Yamato & Bandai Macross Toys

[Tober]

BANDAI 1/60 Super and Armor packs for the VF-25F and S have been announced as web-shop exclusives.

----------------------------------------------------------------------------

So here's something I thought I'd never say after buying the first VF-25:

The BANDAI 1/60 DX line is awesome!*

http://i273.photobucket.com/albums/jj230/AUST_Tober/IMG_0105.jpg

* but not as good as the Yamato 1/60 line...

[Lord_Zed]

BANDAI 1/60 Super and Armor packs for the VF-25F and S have been announced as web-shop exclusives.

----------------------------------------------------------------------------

So here's something I thought I'd never say after buying the first VF-25:

The BANDAI 1/60 DX line is awesome!*


* but not as good as the Yamato 1/60 line...

Glad I pre-ordered one then.

Are you going to do a mini review on the new 25? After the 29 which I get the feeling was lackluster from your opinion, saying the DX line is awesome is significant praise.

I am already a huge fan of the 27 toy though, so half way there.


So how do we get our hands on these web exclusives? I assume they are just armour and they will latter re-release the armour and toy together in one set when they have enough of our money.:D

[Dkaris]

maybe a middleman service?

[Tober]

The 29 was just as great when it came out of the box. It took a few months of doing nothing for the joints to loosen. So whilst I wouldn't have had a problem recommending it at the time, I'm not so sure now. Not that I'd give up my 29, I still like it a lot, it's just disappointing that there is a structural flaw. The 27s have loosened a bit too, but not as severely.

The 25 has the same luster and quality as the 29. The plastic is semi-glossy but not as much as the first version 25s. The proportions and articulation are massively improved. The canopy is a slight gray instead of purple. The head has a neck. The head lasers are rubber but much sturdier than the first release, so they stay straight. The leg fins tuck into the legs (possibly for the armor). The swing wings have detentures so they partially lock at certain angles. The paint apps and detailing on mine are fine (been a few sloppy jobs reported on MW tho). The cockpit and pilot have more detail. The transformation to and back is easier than the 29 due to the smaller shoulders.

Now if only BANDAI would do the VF-171...

----------------------------------------------------

Anime Export might have the super parts for sale as they did for the 29. Otherwise I would go through Ryan at Fantofan.jp.

I expect we will see bundled versions later, especially for the Tornado set, but wouldn't want to be quoted on it.

------------------------------------------------------

I wathched the second Frontier movie today. Kinda nice, but I still haven't worked out what was going on... :confused:

[VGMStudios]

VF-25F..

I want him...I want him...I want him...I want him...

Everywhere is sold out! :(

[Tober]

VF-25F..

I want him...I want him...I want him...I want him...

Everywhere is sold out! :(

eToys (http://www.etoysjapan.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=2035&category_id=185&manufacturer_id=0&option=com_virtuemart&Itemid=1) still has it in stock, but full retail price + Japan Shipping. :(

[kurdt_the_goat]

New pics of VF-17S in Dengeki Hobby courtesy Graham on MWF

http://i41.tinypic.com/4szo0y.jpg

Looks a lot tighter, he thinks this is the ABS test shot vs Resin in the last shots.

[Lord_Zed]

Lookin mighty sleek, I like!:)

[STL]

eToys (http://www.etoysjapan.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=2035&category_id=185&manufacturer_id=0&option=com_virtuemart&Itemid=1) still has it in stock, but full retail price + Japan Shipping. :(

Ouch that's gonna hurt. What are the chances of a new run? I'm factoring in once I get it, I'll need the Super packs too. And I have an original which is going to seriously hurt.

The VF-25S is sold out too. =(

[Tober]

Ouch that's gonna hurt. What are the chances of a new run? I'm factoring in once I get it, I'll need the Super packs too. And I have an original which is going to seriously hurt.

The VF-25S is sold out too. =(

No confirmation of a new run yet. The version 1 sold out pretty quickly too and was re-issued shortly afterward. Weather or not it's worth taking the chance is up to you tho, sorry I can't really be more help.

Anime Export still list the VF-25S Ozma pre-order (http://www.anime-export.com/product/7657). Not sure if the pre-order discount still applies tho... it might have expired two weeks ago.

[Tober]

Amiami just restocked (http://www.amiami.jp/shop/?set=english&vgForm=ProductInfo&sku=TOY-RBT-1598&template=default/product/e_display.html) the VF-25F.

Pre-order discount has diminished tho. :rolleyes:

[Lord_Zed]

Good thing I pre-ordered an Ozama, if that's the case.

I'll take a gamble and wait for a fastpack bundled Alto.

[Dkaris]

What are the odds of Bandai rereleasing michael and lucas valks? im sort of keen for them but i dont see the point in picking them up now if there will be newer versions coming out soon.

[Tober]

BANDAI super parts for the 1/60 VF-25F and VF-25S are up for pre-order from the Tamashii Web Shop.

http://i273.photobucket.com/albums/jj230/AUST_Tober/zQ1oLEfIu1ZZsCYi6Hywjg.jpg http://i273.photobucket.com/albums/jj230/AUST_Tober/pkJYXDOdsX68LKJvDWUAg.jpg http://i273.photobucket.com/albums/jj230/AUST_Tober/ggfYPBB1WpFAnZvAiaC5Mg.jpg

http://i273.photobucket.com/albums/jj230/AUST_Tober/asW5RZOFf3si9QULF0qgzw.jpg http://i273.photobucket.com/albums/jj230/AUST_Tober/tEhoriKxr6LxdCWuGweLSA.jpg http://i273.photobucket.com/albums/jj230/AUST_Tober/l6mwXyHRrADwWCT2f7ydNw.jpg

[VGMStudios]

Oh sweet spit! Cant wait to order these things. Is the Tamashii web shop the only place to get these?

[Tober]

Oh sweet spit! Cant wait to order these things. Is the Tamashii web shop the only place to get these?

Yes, exclusive to Tamashii Web Shop. You will need to use a proxy service such as Tokyo Hunter for 6000jpy +S&H, or Fan to Fan. Otherwise Anime Export have listed them for 7650jpy +S&H.

[STL]

What are the odds of Bandai rereleasing michael and lucas valks? im sort of keen for them but i dont see the point in picking them up now if there will be newer versions coming out soon.

I'd say pretty damn good. I'm excited for those as I only originally had the VF-25F and VF-25S and kept wondering when I'd get those. Now I get better versions. I'm hoping once super armor is all good and done, they'll be next

[Tober]

http://i273.photobucket.com/albums/jj230/AUST_Tober/photo01.jpg

[VGMStudios]

Yes, exclusive to Tamashii Web Shop. You will need to use a proxy service such as Tokyo Hunter for 6000jpy +S&H, or Fan to Fan. Otherwise Anime Export have listed them for 7650jpy +S&H.

Actually I did a search and found it for 5000 something yen.
So Its all good. :)
thanks for the info.

[Tober]

Interesting tid-bit of info from a certain reliable Japanese retailer for those that missed out on the BANDAI DX VF-29:


A rerelease of the 29 is coming sometime next year they just want to
hold back for a while they do the 25 Ver.20.

Treat it as a rumor until it happens, and don't link this post. Thanks. :)

[Tober]

HLJ has another Macross Sale (http://www.hlj.com/scripts/hljlist?SaleGroup=SALEMACROSS&header=macsal1211) on, including the 1/60 YAMATO VF-11C (http://www.hlj.com/product/YMT00182) for about $170 and VF-19 Kai (http://www.hlj.com/product/YMT00214) for about $200, an improved version of which apparently gets released later this month.

[Lord_Zed]

HLJ has another Macross Sale (http://www.hlj.com/scripts/hljlist?SaleGroup=SALEMACROSS&header=macsal1211) on, including the 1/60 YAMATO VF-11C (http://www.hlj.com/product/YMT00182) for about $170 and VF-19 Kai (http://www.hlj.com/product/YMT00214) for about $200, an improved version of which apparently gets released later this month.

Any idea if the improvements have already been incorporated into the Blazer VF19?

[Tober]

Any idea if the improvements have already been incorporated into the Blazer VF19?

Yes, they have. Better ankle joints and improved durability on the back of the legs.

[Tober]

Yamato 1/60 VF-4G teaser pic.

Webshop exclusive, although probably will be stocked by HLJ.com.
February pre-order


http://i273.photobucket.com/albums/jj230/AUST_Tober/53.jpg

[Lord_Zed]

Yamato 1/60 VF-4G teaser pic.

Webshop exclusive, although probably will be stocked by HLJ.com.
February pre-order


http://i273.photobucket.com/albums/jj230/AUST_Tober/53.jpg

Want!

[Tober]

BANDAI armor parts for the 1/60 VF-25F and VF-25S are Tamashii Web Shop exclusives. So 8,190jpy + proxy services.

http://i273.photobucket.com/albums/jj230/AUST_Tober/OzmaSup.jpg http://i273.photobucket.com/albums/jj230/AUST_Tober/AltoSup.jpg

[Tober]

Plastic Model Macross Plus YF-19 "Eggplane" (http://www.amiami.com/top/detail/detail?gcode=TOY-RBT-2199&page=top)

http://i273.photobucket.com/albums/jj230/AUST_Tober/TOY-RBT-2199.jpg

[STL]

I've been putting off the VF-25F renewal. Not getting cheaper even with the higher FX rate. Need to get this done sooner or later.

[jazzcomp]

Got the VF-1S Roy Custom 1/100 Bandai Hi Metal for $100

[Tober]

Yamato 1/60 VF-4G CAD pics

No price or release date info yet.

http://i273.photobucket.com/albums/jj230/AUST_Tober/vf-4gcad.jpg

[Tober]

The BANDAI 1/60 DX YF-29 is to be reissued in May.

Upcoming QF-3000E Ghost and SF-3A Lancer II

http://i273.photobucket.com/albums/jj230/AUST_Tober/QF-3000andLancerII.jpg

[Raptormesh]

Yamato 1/60 VF-4G CAD pics

No price or release date info yet.

http://i273.photobucket.com/albums/jj230/AUST_Tober/vf-4gcad.jpg

A bit apprehensive about the price, but that's fantastic.

[Tober]

A bit apprehensive about the price, but that's fantastic.

Yeah, it looks promising, but I already have $500 put aside for it and I doubt that will be enough.

Welcome (back) to OTCA. :)

[STL]

The BANDAI 1/60 DX YF-29 is to be reissued in May.


Do you know where pre-orders are? I can't see them listed anywhere.

[Tober]

Do you know where pre-orders are? I can't see them listed anywhere.

No pre-orders yet.

So far it's only stated on the Cyber Gundam Blog. Here (http://blog.yahoo.com/cybergundam/articles/617369/index), down the bottom.

[VGMStudios]

WAIT... Im confused!!! IS this YF-29 something NEW?
Cause I JUST bought this:
http://img329.auctions.yahoo.co.jp/users/0/5/9/9/ruminarie820-img600x450-1327400919amug4694091.jpg
with Super Parts!!

