that much ... but dont really care... i know i should though :p

keep in mind that in japan he's only going for about 16,000Y, thats about 3,000Y more than MP04 cost, 5 years later.

Compared with MP09, it's about the same, unfortunately just the way things are :( Smart thing would have been to wait for Hasbro version if you knew you would feel this way about trailer!

[primetime]

Yeah, I guess at the end of day, having the chance to play with it a few times - this probably is the sort of Masterpiece that you can play with day in and day out and one thing it's got going for it is that the extreme poseability factor compared to MP-01 - this Prime's just leagues ahead!

[Tober]

Yeah, it's a great mold. Lack of (imho useless) gimmicks aside, the real problem is the price (realistically about $200 + shipping) which is largely due to the strong Yen.

The plastic is high grade ABS, not the cheap, brittle KO stuff.

If people want to wait a year or so for the local release, that's their prerogative. But I wouldn't expect the price to be sub $200, although I was pleasantly surprised by MP Rodimus. :confused:

[Defcon]

For me, the price is the biggest obstacle. The size is good as you could put it in with classics. If they decide to re do megatron in this size, I wonder if they will keep the realistic gun mode, or change it to something else like perhaps a cybertronian gun or a tank like generation 2 megatron? But only in keeping the original G1 colors and theme. Only saying this so it doesn't become a problem with customs or gun laws etc. I would hate if they redid Starscream, just seems a waste.
Well for future releases Id like to see Galvatron, Soundwave (including minions). Ultra Magnus with trailer and armour, Blaster (including minions), and how about triple changers Astrotrain, Blitzwing, Springer

[Ode to a Grasshopper]

Eh, we'll probably get a MP Bumble or somethIng before a Soundwave.:(

As a minor aside, what's the big deal over heaps of diecast? Didn't it make MP1 etc kinda top-heavy and hard to pose?
I'm all up for it when it serves a stability or durability purpose but die cast for the sake of die cast seems a bit pointless to me... Is it like a nostalgia thing or what?:confused:

[Tober]

Eh, we'll probably get a MP Bumble or somethIng before a Soundwave.:(

As a minor aside, what's the big deal over heaps of diecast? Didn't it make MP1 etc kinda top-heavy and hard to pose?
I'm all up for it when it serves a stability or durability purpose but die cast for the sake of die cast seems a bit pointless to me... Is it like a nostalgia thing or what?:confused:

It's sorta nostalgia. Goes back to the original Chogokin toys of the 70s where spaceships and super robots didn't feel "right" to kids unless they were full of metal that reflected the scale of the robots.

Diecast is still associated with quality although few toys, even the DX lines, still have any beyond essential internal frames.

[Ode to a Grasshopper]

Cheers, that sorta makes sense.:)

[Magnus]

I really like the look of this mould (particularly the cab, which is a vast improvement over MP-1), save for the thin upper arms in robot mode. I'd get it... if I didn't already have MP-1/20th Anniversary Optimus.

As others have stated, I'd like to get this mould as an MP Ultra Magnus with trailer/armour.

[Sarquiss]

Just got a MP-10 Optimus Prime for $150 delivered from TFW2005 :D

I cannot wait to have it in my hands :)