Fan-backed Hasbro project: Unicron

[Sinnertwin]

BBTS have also opened up their preorders for him at $775.
I expect other stores to jump aboard soon to boost backing.

[griffin]

Obviously for those outside america, or those in america who miss the cut off... but the hasbro pulse site says limit of 5 which seems stupid for preventing online stores from buying up a heap to then sell off with a payment plan... which I'd go for if it wasn't too much more.

[Sinnertwin]

Im beginning to think that this project will go ahead regardless if BBTS are offering up to 10 units per customer per preorder.

[DELTAprime]

Obviously for those outside america, or those in america who miss the cut off... but the hasbro pulse site says limit of 5 which seems stupid for preventing online stores from buying up a heap to then sell off with a payment plan... which I'd go for if it wasn't too much more.

I noticed the 5 Unicron limit. It actually says "5 per transaction". So if BBTS wanted to buy 50 Unicrons it sounds like they would just need to place 10 orders.

I'm actually considering ordering him from BBTS.

[BigTransformerTrev]

I'm hoping that Hasbro America comes to it's senses and allocates stock to other countries, including ours, but the massive size of this toy would never be profitable to Hasbro if they tried to sell it through retailers and online stores just to get the production numbers up.

With Hasbro selling these, it cuts the price by about 35-40% as retailers and online stores mark up by the usual* 50-60% (or more to cover the risk of a more expensive item)... plus the extra expense of shipping to the retailer/online store from Hasbro, before it is then shipped to the customers.
(the "usual" 50-60% markup is taken from wholesale price listings I have been sent in the past, which follows most retailing markups, having the wholesale price being a little under 2-3rds of the retail price)

As such, a US$575 toy from Hasbro would need to be sold to retailers and online stores for less than US$345 (which would include shipping to the retailers, as the US$575 price includes shipping to customers from Hasbro). So for online stores to sell one and add on shipping to their customer, it would need to be even cheaper than US$345 from Hasbro to come to less than US$575 (including shipping) from an online store. And to get to a cheaper price at retail or online store, you just have see that Hasbro would have to sell it for significantly less than US$345 in order for a retailer or online store to sell it for significantly less than US$575.
I think it would need to be at least half the current price for a significant number of people to buy it for a more general release, but then Hasbro probably wouldn't be able to produce it at a profit.
I imagine that these would be the things that their accountants would be working out beforehand, in order to determine what is a minimum price to make it profitable and then adjust the price up according to how many people would be expected to buy one - if their bosses say that they need to raise at least US$4.6 million before it goes ahead, and lets say that it would cost them at least US$400 per unit to produce to cover all expenses and minimum profit (this is not the actual figure, but I'm just using it as an example, based on MP-44 Optimus having an estimated US$260 wholesale price for it to be US$440 at Ent-Earth, and Unicron is a lot bigger), then they would have needed to sell 11,600 units at that price to raise the same amount. Maybe they assumed that number was too big a goal to reach at that price, so reduced it down to a goal of 8,000 backers, which raises each unit to needing US$575 to make it happen.
(if my estimate for a wholesale price of US$260 for MP-44 is close, it would make it really unlikely that Hasbro could produce Unicron to sell to retailers for less than US$400, which would then mean a retail price of over US$600 - my guess is that people at Hasbro worked this out, and realised that to make it more affordable to fans, they would need to sell it themselves

Thank you for that explanation

BBTS have also opened up their preorders for him at $775.
I expect other stores to jump aboard soon to boost backing.

Obviously for those outside america, or those in america who miss the cut off... but the hasbro pulse site says limit of 5 which seems stupid for preventing online stores from buying up a heap to then sell off with a payment plan... which I'd go for if it wasn't too much more.

Yes if only there was a lay-by option with the online retailers where you could pay off a certain amount each month. I can't justify shelling out so much in one go but if I could pay off $100 a month then I could swing it. I wonder if BBTS would be open to the proposition.

[DELTAprime]

Yes if only there was a lay-by option with the online retailers where you could pay off a certain amount each month. I can't justify shelling out so much in one go but if I could pay off $100 a month then I could swing it. I wonder if BBTS would be open to the proposition.

Just do what I do when there's no lay-buy, set up a free savings account with your bank and put however much you feel is right into that account each week/fortnight/month until you reach your goal. After you've paid for the super expensive item you want, close off that account.

[Borgeman]

Ultimately the dollar amount isn't the crucial hurdle, but rather how to get it here. BBTS estimate around a $400 shipping cost, but it's likely to be more.
It's likely Unicron will be boxed in planet mode with the rings detached, so based on planet diameter of roughly 15 inches (30 inch dimensions of the planet with rings, based off imagery the rings account for half the total diameter) a safe estimated box size will be a 20inch cube, or roughly 50cm cubed.

USPS quotes me a tick under $500usd.
Using shipito's calc gave me options between $300-$400usd.

Long story short, plenty more cash on top.

[DaptoDog]

I really want this. If I could I would have it shipped to my MYUS shipping address, it would only cost ~$120 to have it shipped here. But alas I assume they won't accept an Australian card for payment?

Ultimately the dollar amount isn't the crucial hurdle, but rather how to get it here. BBTS estimate around a $400 shipping cost, but it's likely to be more.
It's likely Unicron will be boxed in planet mode with the rings detached, so based on planet diameter of roughly 15 inches (30 inch dimensions of the planet with rings, based off imagery the rings account for half the total diameter) a safe estimated box size will be a 20inch cube, or roughly 50cm cubed.

USPS quotes me a tick under $500usd.
Using shipito's calc gave me options between $300-$400usd.

Long story short, plenty more cash on top.

I've checked the terms of the MyUS shipping rates based on weight. They specify their rates "excludes oversized shipments and palletized shipments with linear dimensions greater than 80 inches (203 cm).​".

Linear dimensions simply means to add the length, width and depth of the package. So taking Borgeman's assumptions of a 20 inch cube would give 60 inch linear dimensions, well within the 80 inch limit and therefore giving us some leeway on the dimensions.

Then it all comes down to weight. We know that Unicron has a weight of 19 pounds. So if we very conservatively assume a packaged weight of 30 pounds, it gives a shipping cost of US$143 using Fedex Economy. But I'm a member and pay with Amex, which gives me a 30% discount off this rate. Therefore given the current A$ is 0.70, my estimated cost is A$143, way cheaper than BBTS and Shipito that base their charges on volumetric weight.

You can test this for yourself at https://www.myus.com/pricing/

The only risk I can see is if MyUS changes their policy and moves to volumetric weight at some point before this is released in 2021.

[philby]

How is BBTS offering pre orders on something which is not even potentially being made?

[BigTransformerTrev]

Just do what I do when there's no lay-buy, set up a free savings account with your bank and put however much you feel is right into that account each week/fortnight/month until you reach your goal. After you've paid for the super expensive item you want, close off that account.

That works, so long as the item is still available after you’ve done all that saving. Given his cost Unicron might well be I guess (if he gets made)

It’s why I missed out on G1 Scorponok as a kid, hadn’t heard of lay-bys so simply saved my pocket money for months and when I went in he’d been sold