Is this the same thing or something completly differet??

VGM out...

[Tober]

WAIT... Im confused!!! IS this YF-29 something NEW?

No, it was first released last June. Super parts in November.

It's unknown is the reissue will fix the loose joints or be different in any other way.

[jazzcomp]

are the hi-metal 1/100 vfs any good? or are you better off buying a bigger version?

[Tober]

are the hi-metal 1/100 vfs any good? or are you better off buying a bigger version?

The 1/100 BANDAI Hi-metals are like a scaled down version of the Yamato 1/48 and 1/60 series.

The Yamatos are 'perfect transformation' whereas the Hi-Metals have swap out parts for the head-shield as well as swappable wings (from a rough memory).

From a 'bang for your buck' outlook I would recommend the Yamato 1/60 ver.2 series. I'm not even sure they are more expensive* given many of the later Hi-metal releases were Tamashi exclusives. And if you go looking for the 1/60 series don't get the ver.1 Valks (as they are kinda crap), buy from reputable online stores only, not eBay.

Scorched Earth Toys (http://anymoon.com/blog/?p=4000) is a good resource for lots of Macross toy reviews.

In my opinion, the Hi-metals are nice. But because the 1/100 line was effectively canceled I only have a single VF-1J and the VF-19 Fire Valk.

*The VF-19 series is an obvious exception

[jazzcomp]

The 1/100 BANDAI Hi-metals are like a scaled down version of the Yamato 1/48 and 1/60 series.

The Yamatos are 'perfect transformation' whereas the Hi-Metals have swap out parts for the head-shield as well as swappable wings (from a rough memory).

From a 'bang for your buck' outlook I would recommend the Yamato 1/60 ver.2 series. I'm not even sure they are more expensive* given many of the later Hi-metal releases were Tamashi exclusives. And if you go looking for the 1/60 series don't get the ver.1 Valks (as they are kinda crap), buy from reputable online stores only, not eBay.

Scorched Earth Toys (http://anymoon.com/blog/?p=4000) is a good resource for lots of Macross toy reviews.

In my opinion, the Hi-metals are nice. But because the 1/100 line was effectively canceled I only have a single VF-1J and the VF-19 Fire Valk.

*The VF-19 series is an obvious exception
how much did those hi-metals cost you?

[Tober]

how much did those hi-metals cost you?

The VF-1J retails for ¥5,500. The VF-19 retails for ¥7000. Not sure what pre-order discounts I received.

This (http://www.anime-export.com/product/6216) is an example of a Tamashi exclusive VF-1J at ¥10500. Roughly the same price as a 1/60.

[VGMStudios]

No, it was first released last June. Super parts in November.

It's unknown is the reissue will fix the loose joints or be different in any other way.

So do you think what I bought was a waste of money because of the newer coming out?

VGM out...

[jazzcomp]

The VF-1J retails for ¥5,500. The VF-19 retails for ¥7000. Not sure what pre-order discounts I received.

This (http://www.anime-export.com/product/6216) is an example of a Tamashi exclusive VF-1J at ¥10500. Roughly the same price as a 1/60.
Is this with/without shipping? Thanks!

I was re-thinking due to the cost. I got my VF-1S w/ super parts for $100.


Most of these hi-metals don't have super parts, right?

[Tober]

So do you think what I bought was a waste of money because of the newer coming out?

Besides the approximate release date and ¥17000 RRP there is no new info for the reissue. Depends on what you paid for the set and how happy you are with it. The super parts must be reasonably hard to come across by now in themselves.


Is this with/without shipping? Thanks!

I was re-thinking due to the cost. I got my VF-1S w/ super parts for $100.


Most of these hi-metals don't have super parts, right?

That was without shipping. After the first VF-1J release I lost interest in the 1/100 line, so I couldn't tell you off-hand. And I tend to get the Bandai and Toynami 1/100 releases confused.

I can bring a 1/60 to the Feb Parra Fair if you want to check it out first hand.

[jazzcomp]

That was without shipping. After the first VF-1J release I lost interest in the 1/100 line, so I couldn't tell you off-hand. And I tend to get the Bandai and Toynami 1/100 releases confused.

I can bring a 1/60 to the Feb Parra Fair if you want to check it out first hand.
It's ok, I bought I think 1/60 versions from Fungal I awhile back. The Toynami ones are definitely cheaper. :)

The High metal VF-1A near $90 is a bit steep for me. I did see one of those VF-IJ exclusives. But since my 1/60 version is already VF-IJ, I wasn't interested.

How about that VF-1S Roy F "Do you remember love?" that one of the members here is selling, is that version 2?

[Tober]

How about that VF-1S Roy F "Do you remember love?" that one of the members here is selling, is that version 2?

Link or pic? I didn't find it.

[Tober]

BANDAI have updated their Tamashi site (http://tamashii.jp/item/item.php?eid=01499&saihanumu=01&hatsubai7=2012&hatsubai4=05) to officially announce the YF-29 re-issue in May.

Pre-orders should go up soon.

[jazzcomp]

Link or pic? I didn't find it.
Here it is.
http://otca.com.au/boards/showpost.php?p=280512&postcount=23

Is this better? This is takatoku -
http://otca.com.au/boards/showpost.php?p=279557&postcount=8

[Tober]

Here it is.
http://otca.com.au/boards/showpost.php?p=280512&postcount=23

That's a ver 1. Honestly, I'd avoid it unless you prefer the fighter mode. The gerwalk and battroid are awful. Especially the 1S, it has a squashed looking head. Take a look at the TV reissue (http://www.amiami.com/top/detail/detail?gcode=TOY-RBT-1157&page=top%2Fsearch%2Flist%3Fs_keywords%3Dvf-1s%24pagemax%3D100%24getcnt%3D0%24pagecnt%3D1). It's not the DYRL version, but still really nice.


Is this better? This is takatoku -
http://otca.com.au/boards/showpost.php?p=279557&postcount=8

Yeah, that's a vintage 1/55 in pretty good condition. Similar to the BANDAI Transformers G1 Jetfire.

[Tober]

YF-29 pre-orders are up.

Anime-export (http://www.anime-export.com/product/8154): 13,600 yen

Amiami (http://www.amiami.com/top/detail/detail?scode=TOY-RBT-2257): 12,320 yen. (Sold out in about 10 mins, might re-open)

[VGMStudios]

It looks exactly the same as the one I just bought! :confused:
Im guessing the articulation was improved upon or something??

Edit: never mind.. I was getting mixing up the YF-29 with the VF-4G for some reason. LOL! :rolleyes:

VGM out...

[STL]

YF-29 pre-orders are up.

Anime-export (http://www.anime-export.com/product/8154): 13,600 yen

Amiami (http://www.amiami.com/top/detail/detail?scode=TOY-RBT-2257): 12,320 yen. (Sold out in about 10 mins, might re-open)

Hot damn. Both sold out. Already. Whoa. :(

Thanks though.

[Tober]

And so I emailed HLJ about the DX YF-29:



Hi HLJ,

Could you tell me what is happening with the BANDAI DX YF-29 ( Code: BAN968698 ) reissue for May 2012? It appeared to go from 'discontinued' to 'order stop' without actually opening up again.

Thanks,

Xxxxx Xxxxxx

Hi,

Thank you for writing in.

The item went from discontinued to order stop because we initially thought that we would not be able to get any more stock of the item. We are now exploring the possibility of getting more stock, hence the change to order stop status. Once we know exactly how much stock we can get, the item may be reopened for ordering.

Thank you for shopping at HobbyLink Japan! We appreciate your business!

Best Regards,

Xxxxx Xxxxxx
HobbyLink Japan
www.hlj.com

[Lord_Zed]

Got my 1/60 Ozama VF25 last week.

Going back a few months here to Tober's post.




The BANDAI 1/60 DX line is awesome!*


Yes, yes it is!

Very impressed, while I didn't mind the original version the old Alto at least has a neck, this new renewal version is so much better, far more refined. much nicer sculpt, tighter joints in some places, all improvements. Along with the 27 Bandai have now proven to me they can make Valkyries that can equal Yamato's. So I sure hope they give us the VF117.

The blurry photo below has a comparison, from left to right, old/new/cat.:p

http://i221.photobucket.com/albums/dd31/zedkaiser/IMG_0510.jpg

[Tober]

Yeah, and I'm not feeling ripped-off that I'm buying a repaint because they are so solid. :D

HLJ as just opened orders for the YF-29 restock (http://www.hlj.com/product/BAN968698) too. No word on weather the loose joint syndrome was addressed (I highly doubt it).

[Lord_Zed]

It does seem pretty solid. Does the gerwalk lock actually work though? The arm on mine doesn't seem to want to lock in place, the hole it tabs into has teeth suggesting they are meant for future super pack or armour upgrades rather than locking in.

While I'm reluctant to replace any of my older 25's at this time, I'm definately keen for Luca's 25, and Alto's 25 Tornado if they remake it.



Yeah, and I'm not feeling ripped-off that I'm buying a repaint because they are so solid. :D

HLJ as just opened orders for the YF-29 restock (http://www.hlj.com/product/BAN968698) too. No word on weather the loose joint syndrome was addressed (I highly doubt it).

29 gone already.

[Tober]

Yamato 1/60 FAST packs for the VF-17:

http://i273.photobucket.com/albums/jj230/AUST_Tober/6829488347_13fc7df6bd.jpg

http://i273.photobucket.com/albums/jj230/AUST_Tober/ve3dvn.jpg




Color pic of the upcoming Hasegawa YF-19 Egg plane kit.

http://i273.photobucket.com/albums/jj230/AUST_Tober/th_TOY-RBT-2199-1.jpg (http://s273.photobucket.com/albums/jj230/AUST_Tober/?action=view&current=TOY-RBT-2199-1.jpg)


A bunch of nice Wonderfest(?) kits from Metal Box.

http://i273.photobucket.com/albums/jj230/AUST_Tober/Metalbox_Macross.jpg

As much as I would like them, they are far too expensive. They would work out to about $200 each including proxy services and shipping. And go on sale in a few days.


Hasegawa 1/72 VF-11B Nothung 2 from Macross: The Ride.

http://i273.photobucket.com/albums/jj230/AUST_Tober/65797.jpg

[Tober]

Yamato displays at Wonderfest:

http://i273.photobucket.com/albums/jj230/AUST_Tober/YamatoWF2012.jpg

Screen cap taken from the MW Toy Scoop thread, here (http://www.macrossworld.com/mwf/index.php?showtopic=28836&view=findpost&p=956606) if you want to see bigger pics.

[Raptormesh]

Gonna grab a bunch of those Nothung kits. It's great that they're releasing M:tR valks. The -17 FP isn't doing it for me somehow.

[Tober]

BANDAI 1/60 DX VF-171EX from Macross Frontier.

Release Date: June 2012
Retail Price: 14,000 JPY

I'm guessing the super parts will be exclusive as they're not in the pics.

http://i273.photobucket.com/albums/jj230/AUST_Tober/header.jpg

http://i273.photobucket.com/albums/jj230/AUST_Tober/sam_01.jpg

[VGMStudios]

Really like this one. Love the Plane mode.
Gonna preorder it when it beomes avaliable!

