MP-11 Starscream reissue from Hasbro HK

[nsm034]

http://www.bigbadtoystore.com/bbts/product.aspx?product=TAK11770&mode=retail

a lot of people will like this

[CBratron]

I like the part where at $200, it still undercuts ebay prices.

[Trent]

If you don't already own it, this is one of the best MP moulds made. He looks great on display.

[Shirokaze]

I think I'll take your advice on this Trent! Will be in Japan when BBTS has him scheduled for release, so should be able to pick him up for a reasonable price in Akihabara. :)

[Megatran]

I've only started getting back into TFs this year, so I missed the original release. Gotta have him. What a cracking year of MP releases! Thick and fast.

A couple of questions that I hope someone can answer.
Is MP-11 Coronation Starscream the 'new' or 'old' mould? I have the Hasbro MP Thundercracker so not sure if they are from one and the same mould.

And what was the price of the original release? Just out of curiosity.

Will other stores have him? BBTS tends to be more expensive than the others.

[Ploughmans Lunch]

I think I'll take your advice on this Trent! Will be in Japan when BBTS has him scheduled for release, so should be able to pick him up for a reasonable price in Akihabara. :)

I think he might be a Chinese reissue, in which case it might not be as cheap or? I don't know.

[Omega Metro]

It's a Chinese only reissue. Not available in Japan apparently.

[Trent]

I've only started getting back into TFs this year, so I missed the original release. Gotta have him. What a cracking year of MP releases! Thick and fast.

A couple of questions that I hope someone can answer.
Is MP-11 Coronation Starscream the 'new' or 'old' mould? I have the Hasbro MP Thundercracker so not sure if they are from one and the same mould.

And what was the price of the original release? Just out of curiosity.

Will other stores have him? BBTS tends to be more expensive than the others.

Yes it is the same mould as Hasbro Thundercracker. Except it doesn't come with a stand or missiles, which is a shame. I managed to get my hands on a MP Starscream stand from a fellow board member and it definitely adds to the figure. He looks much more regal with it.

And as for cost, I can't quite remember what I paid but it was far from the cheapest MP going. I think somewhere in the vicinity of $160-$170 delivered?? So this release, all things considered, isn't that bad a price.

And yes other stores no doubt will have him as well. Robot Kingdom or Chimungmung might be your best bet. They'll be almost certainly cheaper than BBTS too ;)

[trevorlucks]

I have the original hasbro release of mp (3or4? was it) which ive modded to more or less look cartoon accurate. Is it really worth getting this if you already have the old one.
I'd be interested to hear the opinions of those who have owned either or both versions.

[Sinnertwin]

I prefer the alt mode of MP3 mold, but the robot mode & colours of the MP11.
I wonder if MP03 would've been the new MP11 if things were different.

[Shirokaze]

It's a Chinese only reissue. Not available in Japan apparently.

Damn :o

Oh well, I'll see how things play out once other stores start putting up pre-orders. :)

[Trent]

I have the original hasbro release of mp (3or4? was it) which ive modded to more or less look cartoon accurate. Is it really worth getting this if you already have the old one.
I'd be interested to hear the opinions of those who have owned either or both versions.

If you already have Hasbro Starscream, then then my suggestion would be not to worry about it. It's a lot of money for a few upgrades to the mould and a cape. And if you've modded it, then I definately wouldn't bother. Maybe try and convive someone with a MP Sunstrorm to sell you their coronation set.

[UltraMarginal]

The coronation set does not fit the MP-03 version of Masterpiece starscream, I tried using the sunstorm gear and it's all just not quite right. even the crown is too big.

[Megatron]

http://www.bigbadtoystore.com/bbts/product.aspx?product=TAK11770&mode=retail


"Starcream"?? Please tell me it's not going to be printed like that on the actual box... :eek::rolleyes:

Anyway, I don't have an MP-11 yet and am looking for one. What differences will this reissue have to the original?

