How not to break your City Commander

[Kyle]

The build quality, paint job and QC of this is exceptional. However, there've been reports of the neck ball joint on a few kits to be a little stiff and tight. If you find the neck ball joint to be very tight and cannot (1) turn or (2) move up or down, DO NOT force it. It can break! However, this can be fixed very easily. If you find you can turn the neck ball joint freely, then you can ignore this guide. Otherwise, please follow this simple little fix:

You should actually pull the head off first. (Do it gently.)
http://www.hk-tf.com/discuz/upload/attachments/month_0810/20081008_3d3faed4f331410877b7HoTLKFfrHpYp.jpg
http://www.hk-tf.com/discuz/upload/attachments/month_0810/20081008_190afbdc1a579a814aa2h9f5UKGvqiwy.jpg
The problem is most probably due to the red ball joint being pushed in too deep during assembly in factory. The pulling out of the head alone would already help to pull the red ball joint back into its proper position. Now you can try using a little force gently bit by bit to move the end around (like a joystick) to loosen it up. This should solve the problem.

[liegeprime]

Thanks for the :p;) heads up Kyle hehehhe. A forumer in TFPH who lives in Singapore already posted his on TFPH, man it looks soooo sweet. He didnt report any faults. So I guess his toy's head is not stiff. Cant wait to get my hands on this kit.

[STL]

Thank you heaps for this, Kyle! I thought I remembered this from somewhere and was trying to figure why my bad boy can't look up or down very much! The fix helped him to look down very easily now.

Could I ask what angle his head can look up to? The most I can get is about 10 degrees to the horizontal/direct in front. I want to push it up more but fear I might break this piece of art!

[Borgeman]

Thank you heaps for this, Kyle! I thought I remembered this from somewhere and was trying to figure why my bad boy can't look up or down very much! The fix helped him to look down very easily now.

Could I ask what angle his head can look up to? The most I can get is about 10 degrees to the horizontal/direct in front. I want to push it up more but fear I might break this piece of art!


+1 my dude cant look up either


George

[jaydisc]

Nooooooooo!!!!!! I'm too late!

http://lindalane.com/temporary/tf/DSC04382.jpg

I just assumed it wasn't a ball joint and only rotated it. When I pulled it off, I saw the stress marks. I tried to gently pull the ball joint out further, but the tiniest pull gave me a hairline fracture, so I stopped.

Kyle, any chance of Fans Project offering a part replacement service? I'm happy to pay.

[iceburn]

drat.......

[Kyle]

Could I ask what angle his head can look up to? The most I can get is about 10 degrees to the horizontal/direct in front. I want to push it up more but fear I might break this piece of art!


+1 my dude cant look up either

Mine can't look up either. :o I should mention this to FansProject. :p



Nooooooooo!!!!!! I'm too late!

http://lindalane.com/temporary/tf/DSC04382.jpg

I just assumed it wasn't a ball joint and only rotated it. When I pulled it off, I saw the stress marks. I tried to gently pull the ball joint out further, but the tiniest pull gave me a hairline fracture, so I stopped.

Kyle, any chance of Fans Project offering a part replacement service? I'm happy to pay.

I think a part replacement service is a very good idea. I'll check with my friends and see what we can do. ;)

[STL]

Nooooooooo!!!!!! I'm too late!

http://lindalane.com/temporary/tf/DSC04382.jpg

I just assumed it wasn't a ball joint and only rotated it. When I pulled it off, I saw the stress marks. I tried to gently pull the ball joint out further, but the tiniest pull gave me a hairline fracture, so I stopped.

Kyle, any chance of Fans Project offering a part replacement service? I'm happy to pay.

:( That's not good at all. :(

*Runs if the klutz in me didn't do the same thing and not notice* Phew. Lucky me.

My question too is how can replace just the red part? I don't think you can pull it out of the head, right?

[Kyle]

:( That's not good at all. :(

*Runs if the klutz in me didn't do the same thing and not notice* Phew. Lucky me.

My question too is how can replace just the red part? I don't think you can pull it out of the head, right?

It's actually possible to pull out the red part (if you do it VERY carefully). I did once with mine. :p

[STL]

It's actually possible to pull out the red part (if you do it VERY carefully). I did once with mine. :p

Me STL too much much wimp to try! :o :rolleyes::D

[lcz128]

Heh. Thanks for that! :D I just got my dude to be able to look up down and all aroung (limited up, great down :D) I just thought it wasn't a ball join or something. Again, like others - too scared to chance breaking this!

That said, if you REALLY need to get the ball out if you've broken the peg, I wouldn't mind dremeling it out for ya :)

[iceburn]

hehe..managed to get my head out first and move the peg around to ensure it rotates well before popping it back; however, that's not a problem i have...

first of all, my box seems to have been opened as the round sticker "tab" had fell lifted up and left unsealed and dirty. the problem is that on my right arm, there seems to be a "slight" scratch with black marks that cannot be removed.


http://images.icebu12n.multiply.com/image/3/photos/61/1200x1200/24/CC-Kit-Slight-defect.JPG?et=XuovyzW2LA1Y37MYMLxx6A&nmid=112402033

[Kyle]

first of all, my box seems to have been opened as the round sticker "tab" had fell lifted up and left unsealed and dirty. the problem is that on my right arm, there seems to be a "slight" scratch with black marks that cannot be removed.

This is shocking! :eek: I hope this is only a careless accidental mix-up. :( I believe I can do something about this for you.

Does the same problem (or other problems) occur on other parts? Let me know.

[iceburn]

nah kyle..the rest of the figure is fine.

legs were difficult to pop-in but i manage to do it without stressing the parts. don't think i'll be dismantling him anytime soon.

[Kyle]

nah kyle..the rest of the figure is fine.

legs were difficult to pop-in but i manage to do it without stressing the parts. don't think i'll be dismantling him anytime soon.

Noted. Don't worry I'll fix this.

[iceburn]

:) overall, one very satisfied customer!!

[sifun]

kyle = my new cult leader

[roller]

Can we start another thread?

This one doesn't help me, i want to break my city commander

ta

[iceburn]

Can we start another thread?

This one doesn't help me, i want to break my city commander

ta

bish *knocks roller on the head*

[Golden Phoenix]

bish *knocks roller on the head*
+1

[Gutsman Heavy]

Can we start another thread?

This one doesn't help me, i want to break my city commander

ta

PM me I'm master in that regard!

[Kyle]

I have something planned for Gutsman Heavy, sifun, Jaydisc and iceburn. I'll try to post the details between classes today. If not then I'll post them after work tonight. (Sorry I was too tired and just fell asleep last night. :o )

[1orion2many]

:)It's always hard to tell if your awake anyway Kyle with your big Emo fringe:p:D.

[Kyle]

:)It's always hard to tell if your awake anyway Kyle with your big Emo fringe:p:D.

It is not an "Emo fringe" by "intent"... :o

I'm just too cheap and lazy to go get my hair cut...