[Tober]

Preorders for the VF-171EX just went up at Anime Export. Sold out almost instantly everywhere else. So if you want one try NOW (http://www.anime-export.com/product/8512)!

[kurdt_the_goat]

Looks to me like the Frontier valks are much, much more popular than the stuff Yamato is releasing from M7! It looks good but until i see reviews i don't think i'll be convinced to get it since the VF-17 is so similar.

[VGMStudios]

Preorders for the VF-171EX just went up at Anime Export. Sold out almost instantly everywhere else. So if you want one try NOW (http://www.anime-export.com/product/8512)!

Sold out! :(
the only place I was able to find that still has them is ishop2go.com but they want a lot more then everyone else. SO I had no choice but to get it there. :(

VGM out...

[Lord_Zed]

Totally missed out having not checked the boards for a few days, unprecedentedly lame!

They better release one in cannon fodder colours, (which I'd prefer anyway).

Hopefully this should prove to Bandai there's money to be made releasing more of these.

[Lord_Zed]

Sold out! :(
the only place I was able to find that still has them is ishop2go.com but they want a lot more then everyone else. SO I had no choice but to get it there. :(

VGM out...

Bah I'm so weak and annoyed by this! I did the same. :(

[Tober]

Yeah, there's been a lot of anger over the limited numbers. I really hope this doesn't become a trend that spreads into other toy lines... :mad:

Strange that none of the HK online stores have listings yet... :confused:

[Tober]

Yamato 1/60 VF-1D with option parts is up for pre-order at Amiami (http://www.amiami.com/top/detail/detail?gcode=TOY-RBT-2289&page=top%2Fsearch%2Flist%3Fs_keywords%3D1%2F60+vf-1d%24pagemax%3D100%24getcnt%3D0%24pagecnt%3D1).


Looks to me like the Frontier valks are much, much more popular than the stuff Yamato is releasing from M7! It looks good but until i see reviews i don't think i'll be convinced to get it since the VF-17 is so similar.

Seems more like the stores getting extremely limited stock of the VF-171EX. The VF-17 appears to have sold well with a restock coming later this month.

[Tober]

HLJ pre-orders for the VF-171EX (http://www.hlj.com/product/BAN975641) are open "again"...

[VGMStudios]

HLJ pre-orders for the VF-171EX (http://www.hlj.com/product/BAN975641) are open "again"...

aaand closed again.. LOL!
my they go fast!

VGM out...

[Lord_Zed]

aaand closed again.. LOL!
my they go fast!

VGM out...



I ordered one, so I may end up with two if anyone missed out.

[Tober]

BANDAI 1/60 DX VF-25G Michael Blanc Custom Messiah Valkyrie v.2.0 has been announced.

http://i273.photobucket.com/albums/jj230/AUST_Tober/Image667.jpg

[Tober]

Yamato 1/60 VF-4G prototype:

http://i273.photobucket.com/albums/jj230/AUST_Tober/YYnZm.jpg

[Raptormesh]

Yamato 1/60 VF-4G prototype:

http://i273.photobucket.com/albums/jj230/AUST_Tober/YYnZm.jpg

My wallet just filed for separation...

[Slag]

^ hehehehe ^

[VGMStudios]

fina;;y got my super parts for vf-25f
my they are nice!!!

anyone else get thiers?

[Lord_Zed]

Yup, they are definitely an improvement of the old ones, though I still noticed they have lesser forms of the old issues in that the intake armour parts still fall of in Battaroid mode and the backpack is just a little to heavy for the connection between the fuselage and the hips.

Not a huge fan of the way the missile doors work either, but it's not a big issue.

Other than that It's all good much better details and less cheap looking, looks much better in fighter mode especially the armour parts have no gaps between them behind the cockpit so giving a much more intimidating look.

[Tober]

BANDAI DX 1/60 VF-25G:

http://i273.photobucket.com/albums/jj230/AUST_Tober/vf-25g.jpg

[Trent]

Uber cool. How much does that set you back??

[Tober]

Uber cool. How much does that set you back??

14,000jpy or about $200.

[Tober]

Upcoming 1/60 kits from Yamato and MEF (the guys that did the Regult and Destroids).

Check out the two silhouettes... :)

http://i273.photobucket.com/albums/jj230/AUST_Tober/01-1.jpg

[Slag]

BANDAI DX 1/60 VF-25G:

http://i273.photobucket.com/albums/jj230/AUST_Tober/vf-25g.jpg

super sleek.. looks like it's going fast even when it's standing still..
like the gun too.

[Slag]

got these. . well one of the is macross:o
these orguss toys are pretty orsome too though

[VGMStudios]

14,000jpy or about $200.

Where did you get that?
Also could you take a pic of the box? I can't seem to find a picture of it anywhere.

Vgm out...

[Tober]

Where did you get that?
Also could you take a pic of the box? I can't seem to find a picture of it anywhere.

Vgm out...

http://tamashii.jp/item/item.php?eid=01786&pref=301

It hasn't been released yet, pre-order is imminent and expected to be as short-lived as the YF-29 and VF-171.

[Tober]

got these. . well one of the is macross:o
these orguss toys are pretty orsome too though

Nice! I've had my eye on that Orguss mech too. Never saw the series tho.

[VGMStudios]

http://tamashii.jp/item/item.php?eid=01786&pref=301

It hasn't been released yet, pre-order is imminent and expected to be as short-lived as the YF-29 and VF-171.

Tell me about it. I try to preorder it today and everyone was sold out this morning. What do people do, sit at their PC and keep refreshing every 2 freaking second after midnight? Ya bunch of geeks. Lol.
Anyways after 1hr and a half of searching I was able to find a place that still had some. Kinda pisses me off how fast these things go, but it's the nature of it.

Thankfully I was able to find and preorder that soc megazord easily. :-)

Vgm out...

[jazzcomp]

got these. . well one of the is macross:o
these orguss toys are pretty orsome too though
How much was the battroid?

[Slag]

How much was the battroid?

i think it was around the 75 mark. it's a bit yellowed but not as bad as it looks cause the window is yellowed too.

[Tober]

Bandai 1/60 Super Pack for the DX VF-171EX. Release at the end of September.

http://i273.photobucket.com/albums/jj230/AUST_Tober/480049_4287110339575_10497420_n.jpg


Latest pics of the Yamato 1/60 VF-4G showing full battroid and gerwalk modes.

http://i273.photobucket.com/albums/jj230/AUST_Tober/7EJXaGi42iDXZe_HuJE3Wg.jpg

[kurdt_the_goat]

I wonder how the Bandai 171 will compare with Yamato's 17. I still haven't played with mine, 2 months until i pick up from inlaws in Japan (along with my Ozma 25!).

On a side note, i'm selling my VF-19 Master File for $40 if anyone's interested, see my sales thread for pics. (http://otca.com.au/boards/showthread.php?t=8700)

[Lord_Zed]

Bandai 1/60 Super Pack for the DX VF-171EX. Release at the end of September.

http://i273.photobucket.com/albums/jj230/AUST_Tober/480049_4287110339575_10497420_n.jpg


Latest pics of the Yamato 1/60 VF-4G showing full battroid and gerwalk modes.

http://i273.photobucket.com/albums/jj230/AUST_Tober/7EJXaGi42iDXZe_HuJE3Wg.jpg

I quite like the standard Emerald and Diamond force Yamato Valks too.

[TheFallen]

It has been a long time nice I considered Macross toys so I thought I would try again.

I bought a couple 1/100's and I didn't really like them. What is the best scale to get in to that doesn't have a lot of parts forming, has nice articulation and is based on the VF-1's?

I guess the best way to put it is, I want a Robotech transformer with a nice alt mode and a nice robot mode. Any suggestions?

[Tober]

It has been a long time nice I considered Macross toys so I thought I would try again.

I bought a couple 1/100's and I didn't really like them. What is the best scale to get in to that doesn't have a lot of parts forming, has nice articulation and is based on the VF-1's?

I guess the best way to put it is, I want a Robotech transformer with a nice alt mode and a nice robot mode. Any suggestions?

HLJ currently has a sale (http://www.hlj.com/scripts/hljlist?SaleGroup=120624_Macross&header=macrosssale0612&DisplayMode=images&Dis=2&Sort=std&qid=499D6MHTEXY&set=1&Scale2=60&z=Scale2&KeyWord=vf-1&c=c&x=0&y=0) on some of the less popular Yamato 1/60 VF-1 schemes - which ends tomorrow. Otherwise I'd recommend the latest release 'option parts' releases (http://www.hlj.com/scripts/hljlist?Word=vf-1%20option%20parts&DisplayMode=images&Dis=2&Sort=std&qid=TBE1RBXF1VJA&set=1&q=1&Maker2=YMT) if you want a hero color-scheme. Although remember to avoid the white 'Unpainted Assembly Kit' as you need to paint and assemble them yourself - they aren't easy.

There is also the 1/48 scale if you're after something larger, but they are now harder to find.

[TheFallen]

Thanks for that Tober. As I went through the checkout hlj went in to maintenance so I couldn't complete my order.

Can you tell me what the difference is between 1/60 VF-1S TV Ver. Transformable with Option Parts (http://www.hlj.com/product/ymt00228) and 1/60 VF-1S Valkyrie Roy Fokker with Option Parts (http://www.hlj.com/product/YMT00232)?

I have looked through this thread and seen some fantastic looking jets/mecha. How do you choose what you want to collect? Do you just buy what looks good or do you follow a certain company?

There is no "one line" for these is there? Are they all different lines from different scales from different companies? I might be interested to get some more but I don't know where to start. I just want some good, transformable jets

[Tober]

Thanks for that Tober. As I went through the checkout hlj went in to maintenance so I couldn't complete my order.

Can you tell me what the difference is between 1/60 VF-1S TV Ver. Transformable with Option Parts (http://www.hlj.com/product/ymt00228) and 1/60 VF-1S Valkyrie Roy Fokker with Option Parts (http://www.hlj.com/product/YMT00232)?

I have looked through this thread and seen some fantastic looking jets/mecha. How do you choose what you want to collect? Do you just buy what looks good or do you follow a certain company?

There is no "one line" for these is there? Are they all different lines from different scales from different companies? I might be interested to get some more but I don't know where to start. I just want some good, transformable jets

The TV version is a brighter white than the off-white of the DYRL (movie) Valks. There are some small detail differences as well such as the arrows on the side of the head being black instead of yellow. The Roy figure is the TV grey/blue as opposed to the DYRL white/yellow. If you find the TV Super Parts set then it comes with Hilaru (Rick) instead of Roy.

It's up to each collector what they want to get. However given that the prices of the more recent high-end larger Valks go around $200 to $300 are selective. Personally, I tend to buy my favorite scheme of each mold. Others buy hero Valks or complete different series.