[Cat]

"Starcream"?? Please tell me it's not going to be printed like that on the actual box... :eek::rolleyes:

Anyway, I don't have an MP-11 yet and am looking for one. What differences will this reissue have to the original?

I thought it was Autobot cream?

[Megatron]

I thought it was Autobot cream?

lol... how did I just know you were going to say that? :rolleyes::p

[Sinnertwin]

Much like the second run of Soundwave & MP10, I suspect this'll be a straight reissue of the existing colour schemes etc.
Although some form of a stand like the one found with the reissue of MP10 or the existing one from the original MP03 as a 'bonus' would've been a welcome addition.

[Cat]

lol... how did I just know you were going to say that? :rolleyes::p

I'm still giggling. :D

And this'll probably be a straight reissue, so I wouldn't expect any differences.

[Kranix]

Fantastic and exciting news! Man I hope I can get a hold of this guy! :D

[Robzy]

I pre-ordered just in case. But hoping that RK get them... will be cheaper than BBTS shipping wise.

[GoktimusPrime]

Meh, I personally was never interested in the first MP11, so the reissue doesn't tickle my fancy. The original MP03 moulds for Starscream, Skywarp and Thundercracker are good enough for me, IMHO the improvements in the robot mode on the MP11 mould doesn't justify purchasing the same characters again in the MP11 remould; but I'm happy enough to collect the Rainmakers in the MP11 mould. Also helps to make the Rainmakers look more distinct from the 'main' Seekers. ;) :D

Considering the quality issues that Mayzaprime and I have experienced w/ out Acid Storms, I do hope that this MP11 reissue doesn't suffer from further mould degradation issues. If Acid Storm does suffer from degradation (and it's not just Mayzaprime and I lucking out by fluke), then I would hope that Hasbro HK does something to address it, lest the MP11 reissue suffers similar problems or possibly even worse as the mould continues to deteriorate.

[drifand]

I missed mp starscream, but this is not cheap for my budget either. I will have to think about it.

[Sinnertwin]

I missed mp starscream, but this is not cheap for my budget either. I will have to think about it.

Don't think, buy. :p:D

[Megatran]

I wish Robotkingdom got their act together. No MP Starscream or MP Grimlock listed. The 'surge' in the aussie dollar is making these more attractive.

And BBTS has sold out on preorder of MP Starscream.

[Kranix]

I've been looking around the sites I know to try and purchase one of this second run of MP11 and despite its release date seemingly being December 2013 It's not available via a lot of the normal vendors yet. The going rate seems to be $199 US plus shipping. Do you guys think this the best I am likely to do? Thanks.

[1orion2many]

Try this http://www.ehobbybaseshop.com/?sp=&p=6&cat2=2&cat1=3&cat0=3&id=10&cat1=3&cat0=3&new=&more=&lang=en

[Kranix]

Thanks 1orion2many, I will give that a go.

[Kranix]

I was ready to order this MP-11 but a good mate of mine is heading to Shanghai to live very shortly and offered to pick me one up, does anyone know if this is likely to be cheaper in Shanghai? If so any ideas where to purchase? Thanks :)

[drifand]

^ Not necessarily cheaper though, wished it wasn't that expensive.

[Megatran]

Has the availability date been confirmed for this reissue? Late November was previously indicated but it is almost upon us. :confused:

[theshape]

Is this available for pre order or sale anywhere? seems sold out everywhere :confused:

[lancalot]

Has the availability date been confirmed for this reissue? Late November was previously indicated but it is almost upon us. :confused:

i just got the notice to pay for him yesterday ...so he out soon then ...
:)

[1orion2many]

I just can't understand the price increase when they do second runs on these items. The initial research & development costs would have been on the first run so if anything this second run would be cheaper to manufacture with none of the aforementioned attached to this production run. Seems like they are having a lend of collectors in general:rolleyes:

[lancalot]

I just can't understand the price increase when they do second runs on these items. The initial research & development costs would have been on the first run so if anything this second run would be cheaper to manufacture with none of the aforementioned attached to this production run. Seems like they are having a lend of collectors in general:rolleyes:

actually it just rrp price of the first one...it wasn't any increase at all.... Not like the MP grimlock...:mad: that one just a Crazy increase ...

