Ozformers Transformers Club of Australia


Go Back   Ozformers Transformers Club of Australia > Beyond the Spacebridge (Non-Transformers Section) > Lego

Sightings/Sales

Reply
 
Thread Tools Display Modes
  #21  
Old 31st October 2016, 10:10 AM
Lint's Avatar
Lint Lint is offline
Rank 6 - Deluxe Member
 
Join Date: 16th Jul 2008
Location: Melb
Posts: 3,582
Default

Quote:
Originally Posted by kup View Post
What's the autofindee? i just search for parts across stores.
If you create a parts wants list, Bricklink has an search algorithm that recommends a mix of stores that will best get you want. However this won't take into consideration postage and handling or minimum order quantities as those are not a measurable parameters in the Bricklink database. This is why I presumed you were not satisfied with your bricklink experience.

The_Black_Sheep's point is a good one and may help you get started. Though at the end of the day if your have a fixed design it doesn't change the fact that the bricks you need are the bricks you need though it might make you consider substitution of some of the less readily available parts in your design.
Reply With Quote
  #22  
Old 31st October 2016, 11:55 AM
kup's Avatar
kup kup is offline
Rank 6 - Deluxe Member
 
Join Date: 28th Dec 2007
Location: NSW
Posts: 14,693
Default

By limiting the search parameters to Australian stores only, I was able to put together the order. It was still a bit of work but that's understandable as this is a 'from scratch' somewhat large build.

There was a couple of odd things that I could only find in International stores so I also added a UK order. However most were from AU. I found Bricklink a bit overwhelming at first, specially with so many international stores that limit what you can order (one only limited you to multiples of 40 per part type) but now it's all done and I am a little wiser with using Bricklink.

Thanks for your help guys. I am awaiting invoices from the stores so hopefully everything will be alright and I can get on with the build
Reply With Quote
  #23  
Old 4th November 2016, 08:15 PM
Skullcruncher's Avatar
Skullcruncher Skullcruncher is offline
Rank 5 - Dedicated Member
 
Join Date: 26th Nov 2009
Location: Melbourne
Posts: 2,728
Default

Any tips on cleaning old lego? Anyone used the same whitening technique used on G1 Scourges for off coloured bricks?
Reply With Quote
  #24  
Old 4th November 2016, 10:11 PM
kup's Avatar
kup kup is offline
Rank 6 - Deluxe Member
 
Join Date: 28th Dec 2007
Location: NSW
Posts: 14,693
Default

Quote:
Originally Posted by Skullcruncher View Post
Any tips on cleaning old lego? Anyone used the same whitening technique used on G1 Scourges for off coloured bricks?
My guess is that it would work but keep in mind that the plastic eventually yellows back. You don't cure it just reverse it.
Reply With Quote
  #25  
Old 5th November 2016, 05:29 PM
SuspectimusPrime's Avatar
SuspectimusPrime SuspectimusPrime is offline
Rank 6 - Deluxe Member
 
Join Date: 14th Nov 2009
Location: Sydney
Posts: 2,779
Default

Quote:
Originally Posted by Skullcruncher View Post
Any tips on cleaning old lego? Anyone used the same whitening technique used on G1 Scourges for off coloured bricks?
I haven't tried this yet, but this technique looks simple and effective enough.
https://www.youtube.com/watch?v=HGagdufGvGM
__________________


変われ! ヘッドマスター! Kaware! Headmaster!
戦え! ヘッドマスター! Tatakae! Headmaster!

Reply With Quote
  #26  
Old 7th November 2016, 03:54 PM
Skullcruncher's Avatar
Skullcruncher Skullcruncher is offline
Rank 5 - Dedicated Member
 
Join Date: 26th Nov 2009
Location: Melbourne
Posts: 2,728
Default

Quote:
Originally Posted by SuspectimusPrime View Post
I haven't tried this yet, but this technique looks simple and effective enough.
https://www.youtube.com/watch?v=HGagdufGvGM
Excellent thanks - now to find the time... and to have the motivation at that time
Reply With Quote
  #27  
Old 19th November 2016, 07:52 PM
Jetfire in the sky's Avatar
Jetfire in the sky Jetfire in the sky is offline
Rank 6 - Deluxe Member
 
Join Date: 30th May 2011
Location: Townsville
Posts: 1,285
Default

Quote:
Originally Posted by Skullcruncher View Post
Excellent thanks - now to find the time... and to have the motivation at that time
Double dissolution!!
__________________
The later it gets, the less sense I will make (usually anything beyond 19:30 Qld time).
Reply With Quote
  #28  
Old 16th October 2017, 01:55 PM
SuspectimusPrime's Avatar
SuspectimusPrime SuspectimusPrime is offline
Rank 6 - Deluxe Member
 
Join Date: 14th Nov 2009
Location: Sydney
Posts: 2,779
Default

Are there any good guides out there for designing/Bricklinking your first custom?

