SDCC toy reveals for 2019

[griffin]

This year's SDCC for Transformers seems a bit strange to me... a HUGE focus on exclusives, with no new reveals for the main lines of Studio Series, Cyberverse, Botbots, and Rescue Bots... and only a small number of non-exclusive WFC toys.
It's almost like the large number of one-off collector toys this year is a separate "toyline" or division, as you'd need to spend more on the exclusives than you would on the regular mainline.
We now have to wait until NYCC in October for the next Hasbro event for public reveals.

[griffin]

Here's a couple of interesting (hidden) tidbits I came across from reading as much as I could from SDCC on the various fansites...

- The Reissue Japanese Dino cassettes were apparently NOT using the original moulds. I can't find the original source of this info, but it is claimed that the archived wooden prototypes were used to create a new batch of moulds for these reissues... so expect to see them milked a fair bit to make their money back off them.
(it also suggests that Hasbro can re-cast moulds/toolings of older toys if they want to... if it is deemed profitable enough - I wonder if we will see them or TakaraTomy digging out more of the original wooden moulds of the early years to reissue some more rarities)
I wonder why they used the original wooden prototypes, and get a set of the actual toys to use for the moulds/toolings.

- The "lost" Botbots series 1.5 sets (Bakery Bytes and Lawn League) are still intended for release, probably later this year. It's unknown as to why they were an add-on to series 1 (with updated series 1 checklist inserts), or why they weren't released at some point before series 2 came out.
It's quite possible that they were intended to be a store exclusive, but the retailer cancelled them after they were already in production.

[DELTAprime]

Here's a couple of interesting (hidden) tidbits I came across from reading as much as I could from SDCC on the various fansites...

- The Reissue Japanese Dino cassettes were apparently NOT using the original moulds. I can't find the original source of this info, but it is claimed that the archived wooden prototypes were used to create a new batch of moulds for these reissues... so expect to see them milked a fair bit to make their money back off them.
(it also suggests that Hasbro can re-cast moulds/toolings of older toys if they want to... if it is deemed profitable enough - I wonder if we will see them or TakaraTomy digging out more of the original wooden moulds of the early years to reissue some more rarities)
I wonder why they used the original wooden prototypes, and get a set of the actual toys to use for the moulds/toolings.

I've assumed for a long time they must be using a new G1 Optimus Prime mould. The original mould was replaced a long time ago by the G2 mould, but given how many times he's been reissued over the years I've assumed that G2 mould must have been replaced by now with a new mould.

[reillyd]

I've assumed for a long time they must be using a new G1 Optimus Prime mould. The original mould was replaced a long time ago by the G2 mould, but given how many times he's been reissued over the years I've assumed that G2 mould must have been replaced by now with a new mould.

There are notable mold differences with the hand and blaster rifle so that it can actually be held straight without hitting the arm. So yes definitely a different mold, and I suspect the reason the trailer wasn't included because that would be inordinately more expensive to make

[Krayt]

Original source was after last years cassettes came out...

https://www.allspark.com/forums/topi...ers/?p=3764265

Here's a couple of interesting (hidden) tidbits I came across from reading as much as I could from SDCC on the various fansites...

- The Reissue Japanese Dino cassettes were apparently NOT using the original moulds. I can't find the original source of this info, but it is claimed that the archived wooden prototypes were used to create a new batch of moulds for these reissues... so expect to see them milked a fair bit to make their money back off them.
(it also suggests that Hasbro can re-cast moulds/toolings of older toys if they want to... if it is deemed profitable enough - I wonder if we will see them or TakaraTomy digging out more of the original wooden moulds of the early years to reissue some more rarities)
I wonder why they used the original wooden prototypes, and get a set of the actual toys to use for the moulds/toolings.

- The "lost" Botbots series 1.5 sets (Bakery Bytes and Lawn League) are still intended for release, probably later this year. It's unknown as to why they were an add-on to series 1 (with updated series 1 checklist inserts), or why they weren't released at some point before series 2 came out.
It's quite possible that they were intended to be a store exclusive, but the retailer cancelled them after they were already in production.

[Tha_Phantom]

The Reissue Japanese Dino cassettes were apparently NOT using the original moulds. I can't find the original source of this info, but it is claimed that the archived wooden prototypes were used to create a new batch of moulds for these reissues... so expect to see them milked a fair bit to make their money back off them.

That's good to hear as I'm skipping the normal decos of Noizu and Gurafi in the hope there will be clear ones (since I only have the clear versions of the other two moulds).

[UltraMarginal]

Here's a couple of interesting (hidden) tidbits I came across from reading as much as I could from SDCC on the various fansites...

- The Reissue Japanese Dino cassettes were apparently NOT using the original moulds. I can't find the original source of this info, but it is claimed that the archived wooden prototypes were used to create a new batch of moulds for these reissues... so expect to see them milked a fair bit to make their money back off them.
(it also suggests that Hasbro can re-cast moulds/toolings of older toys if they want to... if it is deemed profitable enough - I wonder if we will see them or TakaraTomy digging out more of the original wooden moulds of the early years to reissue some more rarities)
I wonder why they used the original wooden prototypes, and get a set of the actual toys to use for the moulds/toolings.

this is exciting news, I'd love the first two tapes they released last year, without the burden of an unwanted bumblebee toy.
And I'd love to see some Re-issue love for moulds that have never been done, Mirage, Swoop, Wheeljack... the list goes on.

[Paulbot]

It occured to me that with all the hype about Unicron we forgot that there wasn't a Titan class toy announced at SDCC.

I wonder if the Seacon toys could be released as a set at the Titan price point?

[griffin]

It occured to me that with all the hype about Unicron we forgot that there wasn't a Titan class toy announced at SDCC.

I wonder if the Seacon toys could be released as a set at the Titan price point?

Yeah... rumours were circulating that the next Titan would be announced at SDCC. Maybe with Omega Supreme still yet to be released, it was better to be promoting that one, without dividing the attention of people between two upcoming Titans.

I hope the Seacon set isn't at the Titan price point, as those six would add up to AU$200 on their own, and Titans haven't been at that price since Metroplex. It would be an extra $100 just for being in the one box.

[Paulbot]

Assuming these are Generations Select toys when released (or Takara Toy Store specials) they’ll probably cost as much as a titan to collect — at which point in one box would be a nicer way to get them.