I'd advise staying away from eBay or more obscure online stores, as people want to sell their older Valks there, some of the older ones having severe design flaws or being later inferior obsolete versions. Avoid the initial Macross Frontier VF-25 Bandai DX line, unless you see the word 'Renewal' in the title.

The 1/60 scale is basically the standard now. Bandai's latest DX offerings are also 1/60 even if they don't explicitly say so.

[TheFallen]

When you say TV Super Parts is that the Fast Pack?

Is there are fast pack that can go on to the 1/60 VF-1S TV Ver.? Is that the TV Super Part set?

Man, this is confusing as hell :)

[Tober]

Yes, Super Parts are FAST packs.

Maybe take a look here (http://eyeforthings.wordpress.com/tag/vf-1s/), cos there are pics. I don't think the TV FAST packs were sold separately, but the bundle set is sold out everywhere anyway. I would expect a re-release, but I don't know when.

There are a few different FAST pack sets depending on the series. The TV version are a blueish hue whereas the DYRL packs can include the strike cannon as well, and are a greenish color.

[TheFallen]

Thanks again for your help, Tober.

One last question (for now) is this worth getting; 1/60 VF-1A (http://www.hlj.com/product/YMT00094)? It is cheap and I thought it might be a nice introduction but if it is no good I might just spend the money on the VF-1S that you mentioned.

Thanks

[Tober]

The 1A has the more squarish head design with the single laser. That Valk is from the beginning of DYRL, piloted by Hikaru (Rick). Pic here (http://www.1999.co.jp/eng/image/10074568a/20/2). It doesn't come with the option parts, if they interest you.

[TheFallen]

Thanks again.

I might just get the VF-1S with Option Parts and hope for a Super pack

[Lord_Zed]

Anyone miss out on the DX VF-171EX Nightmare?

HLJ just charged me for it, which means I may end up with two as I ordered another one from a less reputable seller earlier.

Nothing is guaranteed yet but if anyone might be interested PM me.

[TheFallen]

Thanks again.

I might just get the VF-1S with Option Parts and hope for a Super pack

And that is exactly what I did.

Now, after going through this thread, I want a VF-25. Is there any chance that Yamato can get the license to make those?

[jazzcomp]

where did you get the vf-1s?

[TheFallen]

where did you get the vf-1s?

1/60 VF-1S TV Ver. Transformable with Optional Parts (http://www.hlj.com/product/YMT00228)

Thanks to Tober for the heads up

[Tober]

And that is exactly what I did.

Now, after going through this thread, I want a VF-25. Is there any chance that Yamato can get the license to make those?

You can't go too wrong with Fokker. :)

Bandai sponsored the Frontier series and Movies, thus they have first dibbs on the license renewal. It was 15 years until they gave the Macross 7 license away, although only about 5 for Macross Plus, so who knows? But it won't be any time soon. The renewal 25s are also extremely difficult to get at a reasonable price.

[TheFallen]

You can't go too wrong with Fokker. :)

Bandai sponsored the Frontier series and Movies, thus they have first dibbs on the license renewal. It was 15 years until they gave the Macross 7 license away, although only about 5 for Macross Plus, so who knows? But it won't be any time soon. The renewal 25s are also extremely difficult to get at a reasonable price.

I am a sucker for the Fokker :)

That is what I noticed with the VF-25 renewal, they go for crazy prices and even the fast packs are pretty pricey.

I have been looking around at some pictures and I am pretty impressed with a lot of the fighter designs. I only really knew of the VF-1's because I am not a fan of Japanese language anime so I haven't really seen anything that doesn't have an English dub.

My favourite fighter is probably always going to be the VF-1S strictly due to nostalgia but I am really liking the VF-25 design as well as the VF-171. I have been reading some horror stories about the availability of the Bandai fighters which is why I wanted to know if Yamato would ever get the Frontier license.

I guess for now all I need to worry about is remaining hopeful for some fast packs to go with my VF-1S.

[VGMStudios]

Ishop2 nothing or whatever its called sent me an email stating my preorder for the DX Chogokin VF-171EX Messiah Valkyrie Alto Custom will not be fulfilled. So now I'm out.
Would anyone here know where I could get it. This rather makes me angry.
Thanks.

[Lord_Zed]

Ishop2 nothing or whatever its called sent me an email stating my preorder for the DX Chogokin VF-171EX Messiah Valkyrie Alto Custom will not be fulfilled. So now I'm out.
Would anyone here know where I could get it. This rather makes me angry.
Thanks.

That's disappointing.

I have an order with Ishop2go too, they still haven't got back to me. However IF they do actually send mine I should be able to sell you the one they send as I sourced another one just in case.

I'm not to confident about them delivering though, but if they do.......

If they don't send me an email in the next few days I'll send one to find out what is going on.

[VGMStudios]

Thanks lord zed. as I said in the pm I'll wait for your reply. If it turns up empty I'll try looking on YAJ.
Thanks again.

[Dkaris]

Is it still possible to pick up an elintseeker? I regret not getting one a few years ago >_>

[Tober]

Apparently ishoptogo sent out an email stating that they only received 10 of the 300 they ordered...

Nippon Yassan (http://www.nippon-yasan.com/lang-en/macross/1688-dx-chogokin-macross-f-frontier-vf-171ex-nightmare-plus-ex-saotome-alto-custom.html) are about the only option left (don't choose SAL without registration). After that, it's the auction sites.

[Tober]

Is it still possible to pick up an elintseeker? I regret not getting one a few years ago >_>

Sold out ages ago, along with the Super Ostrich. They might reissue them with the option parts tho.

[VGMStudios]

Apparently ishoptogo sent out an email stating that they only received 10 of the 300 they ordered...

Nippon Yassan (http://www.nippon-yasan.com/lang-en/macross/1688-dx-chogokin-macross-f-frontier-vf-171ex-nightmare-plus-ex-saotome-alto-custom.html) are about the only option left (don't choose SAL without registration). After that, it's the auction sites.

Thanks for the link. I ended up getting it from,YJA for close to actual cost.
So don't worry about me lord zed. Thank you though. :-)

[Tober]

http://i273.photobucket.com/albums/jj230/AUST_Tober/preorder-VF-4.jpg

Yamato updated their VF-4G posts with the announcement that if you order one through their web-shop before July 30th you will receive a 5% discount, or 10% if you are a Yamato Fan Club member. Price is still unannounced and orders are non-binding.

[TheFallen]

As a new fan of Robotech/Macross I have never seen the VF-4 before so I am not sold on it yet. I might wait for a re-release of the YF-19 because I prefer the way it looks compared to the VF-4.

[Dkaris]

Does anyone know where to pick up spare heads for the yamato valks? My focker 1S took a fall from my cabinet =[

[Tober]

Does anyone know where to pick up spare heads for the yamato valks? My focker 1S took a fall from my cabinet =[

The HLJ Parts service (http://www.hlj.com/helpcenter/parts.html) is probably your best bet, but I wouldn't get your hopes up.


Semi-relevant:




Note from Amiami:


"Unfortunately we are unable to provide a replacement or replacement parts for the item as makers do not provide support for overseas customers, and they will only provide support for end-users (not retail stores).

At this time, we can only provide you with a refund of the merchandise price provided you send the item back to us and pay for the return shipping. (The refund would be processed after receipt of the item.) Also, to be honest, Yamato figures are not the best quality considering their price and in the future we will be unable to order figures produced by Yamato. We apologize for the inconvenience."

[Tober]

BANDAI DX YF-29 30 Anniversary "VF-1S Scheme"

http://i273.photobucket.com/albums/jj230/AUST_Tober/item_info10181500000004.jpg

Good luck trying to get one...

[Trent]

I'd have one of those.

Its looks awesome

[Raptormesh]

I'd have one of those.

Its looks awesome

Did anyone manage to snag one at MSRP or lower?

[Tober]

Did anyone manage to snag one at MSRP or lower?

Yep. :)

Blink and you miss the international orders tho... :eek:

[Raptormesh]

Yep. :)

Blink and you miss the international orders tho... :eek:

Lucky you, the ones at ami ami sold out in minutes...now looking for alternatives but don't really have time to sit around the whole day waiting for the thing to pop up.:(

[VGMStudios]

I got my vf-171ex today but something is bothering me about it. He is not as white as the vf-25f. He has more of a yellow tint to it so I was wondering if someone who has both could take a pic of them side by side please. Want to verify if mine is a dud. I've seem non production shots and they look, like its suppose to be pure white, not this yellow tint like its been sun damaged.

Not really happy.

Vgm out...

[Tober]

I got my vf-171ex today but something is bothering me about it. He is not as white as the vf-25f. He has more of a yellow tint to it so I was wondering if someone who has both could take a pic of them side by side please. Want to verify if mine is a dud. I've seem non production shots and they look, like its suppose to be pure white, not this yellow tint like its been sun damaged.

Not really happy.

Vgm out...

Mine has a slightly off-white tint to it compared to the VF-25F. I didn't notice it until you mentioned it.

[VGMStudios]

Ahh ok. Makes me feel better knowing that mine isn't a dud or something. So its suppose to be like that. Weird. Wish it was pure white like the rest of them.

[Trent]

Lucky you, the ones at ami ami sold out in minutes...now looking for alternatives but don't really have time to sit around the whole day waiting for the thing to pop up.:(

Any suggestions on where I could grab myself one of these? Not really a huge macross collector but am really digging this color scheme.

[TheFallen]

I got my first 1/60 today, the VF-1S. It is actually a little smaller than I thought. I am going to have a mess around with it on the weekend and maybe take some pictures.

[Trent]

Yep. :)

Blink and you miss the international orders tho... :eek:

It appears that Nippon Yasan have a few left. Anyone ordered from them before? Any good???

[Raptormesh]

It appears that Nippon Yasan have a few left. Anyone ordered from them before? Any good???

Folks from mworld seems to say alright things about NY. It's 300 before shipping though...:(

[Tober]

Yeah, so far Nippon Yassan has been getting a lot of good press, although it's suspected that they have been purchasing stock from other retailers and reselling it to meet demand, as far as the Bandai Valks go. Thus the reason that they appear to have a much larger allocation and their prices keep rising...

[Raptormesh]

Indeed, that seems to be their modus operandi. I've never purchased a valk for more than $200 shipped and I won't start now. Unfortunately this also means Yamato has priced their new valks way above my hard ceiling and Bandai's are a real P.I.T.A to snatch at MSRP or less.

The hunt continues!

[Trent]

Definately expensive, but still cheaper than eBay. And I don't think these will be getting any cheaper.

[Raptormesh]

VF-19P is now up for preorder (amiami) (http://www.amiami.com/top/detail/detail?gcode=TOY-RBT-2576&page=top).

I like the head and the mech but not a fan of Basara so I'll pass.

[Raptormesh]

The VF-4G is now up for preorder at Nippon Yasan or LocusHK for about $400 including EMS shipping.

[Tober]

The VF-4G is now up for preorder at Nippon Yasan or LocusHK for about $400 including EMS shipping.