I am considering building a custom TIE Fighter heavily based off the TFA mode - I'm thinking base frame + wing joint to keep things simple for myself, with colours heavily swapped out for shades of red. Looking for tips around:
* Going from ideation to LDD
* LDD to Bricklinking
* How to choose from Bricklink sellers etc. Maybe general weights/cost tables or calculator for different countries & perhaps delivery times (to save time researching into each country's national post website).
* Maybe a rule of the thumb number of spares as a % so the design is not royally screwed by a few missing critical pieces (I don't have disassembled sets to salvage from, so this project is do or die).
* Anything else a noob should be aware of?

Thanks in advance guys.
__________________


変われ! ヘッドマスター! Kaware! Headmaster!
戦え! ヘッドマスター! Tatakae! Headmaster!

Reply With Quote
  #29  
Old 17th October 2017, 09:55 AM
kup's Avatar
kup kup is offline
Rank 6 - Deluxe Member
 
Join Date: 28th Dec 2007
Location: NSW
Posts: 14,693
Default

Quote:
Originally Posted by SuspectimusPrime View Post
Are there any good guides out there for designing/Bricklinking your first custom?

I am considering building a custom TIE Fighter heavily based off the TFA mode - I'm thinking base frame + wing joint to keep things simple for myself, with colours heavily swapped out for shades of red. Looking for tips around:
* Going from ideation to LDD
* LDD to Bricklinking
* How to choose from Bricklink sellers etc. Maybe general weights/cost tables or calculator for different countries & perhaps delivery times (to save time researching into each country's national post website).
* Maybe a rule of the thumb number of spares as a % so the design is not royally screwed by a few missing critical pieces (I don't have disassembled sets to salvage from, so this project is do or die).
* Anything else a noob should be aware of?

Thanks in advance guys.
I am putting the final touches on my own custom. It has taken me ages to do as it ended up much more complex that I first thought. I had to take it as a learning step bit by bit as I never found suitable guides. It was basically an evolution. As I went on building it, I kept revising the build based on functionality and vision of what I wanted to accomplish. There were a lot of compromises along the way too. Also structural integrity was a big concern, specially around moving or pressure parts.

Unless there is already something pre-existing that matches your custom build closely, you just need to get a basic design plan, order a few bricks and then begin with the foundation. As you build it, you will know what other parts you will require.
Reply With Quote
  #30  
Old 17th October 2017, 03:00 PM
SuspectimusPrime's Avatar
SuspectimusPrime SuspectimusPrime is offline
Rank 6 - Deluxe Member
 
Join Date: 14th Nov 2009
Location: Sydney
Posts: 2,779
Default

Quote:
Originally Posted by kup View Post
I am putting the final touches on my own custom. It has taken me ages to do as it ended up much more complex that I first thought. I had to take it as a learning step bit by bit as I never found suitable guides. It was basically an evolution. As I went on building it, I kept revising the build based on functionality and vision of what I wanted to accomplish. There were a lot of compromises along the way too. Also structural integrity was a big concern, specially around moving or pressure parts.

Unless there is already something pre-existing that matches your custom build closely, you just need to get a basic design plan, order a few bricks and then begin with the foundation. As you build it, you will know what other parts you will require.
Thanks for your feedback, kup. Glad to hear that project you mentioned earlier is drawing to a close!

Time is against me on this project, as I want it for a specific purpose. Though if I don't make it I do have a plan B and C. The general idea was to swap out colours from 75101, however it has evolved to changing the wings and potentially adding a payload section. I figured if my other adjustments are symmetrical then it should retain structural integrity (much higher than pre-2013 sets).

I downloaded LDD last night and had a play with it. Seems easy enough however there's no way to test for structural integrity. I'm trying to limit multi-angled joints so in theory (going to eat these words) I should be able to save myself multiple orders and seriously save on time/reordering.

Just want to achieve the minimum viable product here. Not adding moving parts, additional play features, or too many others parts that offsets the centre of gravity. Got ideas on extra features, but I might only consider those after the first build is done. Plenty of silly add-ons and mods ideas out there to play with later on: http://i.imgur.com/qG4lpz3.jpg
__________________


変われ! ヘッドマスター! Kaware! Headmaster!
戦え! ヘッドマスター! Tatakae! Headmaster!

Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 01:35 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.