MP G1 Ironhide WIP - Okay, so sick of waiting for Takara

Hi guys,

I have been out of the customising scene for a while. This is just to get warmed up. Yes, its non-transformable however, it is super poseable.

These are the first shot Work in progress. I didnt want to do this on an MP Prime yet as I am quite rusty as I havent been doing customs for a while now but I promise my next project will be transformable.

Anyway, its just a project I have been working on. Any suggestions for the head is welcome, however, as you can see, this is an MP size. So, if suggestions that would fit an MP would be greatly appreciated.

Anyway, I got sick of waiting for Takara's MP range and decided to do my own.

http://i245.photobucket.com/albums/g...9/DSC02976.jpghttp://i245.photobucket.com/albums/g...9/DSC02977.jpg
http://i245.photobucket.com/albums/g...9/DSC02978.jpghttp://i245.photobucket.com/albums/g...9/DSC02979.jpg
http://i245.photobucket.com/albums/g...9/DSC02980.jpghttp://i245.photobucket.com/albums/g...9/DSC02983.jpg
http://i245.photobucket.com/albums/g...9/DSC02981.jpg - See through chest piece. Yet to paint the inside and this is only first coat.

Would love to hear feedback.

Thanks,

Kelvin

It looks awesome! :)

I'm trying to figure out from where you've salvaged the parts from & I'm drawing a complete blank... :rolleyes: :D

Ideas for a head? Hmmmm, Well of all the Alt Ironhides done over the years, they've either been based on Alt Skids...

http://www.seibertron.com/images/toy...r_skids067.jpg

or sculpted by guys like Valkfan

http://img.photobucket.com/albums/v4.../ironhide2.jpg

But as those heads are all Alt-sized, I'm pretty sure they'd look way too small for your MP-sized Ironhide...

Hi Pulse,

Thank you. The base figure comes from Metalverse version of prime. I know, you're probably going to say that I am mad for doing it on that figure.. But I got the version that suffered the paint fading issue and I hated it the day I got the package in MISB. The rest was scratch built with Styrene sheets and hinges and putty.

So, instead of that, I made a figure that I will be happy with. Just missing the head.. :( But I am looking at a few.

The head suggestion from Skids is too small for this figure. I know the ones I have seen are all like this. However, there hasnt been many attempts of this figure on the net for MP size.

Therefore, I am thinking of using the Ironhide Bust head. Do you know how large that bust is?

The one I am referring to is this:

http://www.comicstatues.com/images/IR_front_lg.jpg

What do you think?

Looking good. And if/when you do customise a MP Prime for this I could use a spare headlight... :)

Kelvin,

I could see that head working :)

This page lists him as being approximately 6" tall but will you be happy with his scowl...

Um, but isnt the G1 busts made of porcelain or something? You wouldn't be able to pry off the head from that kelvin if it is.

Quote:

---

Originally Posted by liegeprime

Um, but isnt the G1 busts made of porcelain or something? You wouldn't be able to pry off the head from that kelvin if it is.

---

Very true, but I'm sure he could cut it off and drill/sand in a socket of sorts to place on the ball joint.

It looks very good Kelvin, cant wait to see it with the head attached. Just hope you can find a statue at a low price seeing what you want to do to it!

Thanks for all the comments.

Paulbot - will definitely let you know if I have a spare. I will even give it to you for free. so here's rooting this project turns out well so I will do the ratchet.. hehe

Pulse - Thanks. Actually apparently there is a Diamond one coming out. Better head. I wonder if that would fit and should I wait.

Liegeprime & I_am_Trunks - yeah, agreed to be tricky if Porcelain, am finding out now. Thought it was just PVC, although it is still possible. I take it no one owns these busts in on the board.

Yeah, definitely, I am thinking of putting a ball point that fits so that it can turn left right and up down for the head. And I have the gears already for it. Just waiting on the seller's response about the bust. If it all fits well, I will get it. Found one for $10 but the shipping is steep. If it matches, I will still go with it. Its a 6" bust, and I saw pictures of the Wheeljack one next to the MP Prime, the head size looks perfect. But I am not sure if this is the same.

Will definitely update as I do more.

Do you guys reckon I should paint the body (back) metal colour or leave it red. True G1 is metal brownish type colour.

Thanks for all the feedback so far. Really appreciate it.

greatnesss!!

the dimensions are good and very G1 accurate, i see that the fist could possibly be removed, great if you can make some accessories from the g1 cartoon

This is looking good. I will watch this thread with interest. :)

I'm loving the G1 toy-accurate head on that thing ATM! :D

Kelvin, I don't have the Ironhide bust but I own the Grimlock WW bust and have seen the Starscream and Megatron busts firsthand. The Diamond heads are about 1.5 cm by 1.2 cm on my Grimlock... if that... so I wouldn't hold out by breath on the Ironhide statue being a good avenue.

I seem to recall that the Hard hero busts has slightly larger heads but the only time I've ever seen them first hand was at a collector's house that I bought something from but haven't seen in many moons so I'm not sure how that'd rate.

Thanks STL for the info. I actually went ahead and molded a head myself instead. I found that it is porcelain and it would be pain to do. There is a diamond one coming out that isnt but thats not due till Nov.

Anyway, I didnt really want to cut the statue anyway as its abit of a waste.

I will put the update up in the next few days so that my Ironhide doesnt fall into Gok's comment of the G1 likeness.... hehehe..

Hope the head does it justice. I need to do some sanding and create some new knees for the figure also.

Thanks for those interested in this thread and all your comments so far. Its very encouraging.