So you're ordering one?

I was going to get two, but that color scheme is so dull, hopefully they will release a customisable version later.

[Raptormesh]

So you're ordering one?

I was going to get two, but that color scheme is so dull, hopefully they will release a customisable version later.

Yeah I'm picking one up, though I actually prefer the low-visibility markings. It's a huge amount...but if something important comes up I might cancel the pre-order.

[VGMStudios]

Same here. I pre-ordered the thing. It is a huge amount. I may cancel it if something comes up.

[Lord_Zed]

Where did you preorder it? I want it but I'm not sure I can justify the price ATM. need somewhere where I can cancel if it becomes an issue.

I did make a point of ordering armour for my VF 171EX though.

[Tober]

Where did you preorder it? I want it but I'm not sure I can justify the price ATM. need somewhere where I can cancel if it becomes an issue.

I did make a point of ordering armour for my VF 171EX though.

Nippon Yasan (http://www.nippon-yasan.com/lang-en/macross/3606-choujikuu-yousai-macross-vf-4g-lightning-iii-limited-edition.html) is where almost everyone is ordering from currently. They accept payment upfront or they sent you an invoice asking forpayment three weeks before they expect to ship, so you can pay with only a few days before release (late December).

It's about the cheapest price you will find... I'm not even entirely sure how they're doing it, $340 is the Yamato web-shop price.

[kurdt_the_goat]

Got to spend a bit of time with my 1/60 VF-17S and VF-25Sv2 since getting back from Japan.

The 17S didn't initially grab me as much as i hoped, after being so pleased with Basara's VF-19 last year. The transform is nice but the fighter mode is pretty finicky with those little tabs to the side of the intakes! It seems the leg rotation at the hip plays into it a lot but mine seems to be a couple mm off, which on such an otherwise awesome piece, is a little distracting. I recently stickered it up though..... I hate how the stickers have transparent edges that are more apparent on dark backgrounds, so i actually re-cut every single one for a finer look, and it makes such a huge difference, i love the thing now! The black matte works so nicely with white and yellow decals...i'll try take some pics when i get a chance.

I said to myself this was it for Macross toys, cause they're getting so pricey, but i'm starting to wish i nabbed a VF-4G now, Yamato is totally on a roll!

I think i can live without it, but i'd rather a VF-11C to complete my M7 moulds. Unfortunately i couldn't find a single one in Japan :(

The 25Sv2, my first Bandai toy is also pretty impressive. It's immediately obvious why it costs much less - the plastic quality is more "Transformer" than high end - plastic swirls all over the place. But the abundance of tampo prints makes it look very pretty regardless! My pet peeve is all the pieces that have a tendency to fall off. I understand they're there to facilitate the extra parts but it's still frustrating! One of my intake covers just does not want to stay in place either. Battroid mode is very nice, i hope my joints hold up! It's impressive that they squeezed waist rotation in there, but is it just me or does the chest cavity not lock in place particularly well?

[Tober]

I said to myself this was it for Macross toys, cause they're getting so pricey, but i'm starting to wish i nabbed a VF-4G now, Yamato is totally on a roll!

The 25Sv2, .... Battroid mode is very nice, i hope my joints hold up! It's impressive that they squeezed waist rotation in there, but is it just me or does the chest cavity not lock in place particularly well?

Maybe post a pic of what is wrong with the VF-17S's alignment, it should be solid. Maybe there is a back tab you're not extending..? :confused: I don't have a VF-17 but I did get to handle one and I don't remember any alignment issues... Sharp corners and edges I do remember tho. :eek:

The VF-4G is available for pre-order from a few stores. Doesn't stop it being around $400 shipped tho. :eek: :eek: :eek: :eek:

Loosening of the joints on the renewals is inevitable. It's a design flaw. :( The chest cavity not locking could be to do with the option of posing the battroid with the abdomen straight or pushed forward - either should lock tho.

[kurdt_the_goat]

I could still get a VF-4G to my inlaws from Yamato direct but even 26,985Y is pushing it IMO.... could still get an SDF-1 for a bit more than that!

Maybe i'm not explaining the chest cavity thing properly. It locks in place in the 2 positions as you say, but the upper part just in front of the head doesn't seem to clip down? I'll try take some pics, same with the VF-17; i'm just referring to the swivel piece that ends up beside the intakes in battroid mode. A slight misalignment of the hips in fighter mode causes it to pop out of place and dangle down if i'm not careful.

[Tober]

I could still get a VF-4G to my inlaws from Yamato direct but even 26,985Y is pushing it IMO.... could still get an SDF-1 for a bit more than that!

Maybe i'm not explaining the chest cavity thing properly. It locks in place in the 2 positions as you say, but the upper part just in front of the head doesn't seem to clip down? I'll try take some pics, same with the VF-17; i'm just referring to the swivel piece that ends up beside the intakes in battroid mode. A slight misalignment of the hips in fighter mode causes it to pop out of place and dangle down if i'm not careful.

You could get a SDF-1 for a bit less than that too, now (http://www.hlj.com/product/YMT00211).

I'll take a look at the renewal chest tonight. I think that it's the neck-to-cockpit that locks instead of the chest, which secures it in place...

[kurdt_the_goat]

The display space is the killer for that idea :)

I forgot to mention, i thought you guy's would get a kick out of this:
On my trip to Japan i visited 2 separate random hobby stores that were rocking out the Macross 7 soundtrack!
What's better is my wife recognized just as I did - I have successfully brainwashed her!

[kurdt_the_goat]

Haven't had some good light for nice photos of my 1/60 17S :(

In other news, i've decided i need that VF-4G after all.
Unfortunately i still have to convince my wife!
So i've listed some new stuff for sale, including some Macross items:
Bandai 1995 VF-17D MIB & Revoltech VF-1J Limited Max colour (http://otca.com.au/boards/showthread.php?t=8700&page=4). HELP! :)

[kurdt_the_goat]

Nicest pic i could get, damn this thing is hard to photo well! Doesn't really show off the decals well i'm afraid. Click to enlarge

http://i.imgur.com/eTAj6l.jpg (http://i.imgur.com/eTAj6.jpg)

Also pic of the bit that looks slightly misaligned, and the bit that likes to pop out. Seems the popping out bit is mostly because of the shoulder panels, if you push them so they're flush on top, that panel pops down. I get the feeling the shoulder panels aren't supposed to be flush on top now though?... not sure.

http://i.imgur.com/pKCUHl.jpg (http://i.imgur.com/pKCUH.jpg)

In other news, I have procured the funds for a VF-4G!!!
I'm somewhat torn between it and instead finally getting a VF-11C off Ebay or something... though i'm starting to think i just wasn't meant to have a VF-11C after such a long time thinking about it.... the 4G just looks way cooler!
That said, what do you guys think i should get?

[Lord_Zed]

The correct answer is both.:D

However given the fervor for the limited runs of Macross Frontier toys of late it seems likely the VF - 4G will likely rise swiftly in the aftermarket, so It might be best to get it while the chance is there.

That said I do really like the VF - 11C, I like the design and it has one of the most enjoyable and least frustrating transformations of all Yamato Valks.

[kurdt_the_goat]

Yeah 4G is tipping the scales after much drooling over proto pictures today :P

I was just poking around Macross mecha manual though and noticed the there's a VF-X colour scheme VF-11 (http://www.macross2.net/m3/macrossga/vf-11b-vfx2.htm) too.
Maybe they'll actually release this down the line, if the 4G is opening the doors. I think it could pass as a M7 custom in my collection!

http://i.imgur.com/8ZG8F.gif

[kurdt_the_goat]

Major sale over at HLJ! (http://www.hlj.com/scripts/hljlist?SaleGroup=120920_YMT&header=yamasal0912&utm_source=HobbyLink+Japan+Newsletter&utm_campaign=c412e8f801-Yamato_9_20_2012&utm_medium=email)

VF-17S - 14,880
VF-1A Production Type TV Ver (plus heaps of other varients) - 4,410
VF-19 Fire, Emerald - 13,200
SF1 unpainted kit - 11,850

[Tober]

BANDAI 1/60 DX RVF-25 Renewal Version and VF-171

http://i273.photobucket.com/albums/jj230/AUST_Tober/tu7Fr.jpg

and Bandai S.H. Monsterarts Vajra

http://i273.photobucket.com/albums/jj230/AUST_Tober/AstjL.jpg

[Lord_Zed]

I new Bandai would do this eventually. The regular VF-171 has always been the Frontier toy I really want.

And that Varja looks really nice to.

[seespotrun]

Wow, this market is brutal. Figures sold out one month after release; confusing designations; and a million versions of the VF-1 (http://anymoon.com/blog/wp-content/uploads/2011/08/Yamato-V2-Table-1A.jpg). Makes you wish for a tfwiki-style guide to Macross toys.

Still, I wish Takara/Hasbro would take some cues from Bandai/Yamato when it comes to designing sleek jetformers. Compare the VF-4G Lightning III (http://www.collectiondx.com/news_item/81712/vf4g_lightning_iii_final_pictures_and_price) to ROTF robot-under-plane Jetfire (http://tfwiki.net/wiki/Jetfire_%28ROTF%29#Leader_Class_toys). The YF-29 Durandal (http://www.toyark.com/news/macross-toy-news-51/dx-yf29-durandal-30th-anniversary-color-6112/#images)'s underside profile puts all the Transformers masterpieces to shame (and so too does the price, sadly).

[Tober]

There's anymoon (http://www.anymoon.com/blog/) for reviews and categories. It is rather confusing tho.

[kurdt_the_goat]

For Yamato's side of things you can also check their product listing here (http://www.yamato-toys.com/items/index.php?ca[]=0023&ls=0023&ca[]=0033) which is in announced order i think, albeit in Japanese.

I was fretting Tober's post was gonna be about a delay to the VF-4G, but thankfully not! I have mine coming with MP Soundwave (and was going to get them sent in January anyway, to avoid christmas mail blunders), so i hope it makes the original date still!

[seespotrun]

Thanks for the pointers, guys. That helps in picking out a VF-1S (just go with the latest release or two).



I was fretting Tober's post was gonna be about a delay to the VF-4G, but thankfully not! I have mine coming with MP Soundwave (and was going to get them sent in January anyway, to avoid christmas mail blunders), so i hope it makes the original date still!

I'm so jealous. The VF-4G looks quite sweet, but it's going for over $400 now, which is 80% of the way towards a TFC Hercules. I'm still hopeful that the limited release means Yamato will later release the mould in OVA colours with wider availability so that us mere mortals can possess it too.

[Tober]

Thanks for the pointers, guys. That helps in picking out a VF-1S (just go with the latest release or two).

If you're just starting out, rule of thumb is to stay away from eBay - that's where people will try to offload lemons or scalp at ridiculous mark-ups.

It doesn't help that we get revisions every few years either. Yamato is expected to announce the Ver 2 of the 1/60 YF-19 soon.