[Lint]

I just can't understand the price increase when they do second runs on these items. The initial research & development costs would have been on the first run so if anything this second run would be cheaper to manufacture with none of the aforementioned attached to this production run. Seems like they are having a lend of collectors in general:rolleyes:

Because this:

http://i40.tinypic.com/34npt3m.jpg

[UltraMarginal]

That and why when running a business and releaseing a second issue of something that is selling on the secondary market for well over the initial value you sold it for would you not capitalise on that and sell your re-issue for a bit more?

it's just good business sense, it sucks for us, but that's how it is.

[Megatran]

http://i40.tinypic.com/34npt3m.jpg

Looks like a three year old trying to draw a Pepsi Coke bottle. :D

[theshape]

Managed to buy one of these off ehobbybase. Think they may have more left

[GoktimusPrime]

actually it just rrp price of the first one...it wasn't any increase at all....
$200 is about $50~60 dearer than MP11's original price.


I just can't understand the price increase when they do second runs on these items. The initial research & development costs would have been on the first run so if anything this second run would be cheaper to manufacture with none of the aforementioned attached to this production run. Seems like they are having a lend of collectors in general:rolleyes:
^This.

Because this:
<snip.pic>
Yep. That's why some TF production has been moved over to Vietnam (e.g. some Bot Shots).

[lancalot]

$200 is about $50~60 dearer than MP11's original price.


the preorder was only $159 :)

[Megatran]

the preorder was only $159 :)

$159 ... Where? I paid an extra US$20 (+ US$28 shipping) at Chimungmung.

[Kranix]

Are you guys talking USD? $159 AUD would be an awesome price and would make me mad :D

I just ordered the reissue MP11 from ishop2go.com for $155.93 USD plus shipping, so it comes out just over $200 AUD all up delivered plus other costs. More than I wanted to spend and the most I ever have spent on a Transformer (next being TRU MP Soundwave) but I was unsure if MP11 Starscream would ever be released by Hasbro (thus TRU AU) so I pulled the trigger.

[theshape]

I paid $169 + 33 USD shipping from ehobbybase. about $220AUD

[lancalot]

Are you guys talking USD? $159 AUD would be an awesome price and would make me mad :D

I just ordered the reissue MP11 from ishop2go.com for $155.93 USD plus shipping, so it comes out just over $200 AUD all up delivered plus other costs. More than I wanted to spend and the most I ever have spent on a Transformer (next being TRU MP Soundwave) but I was unsure if MP11 Starscream would ever be released by Hasbro (thus TRU AU) so I pulled the trigger.

yeah it USD $

[sifun]

they just refunded my money. Ishop2go - not buying from them again.
Gotta look for another place to get it now

[Kranix]

they just refunded my money. Ishop2go - not buying from them again.
Gotta look for another place to get it now

Same here unfortunately :(

[Megatran]

they just refunded my money. Ishop2go - not buying from them again.
Gotta look for another place to get it now

Did they give an explanation? I've never purchased from them before so can't pass judgement. I wonder if other Ozformers members who pre-ordered MP Starscream Reissue from this site also got fobbed off as well???

I pre-ordered mine from Chimungmung and have received dispatch notification on Thursday. I can't locate this item on their online store so am assuming that it is (temporarily) out of stock.

Some of the previous post mentions ehobbybase but I've never bought from them.

[theshape]

I bought mine from them. They have said he's shipped. I'll post when I get it.

[villeneuve]

Wow that things look awesome!

[lancalot]

Did they give an explanation? I've never purchased from them before so can't pass judgement. I wonder if other Ozformers members who pre-ordered MP Starscream Reissue from this site also got fobbed off as well???

