Wheels turned out ok. With masking its always a lottery as to what kind of finish I get.



Steering wheel turned out less than perfect but I'll use it.



Ok to mount the rear wheels I needed plastic tubing of varying sizes



Cut down the original stub.



Cut tubing to size. I had to do a couple of test runs to get the size right.



The smaller diameter fits on the stub, the larger on the back of the brake disc.



Voila!





For the front I had to cut down and drill the original assembly. Original on right, modified on left.



I got just the right diameter so it fits snug with no glue.





Poly caps hold the wheels in place and allow it to spin.