I'm so jealous. The VF-4G looks quite sweet, but it's going for over $400 now, which is 80% of the way towards a TFC Hercules. I'm still hopeful that the limited release means Yamato will later release the mould in OVA colours with wider availability so that us mere mortals can possess it too.

As far as Yamato goes we only get one new mold a year currently, with plenty of warning. So I find it easier to save and justify the cost. Bandai released the VF-171 mold this year, the Renewal VF-25 mold at the end of last year, the YF-29 mid 2011. So it's mostly slight remolds/repaints and add-on packs - if you can order them.

I wouldn't get your hopes up for the Flashback 2012 VF-4. Yamato don't have the license, apparently.

[seespotrun]

Finally got this bad boy delivered yesterday:

http://i.imgur.com/34bUz.jpg (http://imgur.com/34bUz)

Awesome figure. I chose the YF-29 because the forward-swept wings looked cool, I liked the battroid mode more than the YF-19, and I wasn't a fan of how the swing-wing Macross airplanes look unbalanced without their rear horizontal stabilisers.

The figure does have some issues:

The sizable wings make Battroid mode back-heavy.
The canards end up just behind the hips in battroid mode, limiting hip movement. You move the hips forward as part of the transformation, but it's still a challenge to get him to crouch forward. EDIT: After playing with it some more, I realised I hadn't correctly transformed the hips. When done correctly, they clear the canards so posing is no problem.
The stand would look cooler if it was coloured.


Overall, I love it in all its white-tampoed-on-white glory. :)

http://i.imgur.com/tyIFV.jpg (http://imgur.com/tyIFV)

Now I just have to wait for HLJ to re-stock the VF-1S in Fokker colours so I can have a "then and now" side-by-side.

In other news, HLJ have re-opened orders for the VF-4G Lightning III (http://www.hlj.com/product/YMTGK-19).

[aaron2]

Yamato has updated their development blog with new images and information for their upcoming 1/60 VF4G Lightning III.

[Tober]

And apparently they are re-opening pre-orders as they have extra demand. So the VF-4G is a success! :)

[Raptormesh]

Finally got this bad boy delivered yesterday:

[/URL].

Well done she's a keepr! I love the YF-29 but prefer Alto's as that appeared in the movie and this 25th anni is non canon. If you're new to macross, welcome and hold tight it's going to be an expensive ride but its worth it in the end! Note about getting a VF-1 just make sure it's the latest versions as they have updated hips and non-exploding shoulder joints. :D


And apparently they are re-opening pre-orders as they have extra demand. So the VF-4G is a success! :)

I love the new pics with the black mold. Now I'm pinning for a stealth version!

I've been waiting for the CF-171 but am extremely turned off by bandai's offering at the moment with the 1 minute preorder window. :rolleyes:

[Tober]

Well done she's a keepr! I love the YF-29 but prefer Alto's as that appeared in the movie and this 25th anni is non canon. If you're new to macross, welcome and hold tight it's going to be an expensive ride but its worth it in the end! Note about getting a VF-1 just make sure it's the latest versions as they have updated hips and non-exploding shoulder joints. :D



I love the new pics with the black mold. Now I'm pinning for a stealth version!

I've been waiting for the CF-171 but am extremely turned off by bandai's offering at the moment with the 1 minute preorder window. :rolleyes:

I wonder if Yamato will make the 1/60 YF-19 v.2 compatible with the Bandai Frontier FAST packs...:rolleyes:

I've been able to secure each renewal release at pre-order retail so far. It's been a pain, but not impossible. The VF-171 EX was comparitively easy too.

And here's BANDAI's upcoming 1/72 VF-1 kit:

http://i273.photobucket.com/albums/jj230/AUST_Tober/484993_396268563789858_675343043_n.jpg

Gallery (http://masterfileblog.jp/review/2012/11/29/2552.html).

[Raptormesh]

I wonder if Yamato will make the 1/60 YF-19 v.2 compatible with the Bandai Frontier FAST packs...:rolleyes:

I've been able to secure each renewal release at pre-order retail so far. It's been a pain, but not impossible. The VF-171 EX was comparitively easy too.

And here's BANDAI's upcoming 1/72 VF-1 kit:

http://i273.photobucket.com/albums/jj230/AUST_Tober/484993_396268563789858_675343043_n.jpg

Gallery (http://masterfileblog.jp/review/2012/11/29/2552.html).

You sir must have incredible luck, timing or both. :D

The kit looks really good. Mr. K looks very happy haha.

[seespotrun]

I love the YF-29 but prefer Alto's as that appeared in the movie and this 25th anni is non canon.

I like the non-canon scheme more. Less of a sea of red on the wings. The Alto custom does look quite good in battoroid mode. And then I saw the price on the super parts (http://www.nippon-yasan.com/lang-en/figurines-others/442-diecast-macross-dx-chogokin-macross-yf-29-super-parts-limited.html) :eek:.


If you're new to macross, welcome and hold tight it's going to be an expensive ride but its worth it in the end!

Tell me about it! My two valks so far cost more than most of my masterpiece transformers collection. They're great though, especially my recently-acquired VE-1 Elintseeker. A tight toy (literally; I always struggle to pull out the ankles during transformation). I've always liked giant-radome variants. Can't wait for the RVF-25 renewal version (http://www.toyark.com/news/macross-toy-news-51/dx-vf-171-dx-rvf-25-renewal-ver-and-dx-vf-27-super-parts-6687/). It's the only VF-25 I'm interested in, being different enough from the YF-29 to be worth picking up for me.


Note about getting a VF-1 just make sure it's the latest versions as they have updated hips and non-exploding shoulder joints. :D

Is there a way to tell the latest versions apart from the older variants by just looking at the toy? The main reason I don't have a VF-1S yet is because I haven't found any way of differentiating them in pictures other than the listed release date, which has kept me from looking anywhere other than the main retailers for them (which, of course, are out of stock at the moment).

[Raptormesh]

Is there a way to tell the latest versions apart from the older variants by just looking at the toy? The main reason I don't have a VF-1S yet is because I haven't found any way of differentiating them in pictures other than the listed release date, which has kept me from looking anywhere other than the main retailers for them (which, of course, are out of stock at the moment).

What I'd do now if I'm looking for VF-1s is to email HLJ and ask them about their stock. Alternatively you could also ask around the forums at macrossworld. I wouldn't head to ebay, but that's just me.

[Raptormesh]

Just paid for my VF-4, thank goodness the yen is a bit weaker.

[kurdt_the_goat]

Got my VF-4G shipping notification from Yamato!
Still have to wait until MP Soundwave comes out till they both get shipped to Australia though :(

[kurdt_the_goat]

55 minutes of VF-4G gold from Yamato!

One (http://youtu.be/UkueuWtaAWI)
Two (http://youtu.be/chLXTKCzXDQ)
Three (http://youtu.be/mEqTl5R9Sq8)
Four (http://youtu.be/S5YWpUic5t0)

Gotta say, looks like they've knocked another one out of the park on this release. The meticulous attention to detail and unique transformation shown in these videos make it clear it's worth the money. The solidity of the nosecone into chest transformation is a thing to behold!

The only thing i was a tiny bit disappointed with was the missiles being designed to fall off to avoid breakage. I thought they could have just made them a tiny bit smaller and stuck them in place as a compromise.

That disappointment didn't last long though - later in the videos they show how they weren't willing to compromise even on that tiny detail.
Instead, they're on a sliding mechanism so that if you're careful, it can be transformed without dislodging them. Brilliance!

[Raptormesh]

Indeed i'm pretty stoked for this! The engineering is amazing and it looks so sleek in fighter mode.

[seespotrun]

CollectionDX have posted a review to their YouTube channel: Macross VF-4G Lightning III Toy review (https://www.youtube.com/watch?v=EZjHIbhQVxM). Great looking valk - sleek fighter and jet modes, but transforming it is pretty hairy. Definitely one for the fans.

It's unfortunate its release coincides with the Steam sales, so I'll have to wait a few weeks before I can pay to ship mine from HLJ.

[Raptormesh]

CollectionDX have posted a review to their YouTube channel: Macross VF-4G Lightning III Toy review (https://www.youtube.com/watch?v=EZjHIbhQVxM). Great looking valk - sleek fighter and jet modes, but transforming it is pretty hairy. Definitely one for the fans.

It's unfortunate its release coincides with the Steam sales, so I'll have to wait a few weeks before I can pay to ship mine from HLJ.

Yup awesome guide to transforming it. It's actually one of the easier ones to switch modes :).

[Tober]

BANDAI's 1/60 VF-171 canon fodder scheme is up for pre-order (and selling out) from the usual places.

[seespotrun]

BANDAI's 1/60 VF-171 canon fodder scheme is up for pre-order

Was up for preorder, it seems. Preorders sold out in 5 minutes (http://www.youtube.com/watch?v=0can6BP6CoE).

Looks like the rest of us mere mortals will have to wait for the reissue.

[Tober]

That always happens to Amiami, Hobby Search, Anime Export, CD Japan etc...

Nipon-Yasan (http://www.nippon-yasan.com/lang-en/macross/4449-macross-f-dx-chogokin-vf-171ex-nightmare-plus-ex-regular.html) have it up for pre-order for $180 + shipping.

[seespotrun]

After HLJ decided it couldn't fill my backorder for a VF-1S in Fokker colours, I went to good ol' Nippon-Yasan for my Fokker fix:

http://i.imgur.com/6fTKz.jpg (http://imgur.com/6fTKz)

It's not ridiculously tight like my reissue VE-1 (same vintage). I would have preferred a TV-colour version, but wasn't prepared to pay the extra $100 eBay markup for a brighter white.

Now to find some display options (since Yamato discontinued all their valk-bearing display bases)...

UPDATE: Some display options arrived recently.

http://i.imgur.com/aCgSbdM.jpg (http://imgur.com/aCgSbdM)

Anyone feel like pineapple salad?

[Tober]

http://i.imgur.com/aCgSbdM.jpg (http://imgur.com/aCgSbdM)

Anyone feel like pineapple salad?

Meet the Fockers. :rolleyes:

Proto of the upcoming BANDAI DX YF-30 Chronos:

Photos from the Macross 30th Anniversary Exhibition in Osaka.

http://i.imgur.com/mePbp.jpg
http://i.imgur.com/rrTSB.jpg
http://i.imgur.com/KX2I1.jpg
http://i.imgur.com/bqjLd.jpg
http://i.imgur.com/t4pFk.jpg
http://i.imgur.com/TYDMg.jpg

Yeah, I've been lazy. :o

So did anyone get the VF-4G? Thoughts?

[seespotrun]

Proto of the upcoming BANDAI DX YF-30 Chronos:

...

http://i.imgur.com/mePbp.jpg



It's like the VF-0D we never got:

http://www.macross2.net/m3/macrosszero/vf-0d/vf-0d-fighter.gif (http://www.macross2.net/m3/macrosszero/vf-0d.htm)

One can dream...

[Tober]

The 0D.. :(

Hopefully one day Yamato can create it.

