Things That Aren't Rocket Science.

[liegeprime]

CAR Arcee... granted that the figure is "said" to be coming up soon but with it 's release being pushed back and back and back and Hasbro's NOTORIOUS history of F@%E^% up this figure and releasing all them 2 wheelers instead or not releasing a planned one at all --- Titanium Arcee. Getting past the big hurdle of issuing the darn generations figure alone is both annoying, exasperating and frustrating as!

figures that even KOers with limited budget can do but HasTakTom seem to really miss the point on why those figures sells - because you freakin won't give us an official one, that's why!!! Stop issuing us endless bumblebee that shelf warms now...



DONT KILL OFF ENCORE LINE TAKARA!!!
Reissue G1 Dinobots for Encore line....
I agree with an Encore Reflector
Encore Coneheads - Thrust and Ramjet - they've already redone dirge so obviously they can do the other two.
Generations Brawn and Huffer - these two are the only ones left from the early autobots batch that doesn't get a figure
Encore TrypticonEncore Blitzwing - the mold is there - you've done it for the Booktype reissues why not again? lots of people still need it for their collection
Encore Sharkticon Gnaw - if the KOer's can do it, so CAN you!! and this is Army builders fodder... those people (eherm) alone can buy a whole lot to cover the sale of said figure.
Retromould and give us Encore Mirage, Sunstreaker and Wheeljack!!

Generations Kickback - I've seen pics of Bombshell on the way so hopefully they don't F@$% us up by not issuing the 3rd and last one of the trio -

and as an idea I mentioned in another thread - why not make their guns the other two components of Reflector - Targetmaster partners Bombshell could have Spectro and thenKickback can have Spyglass or vicevversa doesn't matter, as long as they DO IT!!

I'd even accept that as Generations reflector... they can then sell it as a three pack even if they don't combine, they can sell it as a weapons upgrade pack /figures kinda like the minicons three packs in Armada. But at least there's a representative of that often forgotten character --- and I thought Skids had the Powers of Obscurity alone....

[BigTransformerTrev]

For stuff that isn't rocket science, I thought doing toys of characters that have never had a toy before would be a good idea. It's taken nearly 3 decades since their intital appearences to get G1-based Chromia and Arcee toys. So I'd like to see more like that such as Elita-1, a mass produced Devcon etc. Also some Quintesson toys wouldn't go astray so I dont haver to keep buying 3rd party ones.

Also, either a Generations based cartoon or another animated movie - it so could be done!

Generations Kickback - I've seen pics of Bombshell on the way so hopefully they don't F@$% us up by not issuing the 3rd and last one of the trio -

Don't think I've seen Bombshell so this is welcome news to me. I quite like FOC Kickback but it would be good to have one in scale with the other two.

[Verno]

Hasbro loves repainting toys, right? Seemingly at random at times, yes? But a blindingly obvious set of repaints they've overlooked is a series of G1 Seekers from the Transmetal Waspinator mold. The thing transforms into a jet!

[GoktimusPrime]

I would like to retrospectively include the Classicsverse Seekers on this list. Although all of them have now been released as regular store releases, we spent a good five years waiting for it! For half a decade I kept on thinking that releasing all the Seekers was a no-brainer. It eventually was, but talk about a looong wait between figures! Quite a few of us ended up forking out higher prices for the BotCon and Gentei exclusive Seekers because it seemed unlikely at the time that Hasbro would release them in stores. I can't believe that Hasbro released Acid Storm before releasing Thundercracker, Thrust and Dirge! I totally agree with Tober's suggestion of releasing the Coneheads as MPs.

IMO reissuing the Dinobots isn't an "obvious" choice, as TakaraTOMY have reportedly lost the moulds and have stated that even rebuilding part of a mould is very expensive and not worth the expenditure. The only time it's been done was for the reissue of the original G1 Convoy mould, and even then it was really cast from the 1993 G2 mould with reconstructed arms. And of course, that toy has become the single most reissued toy in Transformers history. I'm not sure if the Dinobots have as much re-re-re-re-re-reissue potential, and rebuilding the entire moulds would be more costly than just rebuilding arms. Look at how expensive recent BotCon and TFCC exclusives have become to, I assume, offset the cost of some new heads. Keep in mind that Takara(TOMY) produces reissues in limited numbers too (as they are explicitly targeting the collectors niche market).

CAR Arcee... granted that the figure is "said" to be coming up soon but with it 's release being pushed back and back and back and Hasbro's NOTORIOUS history of F@%E^% up this figure and releasing all them 2 wheelers instead or not releasing a planned one at all --- Titanium Arcee. Getting past the big hurdle of issuing the darn generations figure alone is both annoying, exasperating and frustrating as!

They have done car Arcees (Binaltech, Animated), but we still haven't had a G1-based Carcee. C'mooon Generations Arcee!! Generations Arcee could very easily be repainted as Paradron Medic.

and as an idea I mentioned in another thread - why not make their guns the other two components of Reflector - Targetmaster partners Bombshell could have Spectro and thenKickback can have Spyglass or vicevversa doesn't matter, as long as they DO IT!!

^I like this idea. They could also make more money back from the Insecticons by repainting them as Salvo, Shothole and Zaptrap; again, each with repainted Reflectors. One of them should be a toy-accurate repaint of Viewfinder (i.e. dark blue instead of purple). Repaint another Reflector entirely in silver chrome (so it looks more G1-like in gun mode), and another one where the camera has more G1-accurate colours (e.g. black and silver barrel etc.).

P.S.:
More obscure character repaints; may be released as limited exclusives or store releases (e.g. MP Acid Storm & Sunstorm, MP Exhaust, Generations Crosscut etc.).
e.g.
+ Generations & MP Clamp Down
+ Generations & MP Deep Cover
+ MP Diaclone Ultra Magnus
+ Generations & MP generic purple Seeker
+ Generations/United "Protect" Ironhide
+ Generations (FoC) Battle Gaea
+ Generations/United Load Hauler
+ Generations Minimus Ambus (redeco of Generations Orion Pax)
+ Generations Dominus Ambus (redeco of Voyager Optimus Prime)
+ Generations/United Overcharge (repaint of Generations Blitzwing with fixed shoulder!)
+ Generations/United Eject & Rewind (redecos of United Frumble); potential repaints as Rosanna and Flipsides.
+ Generations/United Detritus w/ Glit and/or Howlback
+ Generations (data discs) & MP Cassettrons: Enemy, Howlback, Glit, Garboil

Also, a lot of Classicsverse figures could be done in their G2 colours as limited exclusives, as we've seen with Ramjet, Breakdown etc. They could even do them in unreleased G2 colours, such as Mirage etc.

[Lord_Zed]

Some of these answers read more like wish lists rather than how I interpret a no brainer for Hasbro or Tak/Tom. Some of the above ideas are pretty good though when it comes to obvious repaints to minor remolds.

I'm going to say why not release Blue Diaclone MP Bluestreak as a Decepticon? They have already set a precedent with Exhaust.

[Sky Shadow]

I'm going to say why not release Blue Diaclone MP Bluestreak as a Decepticon? They have already set a precedent with Exhaust.

Definitely - it's a colour scheme that the fandom demands, and a great opportunity for a new Decepticon car character.

[Paulbot]

They can have the Oilchange idea for free.