Hi guys,

Here is a new update of Ironhide with a head. Ended up casting my own instead of the bust.

http://i245.photobucket.com/albums/g...9/DSC02986.jpghttp://i245.photobucket.com/albums/g...9/DSC02992.jpg
http://i245.photobucket.com/albums/g...9/DSC02985.jpghttp://i245.photobucket.com/albums/g...9/DSC02987.jpg
http://i245.photobucket.com/albums/g...9/DSC02988.jpghttp://i245.photobucket.com/albums/g...9/DSC02997.jpg
http://i245.photobucket.com/albums/g...9/DSC02998.jpghttp://i245.photobucket.com/albums/g...9/DSC02999.jpg

He's still not quite done yet. I am getting a new hand for him and working out a weapon he can hold. I contemplated on the knee and thought that I like it the way it is for the leg. So, I will concentrate on the hand and the weapon first.

Here is the MP family group shots:
http://i245.photobucket.com/albums/g...9/DSC02984.jpg
http://i245.photobucket.com/albums/g...9/DSC02989.jpghttp://i245.photobucket.com/albums/g...9/DSC02993.jpg
Friendship shot with Prime and also with my early custom of Warpath.

http://i245.photobucket.com/albums/g...9/DSC02995.jpghttp://i245.photobucket.com/albums/g...9/DSC02996.jpg
A tribute to Wikkid (Skyfire) and Menchoy (Grimlock)

http://i245.photobucket.com/albums/g...9/DSC02991.jpg
Final shot of my proudest customs.

Thanks,

Me likey... :)

After the matrix rejected UM, I guess Ironhide might as well give it a go... :D

hahaha yeah, noticed the matrix too but it can be removed (with some difficulties)

Matrix was the first thing I noticed after I stopped looking at the head.

Thats a mighty fine job you have done with the head sculpt, looks bloody good.

Hi guys,

Just finished the weapon. Now that is left is just touch up.

Pulse & Iceburn - thanks for the comment. Regarding the matrix, it comes with a cover so I can cover that up as an accessory if required. However, I like the fact that its see through and since UM did get rejected on this, it may as well be Ironhide.

I_am_trunks - thank you for the comment. I hope I can do better on the next one. Alot of trial and error on this one. Had today off work, so were able to spend some time to finish this off to this point.

http://i245.photobucket.com/albums/g...9/DSC03000.jpghttp://i245.photobucket.com/albums/g...9/DSC03001.jpg
http://i245.photobucket.com/albums/g...9/DSC03002.jpghttp://i245.photobucket.com/albums/g...9/DSC03004.jpg

Can anyone guess what gun that is from?

Enjoy.

Looks kinda Rodimus-ish. :p

Btw are you going to modify the innerds to lose the MP Prime gut and Matrix? Or is that Ironhidimus Prime? ;) Also, show us the vehicle mode!

Hi Gok,

As per my first post, this is a non-transforming kitbash.

Regarding the matrix, I have a cover for it that can cover it up but I kinda like it the way it is now and have the Ironrodimish feel to it.

Yes, the gun is modded to be held into the hand and its using Rodimus Prime's.

Thanks,

Now all you need is an action pose of MP Megs ending Custom Ironhide's life :p

Quote:

---

Originally Posted by Lint

Now all you need is an action pose of MP Megs ending Custom Ironhide's life :p

---

I'm thinking of Ironhide wasting both Megs & Screamer at the same time... :D

How about I'll get out all the MP Autobots and have them go against the MP Decepticon.... :) That would make me smile and that would be quite a shot.

In the Autobots corner..

Grimlock, Swoop, Slag, Sludge, Skyfire, Warpath, Ultra Magnus, Rodimus Prime, Optimus Prime and now Ironhide

In the Decepticon corner..

Megatron, Shockwave, Soundwave, Starscream, Skywarp and Thundercracker

Can see who is the loosero on this as the Decepticreeps are outnumbered.

That would be quite a battle scene...

I like it. Only thing is the gun that sticks out as being too big. But man I'm jealous of those customs u've got.

Hi all,

Latest update. Just finished Ironhide with the final touches. Here are the updates:

1) Final coat of paint on the figure
2) Updated white band at the bottom of the front
3) Remolded Head - smoothen the mold at the top of the helmet and face generally

http://i245.photobucket.com/albums/g...9/DSC03039.jpg
http://i245.photobucket.com/albums/g...9/DSC03038.jpg
http://i245.photobucket.com/albums/g...9/DSC03037.jpg
http://i245.photobucket.com/albums/g...9/DSC03040.jpg

Action Pose - Ironhide's Battle with Megatron:
http://i245.photobucket.com/albums/g...9/DSC03025.jpg
http://i245.photobucket.com/albums/g...9/DSC03023.jpg
http://i245.photobucket.com/albums/g...9/DSC03021.jpg
http://i245.photobucket.com/albums/g...9/DSC03020.jpg
http://i245.photobucket.com/albums/g...9/DSC03012.jpg
http://i245.photobucket.com/albums/g...9/DSC03009.jpg
http://i245.photobucket.com/albums/g...9/DSC03008.jpg

All in expose:
http://i245.photobucket.com/albums/g...9/DSC03027.jpg
http://i245.photobucket.com/albums/g...9/DSC03028.jpg
http://i245.photobucket.com/albums/g...9/DSC03029.jpg
http://i245.photobucket.com/albums/g...9/DSC03030.jpg
http://i245.photobucket.com/albums/g...9/DSC03033.jpg
http://i245.photobucket.com/albums/g...9/DSC03034.jpg

Hope you guys like it.

I am fully itching to start the next project.

Regards

Kelvinchang99

Ol' Ironhide fits in perfectly... :)

I'm guessing the only TF who gave you trouble standing in the 2nd last pic was Megs... :(

Hmmm, which MP will be next...? Arcee? ;)

Nice. What is the next project?