It doesn't seem like there is anything else significant on the horizon coming from them... :(

[Lord_Zed]

I transformed my VF0 a few days ago, it feels like a floppy mess these days, kinda dulls my desire for more.

I've got the 4G it is pretty nice, It's nice and solid and ever so sleek in fighter mode. I haven't picked up a new Yamato mold since the VF 11 but this one is it's equal.

My only real criticisms are the annoying missiles that fall of during transformation and the tiny un-articulated fists. I was sorta hoping Yamato would do more of the minor Valkyries one day, like the Mirage or Vampire.

This is the first time I've seen this YF 30, but the fighter looks cool, does anyone know what colour it will be? I hope it's not the bog standard white and red hero colours, that's getting old. (*edit* damn just googled the colour scheme, Alto again sigh!)

[Tober]

This is the first time I've seen this YF 30, but the fighter looks cool, does anyone know what colour it will be? I hope it's not the bog standard white and red hero colours, that's getting old.

Yeah, no. Alto color-scheme... :(

http://i273.photobucket.com/albums/jj230/AUST_Tober/5nwrjz9GiF000TpMaUjPQ_zps271aa3cd.jpg

http://i273.photobucket.com/albums/jj230/AUST_Tober/Itqw5wEnWTIxqb7MKkyg_zps85affcdc.jpg

http://i273.photobucket.com/albums/jj230/AUST_Tober/jJ3YkCfYkDxJG13TwOhgpg_zps648b275f.jpg

[VGMStudios]

When is this suppose to be up for preorder? Or did I miss out already.

[kurdt_the_goat]

Just received my VF-4G (along with MP Soundwave - best day evar!).
Haven't transformed yet but wow, even after seeing pictures and video online, i was still shocked to see just how thin they managed to get it!
Looks absolutely incredible and holds together beautifully.
Can't wait to transform it tonight!

[seespotrun]

Nekki Basara joins his sound blasting brother, Jazz:

http://i.imgur.com/pZFq2p0.jpg (http://imgur.com/pZFq2p0)

The sound booster is a nice looking piece, but while trying to put it on the VF-19, I could only wonder "WTF were Yamato thinking?"

The VF-19, on the other hand, is a sweet toy, if you can get past the Ronald McDonald colour scheme.

[gekisou]

俺の歌を聞っけ！！！！
That VF-19 looks awesome!

[Tober]

The Bandai DX RVF-25 is expected to be released in June. Preorders are expected to start tomorrow.


Goodbye Yamato. :(

Hello Arcadia...

[VGMStudios]

Going to skip this one. Really don't like the toothpaste green color.

[seespotrun]

Too bad it's sold out everywhere. Hopefully NY reopens some preorders later on. Experiencing the Bandai preorder window first-hand was surreal.

[Raptormesh]

Too bad it's sold out everywhere. Hopefully NY reopens some preorders later on. Experiencing the Bandai preorder window first-hand was surreal.

Yeah, not going to bother anymore with bandai's as for a chance to get one you pretty much have to pay premium at nippon yasan.

On the bright side my vf-4g's finally in the post after months of my being away. /cheer

[kurdt_the_goat]

Anyone else feeling a sense of relief that it's looking like Yamato won't make any more Macross toys? I love em and everything... and was fairly settled on not buying any more as it is... but having it definite, with no new toys on the horizon, it's kind of like i've won, outlasted the company and completed my collection (even though i only have a few!)

[Raptormesh]

Anyone else feeling a sense of relief that it's looking like Yamato won't make any more Macross toys? I love em and everything... and was fairly settled on not buying any more as it is... but having it definite, with no new toys on the horizon, it's kind of like i've won, outlasted the company and completed my collection (even though i only have a few!)

Nooo...i chucked a sad. There are still so many valks to be made. There's still bandai in the game, but i couldn't care less about their offerings.

[Dkaris]

Have they confirmed there will be no future releases?

[Tober]

Realistically, what else was there left for Yamato to do with Macross?

Word on the streets of Akihabara was that the next release would be the YF-19 ver 3... They'd just be going in circles.

Arcadia are apparently settling into their new premises now. There should be a report on MW in a week or two when they are interviewed.

[Lord_Zed]

Realistically, what else was there left for Yamato to do with Macross?




The bad guy Valkyries from Macross 7 would be nice, as would the VF 5000 Star Mirage.

[Raptormesh]

Well I don't mind a refresh of the YF-19, and maybe even the Macross The Ride planes.

[Tober]

We never got the Monster, SDF Macross (TV ver), Glaug, Spartan or Phalanx. So not much chance of the more obscure valks, really.

Apparently Yamato had three Macross projects in development, I don't know what the other two were.

[Dkaris]

Did I miss something? did yamato go bust ?

[VGMStudios]

What happened to the yf30?
I was looking forward to that.

[Tober]

Did I miss something? did yamato go bust ?

Yamato Toys are now trading as Arcadia. This was announced at Wonderfest (http://www.macrossworld.com/4283/farewell-yamato-hello-arcadia-of-my-youth/) a few months ago. There should be a proper report on what this means for the Macross license next week on MacrossWorld. Until then, just the usual panic and hearsay...


What happened to the yf30?
I was looking forward to that.

Unknown. Nothing in the latest Japanese hobby mags. Nothing has been seen of it since the first prototype images a few months ago.


Bandai's 1/72 VF-1S and FAST pack sets are up for pre-order.

[gamblor916]

Those new Bandai 1/72 kits look interesting. The VF-1 is tiny in that scale and making it transform is going to result in one fiddly and fragile model. I'll probably pick one up, it'll be interesting to compare to the Hasegawa scale kits.

[seespotrun]

Bandai's VF-1 kit looks like Bandai's way of testing the market for yet another VF-1 mould. I wouldn't be surprised if they upscaled and went with full VF-1 toys if the kits prove popular. Judging from the previews, it looks like what they're going for is too finicky for something that's destined to just be a model kit.

I have faith that Yarcadia will carry on the macross torch. We need someone to keep Bandai on their toes (and to show Takara how to make a proper transforming airplane).

[Tober]

Pre-orders for BANDAI's VF-25F are expected to re-open today. Release in July.

Starting in about 8 hours. Good luck to those who want one...

Hopefully not an April 1st MW joke...

[seespotrun]

Seems the preorder was pushed out to 3rd April, so those still playing along can repeat the Bandai preorder ritual all over again on Wednesday!

Fortunately, I'm not a fan of the VF-25's fighter mode, so I get to sit back and watch from the sidelines.

[Tober]

Super Parts and missiles for the BANDAI DX VF-171 Nightmare Plus.

5,775円 through the Tamashii Web Store
September release

http://p-bandai.jp/tamashiiwebshouten/item-1000080906/

http://i273.photobucket.com/albums/jj230/AUST_Tober/5L4KRCuqa6S3cqb4kaBng_zps003e5fbe.jpg (http://s273.photobucket.com/user/AUST_Tober/media/5L4KRCuqa6S3cqb4kaBng_zps003e5fbe.jpg.html)

http://i273.photobucket.com/albums/jj230/AUST_Tober/qERpAeQO5msy2OKX31jrew_zpsd9f78730.jpg (http://s273.photobucket.com/user/AUST_Tober/media/qERpAeQO5msy2OKX31jrew_zpsd9f78730.jpg.html)

http://i273.photobucket.com/albums/jj230/AUST_Tober/PLvEQn_IUTZF1Yg1zFFw_zpsd6e59179.jpg (http://s273.photobucket.com/user/AUST_Tober/media/PLvEQn_IUTZF1Yg1zFFw_zpsd6e59179.jpg.html)

[Raptormesh]

Lovely, would prefer if the parts are grey though.

[VGMStudios]

Already? The main figure is not even out yet!
Still thanks for the info.

[Tober]

Bandai DX Super VF-27 'Renewal'

http://i273.photobucket.com/albums/jj230/AUST_Tober/item_0000010367_01_zps10b89083.jpg (http://s273.photobucket.com/user/AUST_Tober/media/item_0000010367_01_zps10b89083.jpg.html)

http://i273.photobucket.com/albums/jj230/AUST_Tober/item_0000010367_08_zpsf732e176.jpg (http://s273.photobucket.com/user/AUST_Tober/media/item_0000010367_08_zpsf732e176.jpg.html)

Relase date August 2013
Price : ¥21 000
Early presales May 8, 2013 - 16:00 Japan time


Comparison with the older mold:

http://i273.photobucket.com/albums/jj230/AUST_Tober/item_0000010367_05_zps844acae1.jpg (http://s273.photobucket.com/user/AUST_Tober/media/item_0000010367_05_zps844acae1.jpg.html)

[Tober]

A picture of Arcadia's first Macross product:

30th Anniversary VF-1J

http://i273.photobucket.com/albums/jj230/AUST_Tober/arcadia-30th-Anniversary_zps9ab36b65.jpg (http://s273.photobucket.com/user/AUST_Tober/media/arcadia-30th-Anniversary_zps9ab36b65.jpg.html)

Yeah, I almost forgot to mention it... :o

[Raptormesh]

Thanks Tober, will try to get a preorder in for the 27. The pics on your links aren't working though.

[Tober]

Thanks, fixed. :)

[Tober]

Arcadia's VF-J 30th Anniversary Valkyrie is up for pre-order from the usual Japanese stores (so far).

http://i273.photobucket.com/albums/jj230/AUST_Tober/FIGURE-000334_05_zpsedef19a7.jpg (http://s273.photobucket.com/user/AUST_Tober/media/FIGURE-000334_05_zpsedef19a7.jpg.html)

http://i273.photobucket.com/albums/jj230/AUST_Tober/FIGURE-000334_01_zpsda00d843.jpg (http://s273.photobucket.com/user/AUST_Tober/media/FIGURE-000334_01_zpsda00d843.jpg.html)

---------------

Tamashi Nations revealed Super Parts for the DX VF-25G and a combined Super Parts and Ghost set for the DX RVF-25.

---------------

Anyone here after a RVF-25? I may have a spare...

[lancalot]

What site do you guys go for the preorders?... And also where a good place to get a DX YF-29?

[Tober]

What site do you guys go for the preorders?... And also where a good place to get a DX YF-29?

For the Bandai DXs you're lucky if you can secure a pre-order. Website exclusive stuff I order from Anime Export most of the time, or Nippon-Yasan.

Which DX YF-29 are you looking for, Alto's or the 30th Anniversary? Nippon-Yasan is probably your best option at this point.

[lancalot]

Cool thanks man..... ill check the site out ...
I don't really mind which version as they both nice....just which ever i found that cheaper i suppose . Ebay prices are crazy !

[seespotrun]

Preorders for RVF-25 and VF-25G super parts are already up on NY. After having just paid for my RVF-25 recently, my wallet is still crying; but Luca just wouldn't be complete without Simon, John and Peter.

