Printable View
A prototype of this was shown a while back, but new colour images popped up today. Supposed to be Soul of Chogokin style, and definitely looking the part - just wonder about price now!
http://i.imgur.com/5MQoz.jpg
http://i.imgur.com/jcAaP.jpg
http://i.imgur.com/hLcb2.jpg
http://i.imgur.com/8F7rs.jpg
I wants one... I needs one :cool:
Ooo, I was checking this out before, but heard it was cancelled. I'd be all over that like something covering something else!
Oooh, nice! - Wasn't it supposed to cost something close to $2-300 though? :eek:
Hmm, hopefully that was why it has disappeared and re-appeared...Quote:
Originally Posted by Hursticon
:D
*Cry* this is going to be so hard to not buy.
http://i.imgur.com/JzL16.jpg
Oooooo! No mention of price anywhere? All I can find is a defunct link to toy freakz that reckons its $250!!
It looks so much like the Matchbox version I had as a kid, but with 'modern' articulation. Nicely nostalgic.
Hmm, not entirely sure as to how this 'news' is since I ahven't been able to find much since April, but collectiondx have a chat about this with a guy in the know who has the prototype...
Starts about here
http://www.youtube.com/watch?v=B-c_M...ilpage#t=2683s
Prototype shows up at 46 minutes
Turns out i was right... :DQuote:
Originally Posted by kurdt_the_goat
Did you get one? pics :DQuote:
Originally Posted by kurdt_the_goat
Yeap! Will take some pics when it arrives!
Damn you. :pQuote:
Originally Posted by kurdt_the_goat
Vehicle Voltron is one of those must have bots for me. He was central in my love for large machines.
Wheres this TFW link you were on about?
Ah i was just saying the place i got it from (Chimungmung) was recommended by someone in a TFW thread.
I contacted the guy running that shop over email to request EMS and he told me mine's the last of his in-hand stock at the moment.
It's also due in July at HLJ. Robot Kingdom appears to have shipped out some despite their product page saying no release date and in stock at the same time, as this guy's review mentions he got it from them.
From reading around, it seems to have had 2 batches of release in quick succession and RK seem to have got their hands on the first so far, which has a few QC issues, whereas the others have waited for 2nd batch with supposed improvements. I got the guy at Chimungmung to inspect my box before shipping so hopefully I won't have any issues!
I should say Tets, even once this guy arrives i'll still have some jealousy of your original (plus i won't forget how fun it was watching that auction end!)
I found what seems to be the origin of the news that RK somehow got and shipped first-run products - the Miracle Productions Facebook page has a comment by someone who got his with a defect from RK, then Miracle responded with this:
It's all quite strange cause RK have had the product listed for a very long time! At this point though i wouldn't order it from them if anyone's considering.Quote:
... we would like to clarify that we do not have direct connection with the shop you mentioned, RobotKingdom.com. We have not directly distributed any products to this shop.
Oh yes, that's a tale I regail to all and sundry. A mighty adventure if ever there were one:DQuote:
Originally Posted by kurdt_the_goat
AS for me, I think I will get one, but he will wait to next pay cycle before I pull the trigger. Got the car insurance ATM.:o
On the plus side, at essentially $300 he can't get much pricier can he?
Trusted by Australia Post with the power to form Voltron!!
http://i.imgur.com/Xgju3znl.jpg
Initial check - no paint issues, parts broken or pieces missing! In fact the paint is beautifully applied and a lovely sparkling variety.
Each piece has so much metal that i think when formed this beast will be heavier than a metal Predaking... can't wait!
Ooh! :eek::eek::eek:
Pics, pics, PICS! :D:cool:
I just have this one for now, more in a few hours!
http://i.imgur.com/Yjy6Z7ul.jpg
I have to enact minor repairs as well; pulling him apart i mistook a protruding piece for a button and pushed it right inside. It looks like i can fix it easy enough once i get my hands on a screwdriver at home, thankfully.
He is absolutely magnificent! The heft, the quality of connections to latch everything in place, the overall look and quality of materials, it's just brilliant! I am in AWE and can't wait to build him up and down again several times tonight :D
And here we go! Easily fixed the pushed in part, and in doing so discovered some articulation i'd missed!
This behemoth has so much going on i can't get to individual vehicles or teams tonight! Plus he's so big he played havoc with my lighting and haste!
Some comparison pics
Perfect scale and look!
http://i.imgur.com/icFzoiYm.jpg http://i.imgur.com/NqUiPetm.jpg http://i.imgur.com/hJ9AOANm.jpg
Some poses & details
SWEET JESUS! This guy looks so awesome!
