FrenzyRumble FOC Breakdown Class WIP

Printable View

10th May 2013, 08:53 PM
lancalot

FrenzyRumble FOC Breakdown Class WIP

My breakdown Kit arrived today.....WWWooooHHHoooo :D Love the new head!! The LED for the head

Also BH wheeljack white plastic got a weird black colour mix in and as you can see it on his right leg ...there big spot ..so ugly ...lucky im repainting him !

> KITS INCLUDE THE FOLLOWING :
- Fine tip detail brush
- Wide tip dry-brushing style brush
- Transformers : Prime (Beast Hunters edition) Wheeljack
- Custom made EXCLUSIVE "Game Accurate" Breakdown head! (cast in black high-quality resin) created by sculpting master "fakebusker" (image coming soon)
- Scratch-made (and cast in black resin) (set of 4) custom "Cybertron Style" wheels (to replace stock wheels)
- 1/8 ounce Testors enamel custom mixed "Glowy Purple" paint
- 1/8 ounce Testors enamel flat black paint
- 1/8 ounce Testors enamel flat white paint
- 1/8 ounce Testors enamel custom mixed "Mech Silver" metallic paint
- 1/8 ounce Testors enamel custom mixed "Breakdown Red-Orange" paint
- 1/8 ounce Testors enamel custom mixed "Metallic Dark Blue" paint
- 1/8 ounce Tamiya Acrylic ink (for panel lining and washes)
- 1x Decepticon Symbol c/o reprolabels.com
- sanple amount of FIXIT� Sculpt epoxy 2-part sculpting clay
- 1x pre-wired SMT (tiny!) yellow LED light
- 1x coin battery (3 volts)
- 1x coin battery holder
- 1x mini on/off switch
- Solder
http://imageshack.us/a/img213/4497/img0936medium.jpg
11th May 2013, 08:14 AM
M-bot

I'm not signed up for this class, will be interested to see how it comes out.
30th May 2013, 07:21 PM
lancalot

Well today ive started one this project...and was doing the led head setup...
Man i hate soldering the led ! ...i hate LED !!! I cant believe everything you can imagine did happen !! ...i check the led ..work perfect ...then heat shrink it..didnt work ....so had to cut it open.... the red wire fell off... solder that back on ..worked...taped it up and twist the wire together ...didn't work again/...! then the resister fell off... ! F'"K!! drop on the ground and couldn't found it until half hour later@! in the end i think i fried the led from too many soldering to it..! Lucky i got a spare one somewhere around here ..try again tomorrow ...also when i was popping out the wheels the clip broke on me :( just not my day...
1st June 2013, 07:26 PM
lancalot

looking at the concept art i decided to add spike to the back of his head and also to the front bumper keeping in mind the length it stick out for transformation into robot mode

http://imageshack.us/a/img849/663/wfcbreakdown0.jpg

http://imageshack.us/a/img209/2057/img0965medium.jpg

http://imageshack.us/a/img41/4726/img0970medium.jpg
1st June 2013, 09:33 PM
AJ_Prime

Looking forward to seeing how this turns out. If it's anything like ur Grimlock and Predaking then it's going to be amazing! Perfect mold for breakdown too, love those wheels!
2nd June 2013, 04:22 PM
M-bot

Quote:

Originally Posted by lancalot

Well today ive started one this project...and was doing the led head setup...
Man i hate soldering the led ! ...i hate LED !!! I cant believe everything you can imagine did happen !! ...i check the led ..work perfect ...then heat shrink it..didnt work ....so had to cut it open.... the red wire fell off... solder that back on ..worked...taped it up and twist the wire together ...didn't work again/...! then the resister fell off... ! F'"K!! drop on the ground and couldn't found it until half hour later@! in the end i think i fried the led from too many soldering to it..! Lucky i got a spare one somewhere around here ..try again tomorrow ...also when i was popping out the wheels the clip broke on me :( just not my day...

Not sure if there's a local branch near you, but I got a bunch of LEDs and associated bits and pieces (for a custom) from a Jaycar store near me. They're pretty good at the whole electronics gig. You should be able to get pretty cheap single LEDs from them if you need to. http://www.jaycar.com.au/
2nd June 2013, 06:45 PM
gamblor916

Interested to see how this turns out. The new wheels and head sculpt look really good.
2nd June 2013, 08:13 PM
CHILENO20

What's the website where you can join for something like this? :confused:
2nd June 2013, 08:46 PM
M-bot

Quote:

Originally Posted by CHILENO20

What's the website where you can join for something like this? :confused:

Generally speaking, they're limited time/limited places online classes offered by customiser FrenzyRumble which includes online videos, paints, brushes, accessories and custom built parts, and other bits and pieces depending on the item and the extras on offer. Some come with base figures, others don't.

Best way to see when they come up is via FR's Facebook page, although I imagine his website (www.frenzyrumble.com) has details too. A bit pricey, especially with the extra shipping to Oz from the US (still worth it for mine), but I understand FR is gong to offer video access from previous classes for a much smaller cost from his website somewhere down the line.
2nd June 2013, 09:10 PM
CHILENO20

Thanks M-bot. I work on some customs myself but I'm a REAL novice at it. Mainly just repaints using same moulds. Would prefer a proper way to do it and looks like a way.
3rd June 2013, 01:20 AM
lancalot

Quote:

Originally Posted by CHILENO20

Thanks M-bot. I work on some customs myself but I'm a REAL novice at it. Mainly just repaints using same moulds. Would prefer a proper way to do it and looks like a way.