RVF-25 super parts + ghost set: 9,450¥.
http://www.nippon-yasan.com/5369-23467-thickbox/macross-f-super-parts-ghost-set-for-macross-f-dx-chogokin-rvf-25-messiah-valkyrie-luca-custom-renewal-ver-limited-edition.jpg (http://www.nippon-yasan.com/lang-en/macross/5369-macross-f-super-parts-ghost-set-for-macross-f-dx-chogokin-rvf-25-messiah-valkyrie-luca-custom-renewal-ver-limited-edition.html)

VF-25G super parts: 5,350¥.
http://www.nippon-yasan.com/5368-23461-thickbox/macross-f-super-parts-set-for-dx-chogokin-vf-25g-messiah-valkyrie-michel-blanc-custom-renewal-ver-limited-edition.jpg (http://www.nippon-yasan.com/lang-en/macross/5368-macross-f-super-parts-set-for-dx-chogokin-vf-25g-messiah-valkyrie-michel-blanc-custom-renewal-ver-limited-edition.html)

[Tober]

Yamato finally release some info for their upcoming 1/60 YF-19 v2

http://i273.photobucket.com/albums/jj230/AUST_Tober/19v3_zps45428579.jpg (http://s273.photobucket.com/user/AUST_Tober/media/19v3_zps45428579.jpg.html)

[kurdt_the_goat]

Every time I think I'm out, they pull me back in! (http://www.youtube.com/watch?v=2D-tlsnk4fs)

Was fiddling with my 4G last night, man what an engineering marvel. I seriously have to glue those missiles in though, almost impossible to transform without knocking half of them out!

[Trent]

Was fiddling with my 4G last night, man what an engineering marvel. I seriously have to glue those missiles in though, almost impossible to transform without knocking half of them out!

Man I'd love one of them. Didn't have the cash when they were released and the prices people/eBay want for them now!:eek::(

[kurdt_the_goat]

Holy crap i just looked at Ebay prices, you're not wrong! I should have got 2 of them!

[Tober]

BANDAI DX VF-25A Cannon Fodder

http://i273.photobucket.com/albums/jj230/AUST_Tober/01_01_zps63e8f6be.jpg (http://s273.photobucket.com/user/AUST_Tober/media/01_01_zps63e8f6be.jpg.html)

[Lord_Zed]

BANDAI DX VF-25A Cannon Fodder

http://i273.photobucket.com/albums/jj230/AUST_Tober/01_01_zps63e8f6be.jpg (http://s273.photobucket.com/user/AUST_Tober/media/01_01_zps63e8f6be.jpg.html)

Ohhh that is tempting.

I do like the way CF mecha always have more realastic militaristic colours than Hero mechs.

[Soundwarp]

This thread means i need more money.

[Raptormesh]

Ohhh that is tempting.

I do like the way CF mecha always have more realastic militaristic colours than Hero mechs.

Indeed, I have all the CFs with doubles even just because of that. I don't like my valks looking like power rangers, although I did get the RVF-25 because i so love our F-18Fs that's wired to be EA-18Gs.

[kurdt_the_goat]

Watching Macross Plus again after this YF-19 news... up to the part at Macross Lake, kinda making me wish i got an SDF-1. No one's selling theirs right? :D

[Raptormesh]

Watching Macross Plus again after this YF-19 news... up to the part at Macross Lake, kinda making me wish i got an SDF-1. No one's selling theirs right? :D

You can probably hunt for one on Yahoo japan auctions but it's not going to be easy nor cheap.

I just released my preorder for the new VF-1 30th anni as I don't think he'll fit on my shelf or workspace as my valks tend to have muted colors. Really wish to support Arcadia but I'll put the money saved towards the new YF-19.

[Raptormesh]

Quite liking this, can't wait for the super parts end of this year!

http://i.imgur.com/9qX8SCV.jpg

[Tober]

Bandai DX YF-29 Isamu scheme:

http://i273.photobucket.com/albums/jj230/AUST_Tober/yf-29Isamu_zps4aa5fc58.jpg (http://s273.photobucket.com/user/AUST_Tober/media/yf-29Isamu_zps4aa5fc58.jpg.html)

[kurdt_the_goat]

That's pretty cheeky of Bandai!

I'm considering selling off my VF-25S Ozma renewal... is anyone on here still after one? As my only Bandai it just doesn't fit so well with my Yamato toys so i think i'd rather sell it and put the money towards a YF-19 next year. The prices are pretty outrageous if you can even find one these days, so i'm not sure how i'd price it just yet.

[Raptormesh]

I'll be skipping the new YF-19 in place of the Yf-29 as I've already got the old YF-19. I think it's good enough and Isamu needs a new ride. :)

Kurdt, check out macrossworld sale threads if you want an idea on how to price your VF-25S. Mandarake could also be a good source. Ebay is just overpriced, but I suspect its the same with TFs.

[lancalot]

Bandai DX YF-29 Isamu scheme:

http://i273.photobucket.com/albums/jj230/AUST_Tober/yf-29Isamu_zps4aa5fc58.jpg (http://s273.photobucket.com/user/AUST_Tober/media/yf-29Isamu_zps4aa5fc58.jpg.html)

that ok ...you know when the preorder?.. i dont want to miss it and pay ebay prices... need a yf29

[Raptormesh]

Apparently it's a Tamashii web exclusive so there won't be any dramas. The date in the advert is 25th July 4pm JST.

[VGMStudios]

That looks sexy! Getting one at a decent price will be a challenge.

Vgm out...

[lancalot]

That looks sexy! Getting one at a decent price will be a challenge.

Vgm out...

Yeah the YF29 is so sexy ...and it always been too expensive for me .... so hopefully this time i can grab one ... ill be on my comp looking at all the web pages on the 25th!!

[seespotrun]

Finally got around to opening mine up today. This is my only VF-25, so I was surprised by how much I like the fighter mode. Due to space constraints, I'll have to leave it in battoroid mode, though. Too bad the radome can't swing over the battoroid head to make an umbrella, like on the VE-1. It would look better that way.

http://i.imgur.com/3NEvupA.jpg (http://imgur.com/3NEvupA)

Now to start saving like a madman for the coming YF-19. And maybe the Isamu YF-29 as well, so I can have them side-by-side.

[kurdt_the_goat]

Just FYI, I listed my VF-25S on Macross World (http://www.macrossworld.com/mwf/index.php?showtopic=39621) the other day.
I'm not entirely comfortable with the price since it's more than i paid of course, but going rate is going rate so in that sense, it's not a shocking price i guess.

Basically i'm open to offers in any case so check it out if you're interested.

[lancalot]

i was checking my DX ..VF25F from it box and i notice that the white plastic is yellowing in some parts :eek::( .... did this happen to any of your yet?.. As it just slight but you can see it ... i don't want to try all the thing that out there on the net showing how to whiten it up ... plus it an expensive excise if it go wrong!

[lancalot]

finally got it !!! VF27 !~! :D:D:D now where to found a yf29 !!

On another note...i read somewhere about about open package from the post etc....
Well here what happen when custom open your package for inspection... they tape it all up properly, i didn't even know the package was open it except for the sticker on the package and a flyer inside the package ...
http://imageshack.us/a/img41/3932/c7uc.jpg

http://imageshack.us/a/img854/1250/cwkn.jpg

[VGMStudios]

Here is a stupid question, since the YF29 is an exclusive, where do we go to buy pre-order one? 2 days left and I am freaking out that I will miss out!!! HALP!!! haha!

[VGMStudios]

early preorder is up here:
http://biginjap.com/completed-models/7839-macross-f-dx-chogokin-yf-29-durandal-valkyrie-isamu-type.html

if anyone is interested.

[Tober]

Here is a stupid question, since the YF29 is an exclusive, where do we go to buy pre-order one? 2 days left and I am freaking out that I will miss out!!! HALP!!! haha!

It's a typical Tamashi exclusive, so Amiami, HLJ, Hobby Search etc won't be able to carry it.

Anime Export, Nippon-Yasan, Yokastta, Tokyo Hunter etc will start listing tomorrow. The pre-orders should be up for a few weeks, so no reason to panic.

[lancalot]

early preorder is up here:
http://biginjap.com/completed-models/7839-macross-f-dx-chogokin-yf-29-durandal-valkyrie-isamu-type.html

if anyone is interested.

i haven't heard or order from these guys yet...are they any good?

[Tober]

Nippon-Yasan (http://www.nippon-yasan.com/lang-en/macross/5567-macross-f-dx-chogokin-yf-29-durandal-valkyrie-isamu-type-edition-limitee.html&force=1) pre-orders are up too.

Anime Export will possibly be a bit cheaper including shipping, but they require payment upfront.

I've never personally used Big In Japan, but I've never heard anything bad about them.

[Tetsuwan Convoy]

I've used Big In Japan for a couple of the harder to find figmas. They were efficient and reasonably priced. Just expect the paypal payment to come in french for some reason...

[VGMStudios]

Thanks for the information Tober. That will help a great deal.
Lancalot ive used them before a few times and haven't had any problems. Hope this helps.

Just checked anime export. They are the most expensive.

[lancalot]

cool pre-order him :) ... thanks for the link Tober

[drifand]

Thought I would input that I have every old Takatoku VF 1A, 1S, 1J Hikaru, 1J Hikaru in grey, 1J Max, 1J Miria, Armoured, Strike, Super, Elintseeker, Super Ostrich. all 1/55 scale

For Yamato I focused on Macross Plus only as I have an issue with their quality control I decided not to buy most of their stuff.

Most of Macross Frontier.

Konig Monster, Macross Quarter
SDF 1

[Tober]

Thought I would input that I have every old Takatoku VF 1A, 1S, 1J Hikaru, 1J Hikaru in grey, 1J Max, 1J Miria, Armoured, Strike, Super, Elintseeker, Super Ostrich. all 1/55 scale

For Yamato I focused on Macross Plus only as I have an issue with their quality control I decided not to buy most of their stuff.

Most of Macross Frontier.

Konig Monster, Macross Quarter
SDF 1

Hmmm... Just curious, are you the same drifand (http://www.macrossworld.com/mwf/index.php?showuser=75) that used to post on Macross World about 10 years ago? :confused:

[Raptormesh]

I thought that name was familiar somehow...

[lancalot]

Thought I would input that I have every old Takatoku VF 1A, 1S, 1J Hikaru, 1J Hikaru in grey, 1J Max, 1J Miria, Armoured, Strike, Super, Elintseeker, Super Ostrich. all 1/55 scale

For Yamato I focused on Macross Plus only as I have an issue with their quality control I decided not to buy most of their stuff.

Most of Macross Frontier.

Konig Monster, Macross Quarter
SDF 1

Nice man...can you post some images up ...would love to see and drool over them...

[drifand]

Hmmm... Just curious, are you the same drifand (http://www.macrossworld.com/mwf/index.php?showuser=75) that used to post on Macross World about 10 years ago? :confused:

You gotten my brother. :)

We collect the stuff together.

[Tober]

You gotten my brother. :)

We collect the stuff together.

I don't have any vintage Takatoku Valks, but I am envious of that 1/55 Super Ostrich... :o

------

If anyone is after a VF-25F, I have a spare for sale for $150 COD or + shipping.