I did seem to have either a breakage in box or with little effort from me, honestly not sure - on one of my hand pieces. The one that splits the fingers off to allow you to insert blades or spears, the the fingers are connected by a small piece of plastic but mine is snapped at the middle. They still hold back into the palm mind you, and i think only a dab of glue would fix it. The hands are very tight to remove the fingers before you can put a weapon in, so i'd just advise caution prying them out!
The swords have a rectangular shaped handle that fits into rectangular shaped holes, which unfortunately makes the dual-handed sword wield pose barely attainable. If the handle and hole was just a cylinder it would have been able to do it easily, but i guess they were going for toy accuracy perhaps.
http://i.imgur.com/MgtI9C2m.jpg http://i.imgur.com/OXJXWaom.jpg http://i.imgur.com/oD1rVDKm.jpg http://i.imgur.com/geMqkSYm.jpg
Arm & shoulder articulation
Pretty much just his design getting in the way of almost flawless arm articulation! And even then the chest jet accomodates it by folding the wings in. The magnet connection is a bit of pain when posing the arms though, best to just place the jet on after you're finished.
http://i.imgur.com/XMxBNVTm.jpg http://i.imgur.com/w9hl0Lym.jpg http://i.imgur.com/151eS6tm.jpg
Waist articulation
Full 360 rotation and a couple of ratchet notches forward too!
http://i.imgur.com/w2zDZSbm.jpg http://i.imgur.com/SngEwyem.jpg http://i.imgur.com/w7rlewWm.jpg
Head articulation
It's on a ball joint on the attachment piece - the attachment piece can but placed forward or back to aid in tilting the head in a desired direction.
http://i.imgur.com/7IVSOzfm.jpg http://i.imgur.com/krz7KNZm.jpg
Leg and feet articulation
No strings baby!! Stunning weight distribution and posing potential!
http://i.imgur.com/7GyD1REm.jpg http://i.imgur.com/eI0iPMXm.jpg http://i.imgur.com/3sSTAWXm.jpg http://i.imgur.com/jtbmNnWm.jpg
Release button and not release button locations!
Yes, that's a piece of blu-tack holding the groin piece door, which was there the first time i opened it. How it got there, I will never know, but why it's there is unfortunately obvious. Not a big deal really. The release button in there, and the other one in the torso aren't really needed so the door can just stay shut the whole time.
The lower waist piece has the protrusion that i accidentally pressed inside the toy, but as you can see it was an easy fix. Blessing in disguise in fact, taking that piece apart led to the discovery of the waist articulation!
http://i.imgur.com/zWww7uIm.jpg http://i.imgur.com/dDhhoOHm.jpg http://i.imgur.com/1Ccpo1Om.jpg http://i.imgur.com/6vkdgREm.jpg http://i.imgur.com/LB3dSQPm.jpg http://i.imgur.com/l4hb9PMm.jpg
The Weigh In!
And MP Vehicle Voltron weighs in at.... 1.15kg / 2.53lb!
For comparison's sake:
- MP-1 Optimus Prime & Lionbot (Matchbox KO): 1.1kg / 2.42lb
- 2010 Predaking: 1.25kg / 2.75lb
http://i.imgur.com/GrAtpu5m.jpg
Thanks for posting those pictures, great stuff and can really "feel" that you are enjoying the figure! :)
Very cool.
Thanks for the pics man :); He really looks amazing and his poseability is incredible considering his composition & weight :eek:, he also scales really well with the Masterpiece & Matchbox Lion-Force Voltrons - you're right! :cool:
Holy crap.
just got mine in today and apparently part of 3rd batch, no problems except some loose pins on the blue submarine thing, which I managed to fix myself. Magnificent is a word that springs to mind.
Knew I shouldn't have opened it up at work as I have whiled away almost two hours just messing about.
here are some results. Swords aren't metal, little bit sad, but then not really as they'd be too heavy.
http://i91.photobucket.com/albums/k3...pscea8f61c.jpg
Rocket punch!
http://i91.photobucket.com/albums/k3...psfabb36b0.jpg
Shakespeare
http://i91.photobucket.com/albums/k3...ps9b6160d8.jpg
Bravo!
http://i91.photobucket.com/albums/k3...ps004db7bd.jpg
You can almost make him facepalm
http://i91.photobucket.com/albums/k3...ps18bc8845.jpg
I was pretty impressed at the level of detail on this bad boy. even to the extent of putting in this rather superfluous red bit on the chest piece that slides up for vehicle mode whic I am pretty certain nobody ever bothers with
http://i91.photobucket.com/albums/k3...psa8315f50.jpg
Tempting…
Impressive! How much is it to get one?
About 25000¥ and above. I didn't bother as I have the original dx version.
how much would that be in australian dollars?Quote:
Originally Posted by drifand
Well is $179 us so give and take about $240 aust delivered?