I was wondering if someone could do me a favour in identifying if some recently acquired transformer weapons I have are legit. If I could have accurate measurements in terms of length and width of the weapons in question for those of you who already own these items than this would also be appreciated.

1st example: Kup musket laser. Mine is around 62.8mm in length (sorry no image).

2nd example: Hotrod long photon laser. Mine is around 61.9mm in length. It has a grey/silver streakiness to the quality of the plastic. It has the number 1 underneath near the hand post. The plastic is firm and not soft:
http://farm2.static.flickr.com/1302/...936509f3_b.jpg

3rd example: G2 Devastator magna laser. G2 is above and G1 below. Mine is roughly 76.2mm in length and is about .2 mm longer than my G1 Devastator rifle. The quality is slightly worse than my G1 example as it seems to have suffered slight mold degradation. In relation to this the left and right sides don't align exactly together and are out by about .2mm as can be seen in the second image:
http://farm2.static.flickr.com/1282/...69af4e4b_b.jpg
http://farm5.static.flickr.com/4014/...290e648d_b.jpg

4th example: G2 Devastator waist plate. Similar to my own G1 example. The plastic is soft:
http://farm5.static.flickr.com/4067/...009a7e4f_b.jpg
http://farm5.static.flickr.com/4045/...2a2ea09f_b.jpg

5th example: G2 Devastator leg connector. One of the main differences between this piece and the G1 piece is that the cannons on the leg connector seem to be made of the same softer plastic as the waist plate, is this G2 specific?
http://farm2.static.flickr.com/1280/...ffacff47_b.jpg
http://farm5.static.flickr.com/4041/...867c6e72_b.jpg