Liokaiser, Jallguar and Leozack

[snaketales]

Finally made a 6-member Liokaiser.
Repainted a KO Air Raid and Swindle. Left the stock heads because A they're not seen in gestalt mode and B Shapeways shipping is a killer.
Liokaiser is a parts-former - the gestalt head has to be plugged in and Jallguar's combiner plug is removeable.
Leozack's combiner plug slides into the gap for combined mode.
His tail fins are also held between Jallguar's head and shoulders round the back.
Liokaiser is held together by rods that are a perfect fit for the screwholes on the combiner pegs (made even tighter after a coat of paint).
I screwed some in to the soles of Jallguar's feet for the legs.
I plugged some into Leozack's arms for the gestalt arms. His arms are placed like in jet mode, and because it's a KO they're tight, so between the two it's pretty secure.
I managed to carry it up to the attic without it falling apart.










My earlier custom Leozack from a Cyclonus for the 5-member gestalt




I realised after these pics his left knee was wonky. It has since been posed properly.