If your starting out ...you should do at least one of his classes....the tip that he give is invaluable.... To me he one of the best customiser out there so he know what he talking about... And in the video be goes step by step....
Just join his FB page to get the lastest new and when his next class will be... it usually sell out in a couple of days of the intake ....
http://www.facebook.com/frenzyrumblecustoms?fref=ts
4th June 2013, 10:30 PM
lancalot

Here the car mode..... i still need to finish up the robot mode.... He was just a pain to do ......every thing keep going wrong...i was trying using enamel...but using a paint brush left too many lines... with his new head when i tried to push it into the socket , the ball joint snap off.:eek:! So had to wait for the super glue to dry... i was peeling the masking tape off it peel with it the paint job underneath as well. :( ... shaved the front wheel so it more narrow then the back one ..Also added the spikes to the back end because it look hollow before and the front to look like the concept art ... what you guys think?

http://imageshack.us/a/img706/3182/img5785medium.jpg

http://imageshack.us/a/img854/8128/img5787medium.jpg

http://imageshack.us/a/img189/5930/img5791medium.jpg

http://imageshack.us/a/img818/1136/img5788medium.jpg

http://imageshack.us/a/img707/9148/img5794medium.jpg

Added more splatter effect on the white parts ...

http://imageshack.us/a/img845/6572/img0999medium.jpg

http://imageshack.us/a/img854/6177/img0998mediumc.jpg

Custom head by fakebuster with LED mod for the eyes...switch and battery behind the chest

http://imageshack.us/a/img809/8869/img0991medium.jpg

http://imageshack.us/a/img542/6190/img0997medium.jpg
5th June 2013, 03:09 AM
VGMStudios

Painters tip. Never use masking tape when painting. It will do as you mentioned. Use painters tape or hobby tape. The glue is not as strong that it won't ruin whatever is underneath.
5th June 2013, 10:40 AM
ILikeSoundwave

Wow that looks spectacular lancalot!
5th June 2013, 06:38 PM
lancalot

Quote:

Originally Posted by ILikeSoundwave

Wow that looks spectacular lancalot!

thanks man.....

Added the finally picture up above .... in robot mode ...custom head with LED mod for the eyes, switch and battery behind the chest , which fits perfectly there ... Car mode added splatter effect on the white parts ...
5th June 2013, 06:52 PM
i_amtrunks

Looks brilliant lancalot. Robot mode in particular, it is amazing what a tiny led light can achieve. Cannot say I am overly fond of the pink/purple on the tires and spikes, but that is just a personal thought.
5th June 2013, 06:59 PM
lancalot

Quote:

Originally Posted by i_amtrunks

Looks brilliant lancalot. Robot mode in particular, it is amazing what a tiny led light can achieve. Cannot say I am overly fond of the pink/purple on the tires and spikes, but that is just a personal thought.

The pink/purple is that im trying to paint a glow effect like on the concept art from teh first page ....but i think i over did it and put it every where :rolleyes: same with the damage effect as well ... got abit carried away :D
5th June 2013, 08:06 PM
M-bot

I think I like the bot mode a bit more. The car mode, with the spikes and the glow and all the colours and the battle damage looks a bit too busy. I agree that you probably overdid the battle damage a little, although considering all the mishaps you had doing this one, I don't blame you. The head and the LEDs looks great though!:D
5th June 2013, 08:18 PM
Bidoofdude

Really cool dude. :cool: Also love how this guy's design incorporates the G1 model with a bit of TFP thrown in to give that beefy look. :cool::D
5th June 2013, 08:26 PM
SMHFConvoy

I like it.

Yeah regular masking tape is a pain. You can reduce the adhesion by putting the tape on your pants and peeling it off a few times. I've heard that using aluminium foil or blue tack works as well.
5th June 2013, 08:29 PM
M-bot

Quote:

Originally Posted by SMHFConvoy

I like it.

Yeah regular masking tape is a pain. You can reduce the adhesion by putting the tape on your pants and peeling it off a few times. I've heard that using aluminium foil or blue tack works as well.

Yep, I've used blutack, it's especially good for masking irregular shapes and curves.
5th June 2013, 09:42 PM
UltraMarginal

Beautiful work, it really comes across as Breakdown especially the robot mode.
5th June 2013, 11:54 PM
lancalot

Quote:

Originally Posted by SMHFConvoy

I like it.

Yeah regular masking tape is a pain. You can reduce the adhesion by putting the tape on your pants and peeling it off a few times. I've heard that using aluminium foil or blue tack works as well.

Quote:

Originally Posted by M-bot

Yep, I've used blutack, it's especially good for masking irregular shapes and curves.

That a cool tip...i keep that in mind...yeah very hard to cut out the irregular shape ....

One thing i got to point out is that the glow and the battle damage with the added spike are all my doing and not part of FR class ...as he abit slow on posting his videos..so i just decided to finish breakdown off my way....but that because he got so much going on like the scratch build 71cm Epic optimus prime...
http://www.procustomizers.com/showth...394#post132394
5th June 2013, 11:59 PM
lancalot

Quote:

Originally Posted by M-bot

I think I like the bot mode a bit more. The car mode, with the spikes and the glow and all the colours and the battle damage looks a bit too busy. I agree that you probably overdid the battle damage a little, although considering all the mishaps you had doing this one, I don't blame you. The head and the LEDs looks great though!:D

Yeah after all that happen with this guy i just wanted to finish him off.... Cause if i left him for a while ..i don't think ill ever come back to him ...He was just a pain ...even to the very end! the logo sticker on his chest didn't even peel off properly as it wasn't cut correctly and i tare it almost in half :eek: ...lucky i stopped in time and was able to save it