I pre-ordered mine from Chimungmung and have received dispatch notification on Thursday. I can't locate this item on their online store so am assuming that it is (temporarily) out of stock.

Some of the previous post mentions ehobbybase but I've never bought from them.


I bought mine from them. They have said he's shipped. I'll post when I get it.

yeah i got it from ehobby as well... my got shipped and is coming ... :)

[theshape]

Just got mine.

[Robzy]

Just got mine from ehobbybase (based off positive recommendations I read on this forum)... Very happy! He arrived quickly and is in perfect condition - I even got him $10 cheaper cos the box was "damaged" (barely noticeable!!)

[griffin]

Just to avoid confusion (since the online store uses a confusing name), since people are throwing around "ehobby" and "ehobbybase", it should be noted that the HK online store is at ehobbybaseshop (http://www.ehobbybaseshop.com/) for anyone looking for it. (note that it isn't in Japan, and has nothing to do with ehobby)

The reissue Starscream (which is by Hasbro HK not TakaraTomy) is on there for a hefty US$190 (http://www.ehobbybaseshop.com/?p=6&ev=&id=10), or US$180 (http://www.ehobbybaseshop.com/?p=6&ev=&id=968) if you don't mind a dented corner to the box. Otherwise, BBTS have it for US$200 (http://www.bigbadtoystore.com/bbts/product.aspx?product=TAK11770&mode=retail) if you prefer them.

(A mould that already paid for itself, is supposed to be cheaper when used again... not double the price - it's like Hasbro HK are preventing scalping by being the scalpers and pricing their items based on what they see it is going for on ebay)

[UltraMarginal]

(A mould that already paid for itself, is supposed to be cheaper when used again... not double the price - it's like Hasbro HK are preventing scalping by being the scalpers and pricing their items based on what they see it is going for on ebay)

Yes but they are trying to maximise their profits, if there is a market out there willing to pay that sort of money for this why wouldn't they charge those prices? I'm not part of that market and if this release was $100 I would probably think about it.

We've seen them do this with multiple different releases over the last few years and it's not just Hasbro HK.

[Megatran]

Huhhhhhh.... still waiting for mine to arrive. Might have to send Laserbeak on a mission to track down my parcel.

[1orion2many]

Yes but they are trying to maximise their profits, if there is a market out there willing to pay that sort of money for this why wouldn't they charge those prices? I'm not part of that market and if this release was $100 I would probably think about it.

We've seen them do this with multiple different releases over the last few years and it's not just Hasbro HK.

I agree, If it was $100.00 like it should be I would have looked at buying this item even though I have the 2 previous MP Screamers:o

[Myke]

I noticed what appears to be 2 different boxes for MP-11 floating around the web.

http://tformers.net/g/generated/17393/takara-masterpiece-mp-11-coronation-starscream%20(01)__scaled_600.jpg

and

http://4.bp.blogspot.com/-c4_2fdtyj5M/Uk5ORZxgl2I/AAAAAAAAXLY/F5Xg_YfbqM4/s1600/TAKARA_TRANSFORMERS_MASTERPIECE_MP-11_STARSCREAM_REISSUE_01.jpg

Is the first picture simply the initial MP-11 issue? Apart from the box itself, are the contents identical?

Thanks

[Myke]

hmmm first pic didn't come out:

http://photo.eptoy.com/ebayphoto/tf_mp11_01.jpg

[lancalot]

I don't think the second pic is a box but just a composition of images , I only seen only one type of box for mp11 , I got both the first and the reissue and they the same everything.. boxes and all

[Myke]

I don't think the second pic is a box but just a composition of images , I only seen only one type of box for mp11 , I got both the first and the reissue and they the same everything.. boxes and all

Gotcha thanks! Maybe we don't need that washing machine afterall...

[Sinnertwin]

Gotcha thanks! Maybe we don't need that washing machine afterall...

A washboard & a bit of elbow grease, you'll be right.